CISCO-LWAPP-CCX-RM-MIB-V1SMI.my

-- MIB file created 23-Feb-2012 09:05:55, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-LWAPP-CCX-RM-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-LWAPP-CCX-RM-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    MacAddress, TruthValue, TimeInterval, TimeStamp
            FROM SNMPv2-TC-v1
    cLWlanIndex
            FROM CISCO-LWAPP-WLAN-MIB
    cLApSysMacAddress, cLApDot11IfSlotId
            FROM CISCO-LWAPP-AP-MIB
    ciscoMgmt
            FROM CISCO-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoLwappCcxRmMIB OBJECT IDENTIFIER ::= { ciscoMgmt 520 }
-- MODULE-IDENTITY
--  LastUpdated
--    201202210000Z
--  OrgName
--    Cisco Systems Inc.
--  ContactInfo
--    Cisco Systems,
--    Customer Service
--    Postal: 170 West Tasman Drive
--    San Jose, CA  95134
--    USA
--    Tel: +1 800 553-NETS
--    
--    Email: cs-aironet@cisco.com
--  Descr
--    This MIB is intended to be implemented on all those
--    devices operating as Central controllers, that
--    terminate the Light Weight Access Point Protocol
--    tunnel from Cisco Light-weight LWAPP Access Points.
--    
--    Information provided by this MIB is for CCX related 
--    features as specified in the CCX specifications. 
--    
--    The relationship between CC and the LWAPP APs
--    can be depicted as follows:
--    
--    +......+     +......+     +......+           +......+
--    +      +     +      +     +      +           +      +
--    +  CC  +     +  CC  +     +  CC  +           +  CC  +
--    +      +     +      +     +      +           +      +
--    +......+     +......+     +......+           +......+
--    ..            .             .                 .
--    ..            .             .                 .
--    .  .            .             .                 .
--    .    .            .             .                 .
--    .      .            .             .                 .
--    .        .            .             .                 .
--    +......+ +......+     +......+      +......+          +......+
--    +      + +      +     +      +      +      +          +      +
--    +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
--    +      + +      +     +      +      +      +          +      +
--    +......+ +......+     +......+      +......+          +......+
--    .              .             .                 .
--    .  .              .             .                 .
--    .    .              .             .                 .
--    .      .              .             .                 .
--    .        .              .             .                 .
--    +......+ +......+     +......+      +......+          +......+
--    +      + +      +     +      +      +      +          +      +
--    +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
--    +      + +      +     +      +      +      +          +      +
--    +......+ +......+     +......+      +......+          +......+
--    
--    
--    The LWAPP tunnel exists between the controller and
--    the APs.  The MNs communicate with the APs through
--    the protocol defined by the 802.11 standard.
--    
--    LWAPP APs, upon bootup, discover and join one of the
--    controllers and the controller pushes the configuration,
--    that includes the WLAN parameters, to the LWAPP APs.
--    The APs then encapsulate all the 802.11 frames from
--    wireless clients inside LWAPP frames and forward
--    the LWAPP frames to the controller.
--    
--                       GLOSSARY
--    
--    Access Point ( AP )
--    
--    An entity that contains an 802.11 medium access
--    control ( MAC ) and physical layer ( PHY ) interface
--    and provides access to the distribution services via
--    the wireless medium for associated clients.  
--    
--    LWAPP APs encapsulate all the 802.11 frames in
--    LWAPP frames and sends them to the controller to which
--    it is logically connected.
--    
--    Central Controller ( CC )
--    
--    The central entity that terminates the LWAPP protocol
--    tunnel from the LWAPP APs.  Throughout this MIB,
--    this entity also referred to as 'controller'.
--    
--    Cisco Compatible eXtensions (CCX)
--    
--    Wireless LAN Access Points (APs) manufactured by Cisco
--    Systems have features and capabilities beyond those in
--    related standards (e.g., IEEE 802.11 suite of 
--    standards, Wi-Fi recommendations by WECA, 802.1X 
--    security suite, etc). A number of features provide 
--    higher performance. For example, Cisco AP transmits a 
--    specific Information Element, which the clients adapt 
--    to for enhanced performance. Similarly, a number of 
--    features are implemented by means of proprietary 
--    Information Elements, which Cisco clients use in 
--    specific ways to carry out tasks above and beyond the
--    standard. Other examples of feature categories are 
--    roaming and power saving.
--    
--    Light Weight Access Point Protocol ( LWAPP ) 
--    
--    This is a generic protocol that defines the 
--    communication between the Access Points and the
--    Central Controller.
--    
--    Mobile Node ( MN )
--    
--    A roaming 802.11 wireless device in a wireless
--    network associated with an access point.  The terms  
--    'Mobile node' and 'client' are used interchangeably. 
--    
--    Radio Management (RM)
--    
--    This term refers to managing the 802.11 radio
--    environment to provide the best quality service to
--    to the 802.11 wireless clients. 
--    
--    Service Set Identifier ( SSID ) 
--    
--    SSID is a unique identifier that APs and clients
--    use to identify with each other.  SSID is a simple
--    means of access control and is not for security.
--    The SSID can be any alphanumeric entry up to 32
--    characters.
--    
--    REFERENCE
--    
--    [1] Wireless LAN Medium Access Control ( MAC ) and
--    Physical Layer ( PHY ) Specifications
--    
--    [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
--    Weight Access Point Protocol
--  RevDate
--    201202210000Z
--  RevDescr
--    Added ciscoLwappCcxRmDot11aConfigGroupVer1,
--    ciscoLwappCcxRmDot11bConfigGroupVer1,
--    and ciscoLwappCcxRmApIfConfigGroupVer1. 
--    Deprecated ciscoLwappCcxRmDot11aConfigGroup,
--    ciscoLwappCcxRmDot11bConfigGroup,
--    and ciscoLwappCcxRmApIfConfigGroup. 
--    Added ciscoLwappCcxRmMIBComplianceVer1 and 
--    deprecated ciscoLwappCcxRmMIBCompliance.
--  RevDate
--    200604110000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoLwappCcxRmMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIB 0 }
ciscoLwappCcxRmMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIB 1 }
ciscoLwappCcxRmMIBConform OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIB 2 }
clcrDot11aConfigGlobal OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBObjects 1 }
clcrDot11bConfigGlobal OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBObjects 2 }
clcrApIfConfig  OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBObjects 3 }
clcrClientMeasurementReport OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBObjects 4 }
clcrWlanConfig  OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBObjects 5 }
ciscoLwappCcxRmMIBCompliances OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBConform 1 }
ciscoLwappCcxRmMIBGroups OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBConform 2 }

clcrdot11aBeaconEnabled OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When set to 'true', LWAPP APs broadcast radio
        measurement request messages that include a
        beacon measurement request information element
        on 802.11a radio to clients compatible to
        CCX versions 2 and above.  This configuration
        takes higher precedence than that on the radio
        interface of the particular AP when 
        clcrAPIfOverrideGlobal is set to 'false'."
    DEFVAL { false }
    ::= { clcrDot11aConfigGlobal 1 }

clcrdot11aBeaconInterval OBJECT-TYPE
    SYNTAX TimeInterval(6000..3240000)
--    Rsyntax INTEGER(6000..3240000)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "The interval in hundredths of a second, in
        which the AP issues radio measurement request 
        message to client periodically for every SSID. 
        
        This configuration takes higher precedence than
        that on the radio interface of the particular AP
        when clcrAPIfOverrideGlobal is set to 'false'.
        clcrdot11aBeaconInterval object is superseded by 
        clcrdot11aBeaconIntvl."
    DEFVAL { 6000 }
    ::= { clcrDot11aConfigGlobal 2 }

clcrdot11aBeaconIntvl OBJECT-TYPE
    SYNTAX TimeInterval
--    Rsyntax INTEGER(0..2147483647)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The interval in hundredths of a second, in
        which the AP issues radio measurement request 
        message to client periodically for every SSID. 
        
        This configuration takes higher precedence than
        that on the radio interface of the particular AP
        when clcrAPIfOverrideGlobal is set to 'false'."
    ::= { clcrDot11aConfigGlobal 3 }

clcrdot11bBeaconEnabled OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When set to 'true', LWAPP APs broadcast radio
        measurement request messages that include a
        beacon measurement request information element,
        on 802.11b/802.11g radio to clients compatible to
        CCX versions 2 and above.  This configuration
        takes higher precedence than that on the radio
        interface of the particular AP when 
        clcrAPIfOverrideGlobal is set to 'false'."
    DEFVAL { false }
    ::= { clcrDot11bConfigGlobal 1 }

clcrdot11bBeaconInterval OBJECT-TYPE
    SYNTAX TimeInterval(6000..3240000)
--    Rsyntax INTEGER(6000..3240000)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "The interval in hundredths of a second, at
        which the AP issues radio measurement request 
        message to client periodically for every SSID.
        
        This configuration takes higher precedence than
        that on the radio interface of the particular AP
        when clcrAPIfOverrideGlobal is set to 'false'.
        clcrdot11bBeaconInterval object is superseded by 
        clcrdot11bBeaconIntvl."
    DEFVAL { 6000 }
    ::= { clcrDot11bConfigGlobal 2 }

clcrdot11bBeaconIntvl OBJECT-TYPE
    SYNTAX TimeInterval
--    Rsyntax INTEGER(0..2147483647)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The interval in hundredths of a second, at
        which the AP issues radio measurement request 
        message to client periodically for every SSID.
        
        This configuration takes higher precedence than
        that on the radio interface of the particular AP
        when clcrAPIfOverrideGlobal is set to 'false'."
    ::= { clcrDot11bConfigGlobal 3 }

clcrAPIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ClcrAPIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table represents the CCX related parameters on
        the radio interface of the APs.  The values configured
        through the objects of this table are passed onto the
        AP by the controller, when the AP joins the 
        controller. 
        
        There exists a row in this table for each conceptual row
        in cLApDot11IfTable that represents a dot11 interface
        of an AP."
    ::= { clcrApIfConfig 1 }

clcrAPIfEntry OBJECT-TYPE
    SYNTAX ClcrAPIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry represents a conceptual row in this table.
        An entry corresponding to each dot11 interface of an
        AP is added to this table when the AP joins the
        controller and deleted when AP disassociates from the
        controller."
    INDEX { cLApSysMacAddress, cLApDot11IfSlotId }
-- Augments cLApDot11IfEntry FROM CISCO-LWAPP-AP-MIB
    ::= { clcrAPIfTable 1 }

ClcrAPIfEntry ::= SEQUENCE {
    clcrAPIfOverrideGlobal TruthValue,
    clcrAPIfBeaconEnabled TruthValue,
    clcrAPIfBeaconInterval TimeInterval,
    clcrAPIfBeaconIntvl TimeInterval
    }

clcrAPIfOverrideGlobal OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "If this object is set to 'true', values populated
        through clcrAPIfBeaconEnabled and
        clcrAPIfBeaconInterval are considered for sending
        beacon measurement requests.
        
        If this object is set to 'false', the values 
        configured through the objects 
        clcrdot11bBeaconEnabled, clcrdot11aBeaconEnabled,
        clcrdot11bBeaconInterval and clcrdot11aBeaconInterval
        take precedence and are used for sending beacon
        measurement requests."
    DEFVAL { false }
    ::= { clcrAPIfEntry 1 }

clcrAPIfBeaconEnabled OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When set to 'true', LWAPP APs broadcast radio
        measurement request messages that include a
        beacon measurement request information element
        to clients compatible with CCX versions 2 and
        above.
        
        Global configuration at network level takes
        higher precedence if clcrAPIfOverrideGlobal is
        set to 'false'.  Radio measurement frames include 
        a beacon request information element for every
        channel over which the measurement needs
        to be performed.  The measurement requests are
        repeated at every interval configured through
        clcrAPIfBeaconInterval."
    DEFVAL { false }
    ::= { clcrAPIfEntry 2 }

clcrAPIfBeaconInterval OBJECT-TYPE
    SYNTAX TimeInterval(6000..3240000)
--    Rsyntax INTEGER(6000..3240000)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "The interval at which the AP sends radio measurement
        request messages to the clients associated through
        each and every SSID.
        clcrAPIfBeaconInterval object is superseded by 
        clcrAPIfBeaconIntvl."
    DEFVAL { 6000 }
    ::= { clcrAPIfEntry 3 }

clcrAPIfBeaconIntvl OBJECT-TYPE
    SYNTAX TimeInterval
--    Rsyntax INTEGER(0..2147483647)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The interval at which the AP sends radio measurement
        request messages to the clients associated through
        each and every SSID."
    ::= { clcrAPIfEntry 4 }

clcrClientBeaconReportTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ClcrClientBeaconReportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table reports the received signal power as seen
        by a wireless client when conducting radio
        measurements.  Clients measure the received signal
        power by observing the beacon requests and probe
        response messages on all the specified channels and
        pass them to the APs through beacon reports.
        
        An entry is added to the table by the agent when the
        beacon report sent by the client arrives at the dot11
        interface of an AP.  An existing entry for a client
        gets over-written when the subsequent reports arrive
        at an AP from that client.  The term 'client' here
        refers to all the wireless CCX compliant devices like
        mobile stations, tags etc.
        
        An entry is deleted from this table when the particular
        client dissociates from the AP.  The entry also gets
        deleted when the AP dissociates from the controller."
    ::= { clcrClientMeasurementReport 1 }

clcrClientBeaconReportEntry OBJECT-TYPE
    SYNTAX ClcrClientBeaconReportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry represents a conceptual row in this table
        and populates the received signal power as observed
        and reported by the respective client."
    INDEX { clcrClientMacAddress, cLApSysMacAddress, cLApDot11IfSlotId }
    ::= { clcrClientBeaconReportTable 1 }

ClcrClientBeaconReportEntry ::= SEQUENCE {
    clcrClientMacAddress MacAddress,
    clcrClientRxPowerSignal INTEGER,
    clcrClientTimeStamp TimeStamp
    }

clcrClientMacAddress OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the MAC address of a
        client that has sent a beacon report to the
        AP."
    ::= { clcrClientBeaconReportEntry 1 }

clcrClientRxPowerSignal OBJECT-TYPE
    SYNTAX INTEGER(-90..30)
--  Units
--    dBm
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object represents the signal strength of the
        beacon or probe response frame as seen by the
        client."
    ::= { clcrClientBeaconReportEntry 2 }

clcrClientTimeStamp OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object represents the value of sysUpTime at
        which the beacon measurement report was 
        received."
    ::= { clcrClientBeaconReportEntry 3 }

clcrWlanTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ClcrWlanEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table represents the CCX parameters of a
        particular WLAN.
        
        There exist a row in this table corresponding to each
        row representing a WLAN in cLWlanConfigTable."
    ::= { clcrWlanConfig 1 }

clcrWlanEntry OBJECT-TYPE
    SYNTAX ClcrWlanEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry represents a conceptual row in this table
        and provides information about the CCX capabilities
        of the WLAN."
    INDEX { cLWlanIndex }
-- Augments cLWlanConfigEntry FROM CISCO-LWAPP-WLAN-MIB
    ::= { clcrWlanTable 1 }

ClcrWlanEntry ::= SEQUENCE {
    clcrVersionIESupport TruthValue,
    clcrAironetIESupport TruthValue
    }

clcrVersionIESupport OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the support for the Cisco
        Compatible Extensions Version information element
        on this WLAN.
        
        A value of 'true' indicates the presence of the
        support and 'false' indicates the absence of the
        same."
    ::= { clcrWlanEntry 1 }

clcrAironetIESupport OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object indicates the support for the Cisco
        Compatible Extensions Aironet information element
        on this WLAN. 
        
        The support is enabled or disabled by setting 
        this object to 'true' or 'false' respectively."
    DEFVAL { false }
    ::= { clcrWlanEntry 2 }

ciscoLwappCcxRmDot11aConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    This collection of objects represent the beacon
--    request and beacon interval parameters for 802.11a
--    networks.
--    ciscoLwappCcxRmDot11aConfigGroup object is superseded by 
--    ciscoLwappCcxRmDot11aConfigGroupVer1.
--  objects
--    clcrdot11aBeaconEnabled, clcrdot11aBeaconInterval

ciscoLwappCcxRmDot11bConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    This collection of objects represent the beacon
--    request and beacon interval parameters for 802.11b
--    networks.
--    ciscoLwappCcxRmDot11bConfigGroup object is superseded by 
--    ciscoLwappCcxRmDot11bConfigGroupVer1.
--  objects
--    clcrdot11bBeaconEnabled, clcrdot11bBeaconInterval

ciscoLwappCcxRmApIfConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    This collection of objects represent the beacon
--    request and beacon interval parameters for the
--    respective 802.11 radio interfaces.
--    ciscoLwappCcxRmApIfConfigGroup object is superseded by 
--    ciscoLwappCcxRmApIfConfigGroupVer1.
--  objects
--    clcrAPIfOverrideGlobal, clcrAPIfBeaconEnabled, 
--    clcrAPIfBeaconInterval

ciscoLwappCcxRmBeaconReportGroup OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects represent information
--    about the beacon reports received from CCX 
--    clients.
--  objects
--    clcrClientRxPowerSignal, clcrClientTimeStamp

ciscoLwappCcxRmD11WlanConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects represent the CCX
--    settings on a particular WLAN.
--  objects
--    clcrVersionIESupport, clcrAironetIESupport

ciscoLwappCcxRmDot11aConfigGroupVer1 OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects represent the beacon
--    request and beacon interval parameters for 802.11a
--    networks.
--  objects
--    clcrdot11aBeaconEnabled, clcrdot11aBeaconIntvl

ciscoLwappCcxRmDot11bConfigGroupVer1 OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 7 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects represent the beacon
--    request and beacon interval parameters for 802.11b
--    networks.
--  objects
--    clcrdot11bBeaconEnabled, clcrdot11bBeaconIntvl

ciscoLwappCcxRmApIfConfigGroupVer1 OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBGroups 8 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects represent the beacon
--    request and beacon interval parameters for the
--    respective 802.11 radio interfaces.
--  objects
--    clcrAPIfOverrideGlobal, clcrAPIfBeaconEnabled, 
--    clcrAPIfBeaconIntvl

ciscoLwappCcxRmMIBCompliance OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for the SNMP entities that
--    implement the ciscoLwappCcxRmMIB module.
--  Module
--    >>current<<
--   MandGroup
--    ciscoLwappCcxRmDot11aConfigGroup
--   MandGroup
--    ciscoLwappCcxRmDot11bConfigGroup
--   MandGroup
--    ciscoLwappCcxRmApIfConfigGroup
--   MandGroup
--    ciscoLwappCcxRmBeaconReportGroup
--   MandGroup
--    ciscoLwappCcxRmD11WlanConfigGroup

ciscoLwappCcxRmMIBComplianceVer1 OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the SNMP entities that
--    implement the ciscoLwappCcxRmMIB module.
--  Module
--    >>current<<
--   MandGroup
--    ciscoLwappCcxRmDot11aConfigGroupVer1
--   MandGroup
--    ciscoLwappCcxRmDot11bConfigGroupVer1
--   MandGroup
--    ciscoLwappCcxRmApIfConfigGroupVer1
--   MandGroup
--    ciscoLwappCcxRmBeaconReportGroup
--   MandGroup
--    ciscoLwappCcxRmD11WlanConfigGroup


END