CISCO-ATM-RM-MIB-V1SMI.my

-- MIB file created 25-Mar-2003 15:57:33, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-ATM-RM-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-ATM-RM-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    DisplayString, TruthValue
            FROM SNMPv2-TC-v1
    ifIndex
            FROM RFC1213-MIB
    ciscoExperiment
            FROM CISCO-SMI
    Counter, Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoAtmRmMIB OBJECT IDENTIFIER ::= { ciscoExperiment 10 }
-- MODULE-IDENTITY
--  LastUpdated
--    200206030000Z
--  OrgName
--    Cisco System Inc.
--  ContactInfo
--               Cisco Systems
--                Customer Service
--    
--        Postal: 170 W Tasman Drive
--                San Jose, CA  95134
--                USA
--    
--           Tel: +1 800 553-NETS
--    
--        E-mail: cs-atm@cisco.com
--  Descr
--    The MIB module which complements standard ATM MIBs for
--     Cisco devices, for Resource Management.
--  RevDate
--    200206030000Z
--  RevDescr
--    Added objects to support Per Class Overbooking for 
--     ATM interfaces.
--  RevDate
--    200101290000Z
--  RevDescr
--    Added a table that contains objects to manage ATM 
--     Traffic Shaper configuration and state information
--     for ATM interfaces.
--  RevDate
--    9912220000Z
--  RevDescr
--    Fix the errors in the definition of cgrPerVcqAtmRmGroup.
--  RevDate
--    9907270000Z
--  RevDescr
--    Added object to support overbooking of equivalent bandwidth
--     of an ATM interface.
--  RevDate
--    9904300000Z
--  RevDescr
--     Added objects for the IMA interface support.
--  RevDate
--    9904140000Z
--  RevDescr
--    Added objects to instruct Connection Admission Control to
--     include framing overhead in the calculation of maximum cell
--     rate of an ATM interface.
--  RevDate
--    9903110000Z
--  RevDescr
--    Clarified the description for some of the objects that they
--     are applicable to logical port ATM interfaces too and made
--     appropriate changes to the Compliance section.
--  RevDate
--    9811240000Z
--  RevDescr
--    Added a table to manage global resources on the Catalyst8540MSR
--    platform. This was necessary because the Catalyst8540MSR,
--    has 8 switching modules internally, with each switching
--    module having its own independent cell memory. Each
--    switching module performs per-VC queueing for a specific
--    (fixed in hardware) group of ports, independent of 
--    any other switching module.
--    
--    The Lightstream 1010 had only one global cell memory
--    for the entire device. 
--  RevDate
--    9811030000Z
--  RevDescr
--    Specify a range limiting Link Distance object.
--  RevDate
--    9807260000Z
--  RevDescr
--    Added an object to enable Hierarchical Scheduling.
--  RevDate
--    9712030000Z
--  RevDescr
--    Added object to configure Service Category support on
--     an interface.
--  RevDate
--    9705260000Z
--  RevDescr
--    Added objects for management of new features made possible
--     on the LS1010 by the Feature Card Plus.  This includes 
--     support for per-VC queueing hardware structures,
--     enhanced UPC, non-zero MCR for ABR, and UBR+.
--  RevDate
--    9611110000Z
--  RevDescr
--    Added objects for management of Cell Loss Ratio for
--     CLP0+1 cell-streams. Added table for default tolerance.

ciscoAtmRmMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmRmMIB 1 }
ciscoAtmRmSwitchCfg OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 1 }
ciscoAtmRmSwitchSharedMem OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 2 }
ciscoAtmRmIfCfg OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 3 }
ciscoAtmRmIfState OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 4 }
ciscoAtmRmIfStatistics OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 5 }
ciscoAtmRmIfSharedMem OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 6 }
ciscoLsPerVcqAtmRmSwitch OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 7 }
ciscoLsPerVcqAtmRmIf OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 8 }
ciscoCgrPerVcqAtmRmSwitch OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 9 }
ciscoAtmRmTrafShaperIf OBJECT IDENTIFIER ::= { ciscoAtmRmMIBObjects 10 }
ciscoAtmRmMIBConformance OBJECT IDENTIFIER ::= { ciscoAtmRmMIB 3 }
ciscoAtmRmMIBCompliances OBJECT IDENTIFIER ::= { ciscoAtmRmMIBConformance 1 }
ciscoAtmRmMIBGroups OBJECT IDENTIFIER ::= { ciscoAtmRmMIBConformance 2 }

ForceValue ::= INTEGER {
        forceChange(1),
        noForceChange(2)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This data type is used to provide a standard mechanism
--     for providing protection on writing to objects.
--     An object of type ForceValue is associated with the
--     protected object. If an set request is made for the 
--     protected object, the state of the system or the
--     value to be set may violate the intended protection.
--     The value of the associated object of type ForceValue
--     is then used to determine whether the set request
--     succeeds or fails: 
--        - value is forceChange, request succeeds.
--        - value is noForceChange, request fails.
--     An additional characteristic of the ForceValue type is
--     that the setting of the protected object resets the
--     value of the protection object to noForceChange. 
--       As an example, take an object limiting the number of 
--     network connections on an interface (named maxNetConn). 
--     If maxNetConn is set below the number of currently active 
--     connections, some of those connections will be cleared. 
--     An associated protection object of type ForceValue 
--     (named maxNetConnForce) is used to protect the setting 
--     of maxNetConn. If the setting of maxNetConn would cause
--     the clearing of connections, maxNetConnForce must
--     be set to forceChange. Whenever maxNetConn is successfully
--     set, maxNetConnForce assumes the value noForceChange.

FineQueueThreshold ::= INTEGER {
        percent12(1),
        percent25(2),
        percent37(3),
        percent50(4),
        percent62(5),
        percent75(6),
        percent87(7),
        percent100(8)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This data type is used to represent thresholds for
--     output-queues on a shared memory ATM switch.

LsPerVcqServiceClass ::= INTEGER {
        c1(1),
        c2(2),
        c3(3),
        c4(4),
        c5(5),
        c6(6),
        c7(7),
        c8(8)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This data type is used to represent one of the
--     Service Classes.

LsPerVcqServiceClassNoC1 ::= INTEGER {
        c2(2),
        c3(3),
        c4(4),
        c5(5),
        c6(6),
        c7(7),
        c8(8)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This data type is used to represent one of the
--     Service Classes, omitting c1.

LsPerVcqThresholdGroup ::= INTEGER {
        tg1(1),
        tg2(2),
        tg3(3),
        tg4(4),
        tg5(5),
        tg6(6),
        tg7(7),
        tg8(8),
        tg9(9),
        tg10(10),
        tg11(11),
        tg12(12),
        tg13(13),
        tg14(14),
        tg15(15),
        tg16(16)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This data type is used to represent one of the
--     Threshold Groups.

LsPerVcqThresholdGroupService ::= INTEGER {
        cbr(1),
        vbrRt(2),
        vbrNrt(3),
        abr(4),
        ubr(5)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This data type is used to specify how VC/VP
--     queues are assigned to Threshold Groups.

CgrPerVcqModuleId ::= INTEGER {
        module1(1),
        module2(2),
        module3(3),
        module4(4),
        module5(5),
        module6(6),
        module7(7),
        module8(8)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The Catalyst8540MSR has 8 switching modules. Each
--     module has its own cell memory, and performs 
--     its own congestion control, independent  of
--     the other switching modules.

rmSwitchOverSubFactor OBJECT-TYPE
    SYNTAX INTEGER(1..32)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Over Subscription Factor (OSF) is used on switch startup/OIR
         to determine the maximum sizes of VBR-NRT and ABR/UBR queues.
         In general, the larger the value of OSF specified, the
         larger the queues are made at startup.
         Denoting the maximum sizes of CBR,VBR-RT, VBR-NRT, and ABR/UBR
         output queues for a physical interface as L1, L2, L3, and L4,
         respectively, an example algorithm is:
            L3 = .25 * (OSF*(2048-L1 -L2)
            L4 = .75 * (OSF*(2048-L1 -L2)"
    DEFVAL { 4 }
    ::= { ciscoAtmRmSwitchCfg 1 }

rmSwitchScrMarginFactor OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Sustained Cell Rate Margin Factor (SCRMF) is used in
         Connection Admission Control (CAC) of VBR connections to
         vary the weight given to the difference between Sustained
         Cell Rate (scr) and Peak Cell Rate (pcr) specified in the
         traffic contract. When calculating the equivalent bandwidth
         offered by a connection, SCRMF is used as follows:
            eqBw = scr + ((pcr - scr) * rcacVbrScrmf) / 100"
    DEFVAL { 1 }
    ::= { ciscoAtmRmSwitchCfg 2 }

rmSwitchAbrCongNotify OBJECT-TYPE
    SYNTAX INTEGER {
        relativeRate(1),
        efci(2),
        efciAndRelativeRate(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The ABR Congestion Notification object determines
         the type of congestion notification used on ABR connections
         in the switch. This notification can be done either via
         relative-rate or Explicit Forward Congestion Indication
         marking in ATM cells, or both."
    DEFVAL { relativeRate }
    ::= { ciscoAtmRmSwitchCfg 3 }

rmDefaultQosObjectiveTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RmDefaultQosObjectiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing Resource Management
         configuration information for default Quality of Service
         objective values used when a signalling request is received
         on a UNI interface."
    ::= { ciscoAtmRmSwitchCfg 4 }

rmDefaultQosObjectiveEntry OBJECT-TYPE
    SYNTAX RmDefaultQosObjectiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the
         rmDefaultQosObjectiveTable containing Resource
         Management configuration for the default UNI QOS objectives.
         Rows are identified by Service Category."
    INDEX { rmDefaultQosServiceCategory }
    ::= { rmDefaultQosObjectiveTable 1 }

RmDefaultQosObjectiveEntry ::= SEQUENCE {
    rmDefaultQosServiceCategory INTEGER,
    rmScDefaultQosMaxCtd INTEGER,
    rmScDefaultQosPeakToPeakCdv INTEGER,
    rmScDefaultQosClr INTEGER,
    rmScDefaultQosClrClp01 INTEGER
    }

rmDefaultQosServiceCategory OBJECT-TYPE
    SYNTAX INTEGER {
        cbr(1),
        vbrRt(2),
        vbrNrt(3)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Service Category to which the row applies."
    ::= { rmDefaultQosObjectiveEntry 1 }

rmScDefaultQosMaxCtd OBJECT-TYPE
    SYNTAX INTEGER(0..16777215)
--  Units
--    microseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The default Maximum Cell Transfer Delay (ctd) for the
         Service Category. It applies only to cbr and vbr-rt Service
         Categories. Specifying a value of 16777215 signifies that
         this parameter should not be checked during connection setup.
         The units of this object are microseconds."
    DEFVAL { 16777215 }
    ::= { rmDefaultQosObjectiveEntry 2 }

rmScDefaultQosPeakToPeakCdv OBJECT-TYPE
    SYNTAX INTEGER(0..16777215)
--  Units
--    microseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The default Peak-to-peak cell delay variation (cdv) for
         the Service Category. It applies only to cbr and vbr-rt Service
         Categories. Specifying a value of 16777215 signifies
         that this parameter should not be checked during connection
         setup. The units of this object are microseconds."
    DEFVAL { 16777215 }
    ::= { rmDefaultQosObjectiveEntry 3 }

rmScDefaultQosClr OBJECT-TYPE
    SYNTAX INTEGER(0..15)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The default cell-loss-ratio for the Service Category (for
         CLP=0 cells only). Specifying a value of 0 signifies that
         this parameter should not be checked during connection setup.
         The units of this object are negative powers of ten (so
         an object value of 8 means 10**(-8))."
    DEFVAL { 0 }
    ::= { rmDefaultQosObjectiveEntry 4 }

rmScDefaultQosClrClp01 OBJECT-TYPE
    SYNTAX INTEGER(0..15)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The default cell-loss-ratio for the Service Category for
         CLP=0+1 cells. Specifying a value of 0 signifies that
         this parameter should not be checked during connection setup.
         The units of this object are negative powers of ten (so
         an object value of 8 means 10**(-8))."
    DEFVAL { 0 }
    ::= { rmDefaultQosObjectiveEntry 5 }

sharedMemRmSwitchQueuedCellTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SharedMemRmSwitchQueuedCellEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing Resource Management
         information on the cells in the output queues of a
         shared-memory output-queued ATM switch."
    ::= { ciscoAtmRmSwitchSharedMem 1 }

sharedMemRmSwitchQueuedCellEntry OBJECT-TYPE
    SYNTAX SharedMemRmSwitchQueuedCellEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the
         sharedMemRmSwitchQueuedCellTable containing Resource
         Management information on the cells in the output 
         queues of a shared-memory switch.  Rows are 
         indexed by priority."
    INDEX { sharedMemRmCellPriority }
    ::= { sharedMemRmSwitchQueuedCellTable 1 }

SharedMemRmSwitchQueuedCellEntry ::= SEQUENCE {
    sharedMemRmCellPriority INTEGER,
    sharedMemRmSwitchQueuedCellLimit INTEGER,
    sharedMemRmSwitchQueuedCellCount Gauge
    }

sharedMemRmCellPriority OBJECT-TYPE
    SYNTAX INTEGER {
        p1(1),
        p2(2),
        p3(3),
        p4(4)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The cell priority. The cell priority maps one-to-one to the
         per-interface queues specified by the sharedMemRmIfOutputQ
         object. All cells of a connection of a particular Service 
         Category are given a fixed priority. The Service Categories
         allocated to a priority can be determined by querying the 
         sharedMemRmIfOutputQServCategory object for any physical 
         interface on the switch."
    ::= { sharedMemRmSwitchQueuedCellEntry 1 }

sharedMemRmSwitchQueuedCellLimit OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configured limit on the number of cells on all output queues 
         of the switch at any time of a particular priority."
    DEFVAL { 65535 }
    ::= { sharedMemRmSwitchQueuedCellEntry 2 }

sharedMemRmSwitchQueuedCellCount OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Count of the number of cells on all output queues 
         of the switch at any time of a particular priority."
    ::= { sharedMemRmSwitchQueuedCellEntry 3 }

rmIfCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RmIfCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing Resource Management
         configuration information for whole ATM interfaces."
    ::= { ciscoAtmRmIfCfg 3 }

rmIfCfgEntry OBJECT-TYPE
    SYNTAX RmIfCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the rmIfCfgTable
         containing Resource Management configuration for an ATM
        interface.  The particular interface is identified by the
        value of MIB-II's ifIndex."
    INDEX { ifIndex }
    ::= { rmIfCfgTable 1 }

RmIfCfgEntry ::= SEQUENCE {
    rmIfOutPacingRateRequested Gauge,
    rmIfOutPacingRateInstalled Gauge,
    rmIfOutPacingForce ForceValue,
    rmIfLinkDistance Gauge,
    rmIfBestEffortLimit Gauge,
    rmIfCbrDefaultRxUpcTolerance Gauge,
    rmIfVbrRtDefaultRxUpcTolerance Gauge,
    rmIfVbrNrtDefaultRxUpcTolerance Gauge,
    rmIfAbrDefaultRxUpcTolerance Gauge,
    rmIfUbrDefaultRxUpcTolerance Gauge,
    rmIfVbrRtDefaultRxUpcCdvt Gauge,
    rmIfVbrNrtDefaultRxUpcCdvt Gauge,
    rmIfServCategorySupport INTEGER,
    rmIfFramingOverhead TruthValue,
    rmIfFramingOverheadForce ForceValue,
    rmIfOverBooking INTEGER,
    rmIfVbrRtPerClassOverbooking INTEGER,
    rmIfVbrNrtPerClassOverbooking INTEGER,
    rmIfAbrPerClassOverbooking INTEGER,
    rmIfUbrPerClassOverbooking INTEGER
    }

rmIfOutPacingRateRequested OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    kilobits-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects an explicit configuration of the
         state of pacing for this interface. If the value of this 
         object is 0, pacing is disabled on this interface. 
         Prior to any user configuration, the value of this object 
         is 0. If the value not 0, it represents the output pacing 
         value, in kilobits per second. The hardware is not capable 
         of providing all possible rates. The rate in place is available 
         in rmIfOutPacingRateInstalled. If the value specified would
         reduce the port rate below that currently allocated to 
         Guaranteed Service bandwidth for the output flow, 
         the rmIfOutPacingForce object must be set in conjunction with 
         this object in order to cause the change to take effect."
    DEFVAL { 0 }
    ::= { rmIfCfgEntry 1 }

rmIfOutPacingRateInstalled OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    kilobits-per-second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The output pacing value, in kilobits per second, in effect. 
         A value of 0 indicates output pacing is disabled. 
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { 0 }
    ::= { rmIfCfgEntry 2 }

rmIfOutPacingForce OBJECT-TYPE
    SYNTAX ForceValue
--    Rsyntax INTEGER {
--        forceChange(1),
--        noForceChange(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A Set Request for rmIfOutPacingRateRequested that does not
         reduce the port rate below the currently allocated bandwidth
         guarantees for the output flow always succeeds irrespective
         of the value of rmIfOutPacingForce.  But a Set Request for
         rmIfOutPacingRateRequested that does reduce the port rate
         below the currently allocated bandwidth guarantees for the
         output flow will succeed only if rmIfOutPacingForce object
         is also set to the value forceChange. In either of the above
         cases, once rmIfOutPacingRateRequested object is set to the
         appropriate value, rmIfOutPacingForce object assumes the
         noForceChange value. This object is not instantiated for 
         interfaces to which it cannot be applied."
    DEFVAL { noForceChange }
    ::= { rmIfCfgEntry 3 }

rmIfLinkDistance OBJECT-TYPE
    SYNTAX Gauge(0..65535)
--  Units
--    kilometers
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The link distance defined for the interface, expressed
         in kilometers. This is then divided by the speed of light
         to determine a propagation delay."
    DEFVAL { 0 }
    ::= { rmIfCfgEntry 4 }

rmIfBestEffortLimit OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The limit on the number of Best Effort connections that
         can be established on this interface. Note that a change
         to this value affects subsequent connection setup, not
         existing connections. A value of 4294967295 disables best-effort
         limits."
    DEFVAL { 4294967295 }
    ::= { rmIfCfgEntry 5 }

rmIfCbrDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the GCRA limit parameter used for policing
         of a receive cell-stream of a CBR connection on an interface,
         if the limit parameter is not specified explicitly in the
         connection setup request. It is specified
         in cell-times. Note that a change to this value affects
         subsequent connection setup, not existing connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 6 }

rmIfVbrRtDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum burst size parameter used for policing
         of a receive cell-stream of a VBR-RT connection on an
         interface, if this parameter is not specified
         explicitly in the connection setup request. It is
         specified in cell-times. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 7 }

rmIfVbrNrtDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum burst size parameter used for policing
         of a receive cell-stream of a VBR-NRT connection on an
         interface, if this parameter is not specified
         explicitly in the connection setup request. It is
         specified in cell-times. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 8 }

rmIfAbrDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the GCRA limit parameter used for policing
         of a receive cell-stream of an ABR connection on an interface,
         if the limit parameter is not specified explicitly in the
         connection setup request. It is specified
         in cell-times. Note that a change to this value affects
         subsequent connection setup, not existing connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 9 }

rmIfUbrDefaultRxUpcTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the GCRA limit parameter used for policing
         of a receive cell-stream of a UBR connection on an interface,
         if the limit parameter is not specified explicitly in the
         connection setup request. It is specified
         in cell-times. Note that a change to this value affects
         subsequent connection setup, not existing connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 10 }

rmIfVbrRtDefaultRxUpcCdvt OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the GCRA limit parameter used for peak-rate
         policing of a receive cell-stream of a VBR-RT connection
         on an interface, if the CDVT parameter is not specified
         explicitly in the connection setup request. It is
         specified in cell-times. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 11 }

rmIfVbrNrtDefaultRxUpcCdvt OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the GCRA limit parameter used for peak-rate
         policing of a receive cell-stream of a VBR-NRT connection
         on an interface, if the CDVT parameter is not specified
         explicitly in the connection setup request. It is
         specified in cell-times. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 1024 }
    ::= { rmIfCfgEntry 12 }

rmIfServCategorySupport OBJECT-TYPE
    SYNTAX INTEGER(0..31)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of this object controls and reflects the
         Service Category(s) supported on this ATM interface.
        
         If a bit is set, the corresponding Service Category
         is supported on the interface, and CAC will allow
         such connections. If a bit is reset, the corresponding
         Service Category is not supported on the interface,
         and CAC will reject such connections.
        
         Write access may not be supported on all interfaces. 
         Not all Service Categories may be supported on
         an interface. For example, mixing of Service
         Categories may not be allowed on a VP tunnel
         interface. 
        
             The various bit positions are:
              1    constant bit rate (cbr)
              2    variable bit rate-real time (vbr-rt)
              4    variable bit rate-non real time (vbr-nrt)
              8    available bit rate (abr)
             16    unspecified bit rate (ubr)"
    ::= { rmIfCfgEntry 13 }

rmIfFramingOverhead OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "If this object is set to true, framing overhead will be taken
         into account in determining the Maximum Cell Rate that is
         possible on this interface. If this object is set to false,
         framing overhead will not figure in the determination of the
         Maximum Cell Rate that is possible on this interface. If
         setting the value of this object to true results in reducing
         the Maximum Guaranteed Services Bandwidth of this interface 
         below the currently allocated bandwidth guarantees on this 
         interface, the object rmIfFramingOverheadForce must also be 
         set in order to cause the change to take effect. This object is
         not instantiated for interfaces to which it cannot be applied."
    DEFVAL { false }
    ::= { rmIfCfgEntry 14 }

rmIfFramingOverheadForce OBJECT-TYPE
    SYNTAX ForceValue
--    Rsyntax INTEGER {
--        forceChange(1),
--        noForceChange(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A Set Request for rmIfFramingOverhead that does not reduce
         the Maximum Guaranteed Services Bandwidth of this interface
         below the currently allocated bandwidth guarantees always
         succeeds irrespective of the value of rmIfFramingOverheadForce.
         But a Set Request for rmIfFramingOverhead that does reduce the
         Maximum Guaranteed Services Bandwidth of this interface below
         the currently allocated bandwidth guarantees will succeed only
         if rmIfFramingOverheadForce object is also set to the value
         forceChange.  In either of the above cases, once the
         rmIfFramingOverhead object is set to the appropriate value,
         rmIfFramingOverheadForce object assumes the noForceChange 
         value.  This object is not instantiated for interfaces to
         which it cannot be applied."
    DEFVAL { noForceChange }
    ::= { rmIfCfgEntry 15 }

rmIfOverBooking OBJECT-TYPE
    SYNTAX INTEGER(100..1000)
--  Units
--    percent
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies overbooking on this interface as
         a percentage of the Maximum Cell Rate that is possible
         on this interface. If the value of this object is 100,
         overbooking is disabled on this interface. A set request
         for this object will succeed only if the value of the
         ifAdminStatus object for this interface is 'down'. 
         This object is not instantiated for interfaces to which 
         it cannot be applied."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 16 }

rmIfVbrRtPerClassOverbooking OBJECT-TYPE
    SYNTAX INTEGER(100..3200)
--  Units
--    percent
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Per Class Overbooking 
         percentage for VBR-rt service category on this 
         interface. If the value of this object is 100, 
         Per Class Overbooking for VBR-rt is disabled on this 
         interface. Specifying a value that is greater than 100 
         causes the CAC to scale down the bandwidth allocated to
         a VBR-rt VC on this interface by a factor that is equal 
         to the inverse of the overbooking percentage specified by 
         this object. A set request for this object will succeed 
         only if the value of the ifAdminStatus object for this 
         interface is 'down' and Interface overbooking 
         (rmIfOverBooking object) is disabled. A set request for 
         this object will not succeed if it specifies a value
         that would cause the current bandwidth guarantees on 
         this interface to exceed the maximum bandwidth available 
         for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 17 }

rmIfVbrNrtPerClassOverbooking OBJECT-TYPE
    SYNTAX INTEGER(100..3200)
--  Units
--    percent
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Per Class Overbooking
         percentage for VBR-Nrt service category on this
         interface. If the value of this object is 100,
         Per Class Overbooking for VBR-Nrt is disabled on this
         interface. Specifying a value that is greater than 100
         causes the CAC to scale down the bandwidth allocated to
         a VBR-Nrt VC on this interface by a factor that is equal
         to the inverse of the overbooking percentage specified by
         this object. A set request for this object will succeed
         only if the value of the ifAdminStatus object for this
         interface is 'down' and Interface overbooking
         (rmIfOverBooking object) is disabled. A set request for
         this object will not succeed if it specifies a value
         that would cause the current bandwidth guarantees on
         this interface to exceed the maximum bandwidth available
         for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 18 }

rmIfAbrPerClassOverbooking OBJECT-TYPE
    SYNTAX INTEGER(100..3200)
--  Units
--    percent
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Per Class Overbooking
         percentage for ABR service category on this
         interface. If the value of this object is 100,
         Per Class Overbooking for ABR is disabled on this
         interface. Specifying a value that is greater than 100
         causes the CAC to scale down the bandwidth allocated to
         a ABR VC on this interface by a factor that is equal
         to the inverse of the overbooking percentage specified by
         this object. A set request for this object will succeed
         only if the value of the ifAdminStatus object for this
         interface is 'down' and Interface overbooking
         (rmIfOverBooking object) is disabled. A set request for
         this object will not succeed if it specifies a value
         that would cause the current bandwidth guarantees on
         this interface to exceed the maximum bandwidth available
         for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 19 }

rmIfUbrPerClassOverbooking OBJECT-TYPE
    SYNTAX INTEGER(100..3200)
--  Units
--    percent
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Per Class Overbooking
         percentage for UBR service category on this
         interface. If the value of this object is 100,
         Per Class Overbooking for UBR is disabled on this
         interface. Specifying a value that is greater than 100
         causes the CAC to scale down the bandwidth allocated to
         a UBR VC on this interface by a factor that is equal
         to the inverse of the overbooking percentage specified by
         this object. A set request for this object will succeed
         only if the value of the ifAdminStatus object for this
         interface is 'down' and Interface overbooking
         (rmIfOverBooking object) is disabled. A set request for
         this object will not succeed if it specifies a value
         that would cause the current bandwidth guarantees on
         this interface to exceed the maximum bandwidth available
         for guaranteed services on this interface."
    DEFVAL { 100 }
    ::= { rmIfCfgEntry 20 }

rmIfDirectionCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RmIfDirectionCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing Resource Management
         configuration information for a single direction of
         traffic flow on ATM interfaces."
    ::= { ciscoAtmRmIfCfg 4 }

rmIfDirectionCfgEntry OBJECT-TYPE
    SYNTAX RmIfDirectionCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the rmIfInOutCfgTable
         containing Resource Management configuration for a
         traffic direction on an ATM interface.  The particular
         interface is identified by the value of MIB-II's ifIndex,
         and the direction of flow."
    INDEX { ifIndex, rmIfDirection }
    ::= { rmIfDirectionCfgTable 1 }

RmIfDirectionCfgEntry ::= SEQUENCE {
    rmIfDirection INTEGER,
    rmIfDirControlLinkShareMaxAgg INTEGER,
    rmIfDirControlLinkShareMinCbr INTEGER,
    rmIfDirControlLinkShareMaxCbr INTEGER,
    rmIfDirControlLinkShareMinVbr INTEGER,
    rmIfDirControlLinkShareMaxVbr INTEGER,
    rmIfDirMaxCbrPcr Gauge,
    rmIfDirMaxCbrTolerance Gauge,
    rmIfDirMaxVbrPcr Gauge,
    rmIfDirMaxVbrScr Gauge,
    rmIfDirMaxVbrTolerance Gauge,
    rmIfDirMaxAbrPcr Gauge,
    rmIfDirMaxAbrTolerance Gauge,
    rmIfDirMaxUbrPcr Gauge,
    rmIfDirMaxUbrTolerance Gauge,
    rmIfDirMaxAbrMcr Gauge,
    rmIfDirMaxUbrMcr Gauge,
    rmIfDirMaxVbrCdvt Gauge,
    rmIfDirControlLinkShareMinAbr INTEGER,
    rmIfDirControlLinkShareMaxAbr INTEGER,
    rmIfDirControlLinkShareMinUbr INTEGER,
    rmIfDirControlLinkShareMaxUbr INTEGER
    }

rmIfDirection OBJECT-TYPE
    SYNTAX INTEGER {
        receive(1),
        transmit(2)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Selects the traffic direction for which subsequent row
         parameters are read or written. In is received from
         the port(into the device), Out is transmitted to the
         port (from the device)."
    ::= { rmIfDirectionCfgEntry 1 }

rmIfDirControlLinkShareMaxAgg OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies the maximum aggregate Guaranteed Service
         (CBR or VBR) traffic that can be allocated in a
         traffic direction on an interface. It is expressed
         as a percentage of the maximum traffic direction's
         bandwidth (applies after output pacing, for example).
         This object interacts with MaxVbr (if specified) such
         that MaxVbr <= MaxAgg. 
         This object interacts with MaxCbr (if specified) such
         that MaxCbr <= MaxAgg. 
         This object interacts with MaxAbr (if specified) such
         that MaxAbr <= MaxAgg.
         This object interacts with MaxUbr (if specified) such
         that MaxUbr <= MaxAgg.
         Note that a change to this value affects subsequent
         connection setup, not existing connections.
         If the object is set to -1, the object is considered
         to be unspecified.
         This object is not instantiated for interfaces to which it
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 2 }

rmIfDirControlLinkShareMinCbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies a minimum amount of CBR traffic that can
         be reserved in a traffic direction on an interface.
         It is expressed as a percentage of the maximum traffic
         direction's bandwidth (applies after output pacing,
         for example).
         This object interacts with MinVbr, MinAbr, MinUbr
         (if specified) such that
          MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
         This object interacts with MaxCbr (if specified) such that
         MinCbr < MaxCbr.
         Note that a change to this value affects subsequent
         connection setup, not existing connections. If the object
         is set to -1, the object is considered to be unspecified.
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 3 }

rmIfDirControlLinkShareMaxCbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies the maximum CBR traffic that can be allocated
         in a traffic direction on an interface. It is expressed
         as a percentage of the maximum traffic direction's
         bandwidth (applies after output pacing, for example).
         This object interacts with MinCbr (if specified) such that
         MinCbr <= MaxCbr.
         This object interacts with MaxAgg (if specified) such
         that MaxCbr <= MaxAgg.
         Note that a change to this value affects subsequent
         connection setup, not existing connections. This object is
         not instantiated for interfaces to which it cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 4 }

rmIfDirControlLinkShareMinVbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies a minimum amount of VBR traffic that can
         be reserved in a traffic direction on an interface.
         It is expressed as a percentage of the maximum traffic
         direction's bandwidth (applies after output pacing,
         for example).
         This object interacts with MinCbr, MinAbr, and MinUbr
         (if specified), such that
          MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
         This object interacts with MaxVbr (if specified) such that
         MinVbr <= MaxVbr.
         Note that a change to this value affects subsequent 
         connection setup, not existing connections. If the object 
         is set to -1, the object is considered to be unspecified.
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 5 }

rmIfDirControlLinkShareMaxVbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies the maximum VBR traffic that can be allocated
         in a traffic direction on an interface. It is expressed
         as a percentage of the maximum traffic direction's
         bandwidth (applies after output pacing, for example).
         This object interacts with MinVbr (if specified) such that
         MinVbr <= MaxVbr.
         This object interacts with MaxAgg (if specified) such
         that MaxVbr <= MaxAgg.
         Note that a change to this value affects subsequent
         connection setup, not existing connections.
         If the object is set to -1, the object is considered
         to be unspecified.
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 6 }

rmIfDirMaxCbrPcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum Peak-cell-rate (pcr) traffic
         parameter that can be specified for CBR connections
         in a traffic direction on an interface. It is specified
         in cells-per-second. A value of 4294967295 disables checking
         of this parameter limit. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 7 }

rmIfDirMaxCbrTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum limit parameter used in the GCRA
         algorithm for traffic policing that can be specified
         for CBR connections in a traffic direction on an interface.
         It is specified in cell-times.  A value of 4294967295 disables 
         checking of this parameter limit. Note that a change to this
         value affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 8 }

rmIfDirMaxVbrPcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum Peak-cell-rate (pcr) traffic
         parameter that can be specified for VBR connections
         in a traffic direction on an interface. It is specified
         in cells-per-second.  A value of 4294967295 disables checking
         of this parameter limit. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 9 }

rmIfDirMaxVbrScr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum Sustained-cell-rate (scr) traffic
         parameter that can be specified for VBR connections
         in a traffic direction on an interface. It is specified
         in cells-per-second.  A value of 4294967295 disables checking
         of this parameter limit. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 10 }

rmIfDirMaxVbrTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum limit parameter used in the GCRA
         algorithm for traffic policing that can be specified
         for VBR connections in a traffic direction on an interface.
         It is specified in cell-times.  A value of 4294967295 disables 
         checking of this parameter limit. Note that a change to this
         value affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 11 }

rmIfDirMaxAbrPcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum Peak-cell-rate (pcr) traffic
         parameter that can be specified for ABR connections
         in a traffic direction on an interface. It is specified
         in cells-per-second.  A value of 4294967295 disables checking
         of this parameter limit. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 12 }

rmIfDirMaxAbrTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum limit parameter used in the GCRA
         algorithm for traffic policing that can be specified
         for ABR connections in a traffic direction on an interface.
         It is specified in cell-times.  A value of 4294967295 disables 
         checking of this parameter limit. Note that a change to this
         value affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 13 }

rmIfDirMaxUbrPcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum Peak-cell-rate (pcr) traffic
         parameter that can be specified for UBR connections
         in a traffic direction on an interface. It is specified
         in cells-per-second.  A value of 4294967295 disables checking
         of this parameter limit. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 14 }

rmIfDirMaxUbrTolerance OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum limit parameter used in the GCRA
         algorithm for traffic policing that can be specified
         for UBR connections in a traffic direction on an interface.
         It is specified in cell-times.  A value of 4294967295 disables 
         checking of this parameter limit. Note that a change to this
         value affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 15 }

rmIfDirMaxAbrMcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum Minimum-cell-rate (mcr) traffic
         parameter that can be specified for ABR connections
         in a traffic direction on an interface. It is specified
         in cells-per-second.  A value of 4294967295 disables checking
         of this parameter limit. Note that a change to this value
         affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 16 }

rmIfDirMaxUbrMcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum Minimum-cell-rate (mcr) traffic
         parameter that can be specified for UBR plus (UBR with
         an mcr guaranteed) connections in a traffic direction on
         an interface. It is specified in cells-per-second.  A
         value of 4294967295 disables checking of this parameter
         limit. Note that a change to this value affects subsequent
         connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 17 }

rmIfDirMaxVbrCdvt OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cell-times
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Specifies the maximum peak-rate CDVT parameter used in
         the GCRA algorithm for traffic policing that can be specified
         for VBR connections in a traffic direction on an interface.
         It is specified in cell-times.  A value of 4294967295 disables
         checking of this parameter limit. Note that a change to this
         value affects subsequent connection setup, not existing
         connections."
    DEFVAL { 4294967295 }
    ::= { rmIfDirectionCfgEntry 18 }

rmIfDirControlLinkShareMinAbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies a minimum amount of ABR traffic that can
         be reserved in a traffic direction on an interface.
         It is expressed as a percentage of the maximum traffic
         direction's bandwidth (applies after output pacing,
         for example).
         This object interacts with MinVbr, MinCbr, and MinUbr
         (if specified) such that:
           MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
         This object interacts with MaxAbr (if specified) such that
         MinAbr < MaxAbr.
         Note that a change to this value affects subsequent
         connection setup, not existing connections. If the object
         is set to -1, the object is considered to be unspecified.
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 19 }

rmIfDirControlLinkShareMaxAbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies the maximum ABR traffic that can be allocated
         in a traffic direction on an interface. It is expressed
         as a percentage of the maximum traffic direction's
         bandwidth (applies after output pacing, for example).
         This object interacts with MinAbr (if specified) such that
           MinAbr <= MaxAbr.
         This object interacts with MaxAgg (if specified) such
         that MaxAbr <= MaxAgg.
         Note that a change to this value affects subsequent
         connection setup, not existing connections.
         If the object is set to -1, the object is considered
         to be unspecified.
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 20 }

rmIfDirControlLinkShareMinUbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies a minimum amount of UBR plus (UBR with
         an mcr guaranteed) traffic that can be reserved in a
         traffic direction on an interface.  It is expressed as
         a percentage of the maximum traffic direction's bandwidth
         (applies after output pacing, for example).
         This object interacts with MinVbr, MinCbr, and
         MinAbr (if specified)
         such that:
           MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
         This object interacts with MaxUbr (if specified) such that
         MinUbr < MaxUbr.
         Note that a change to this value affects subsequent
         connection setup, not existing connections. If the object
         is set to -1, the object is considered to be unspecified.
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 21 }

rmIfDirControlLinkShareMaxUbr OBJECT-TYPE
    SYNTAX INTEGER(-1..95)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configuration in the Controller Link Sharing (CLS) scheme.
         Specifies the maximum UBR plus traffic that can be allocated
         in a traffic direction on an interface. It is expressed
         as a percentage of the maximum traffic direction's
         bandwidth (applies after output pacing, for example).
         This object interacts with MinUbr (if specified) such that
           MinUbr <= MaxUbr.
         This object interacts with MaxAgg (if specified) such
         that MaxUbr <= MaxAgg.
         Note that a change to this value affects subsequent
         connection setup, not existing connections.
         If the object is set to -1, the object is considered
         to be unspecified.
         This object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { -1 }
    ::= { rmIfDirectionCfgEntry 22 }

rmIfServiceCategoryStateTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RmIfServiceCategoryStateEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing Resource Management
         state information for ATM interfaces by Service Category."
    ::= { ciscoAtmRmIfState 1 }

rmIfServiceCategoryStateEntry OBJECT-TYPE
    SYNTAX RmIfServiceCategoryStateEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the
         rmIfServiceCategoryStateTable containing Resource
         Management configuration for an ATM interface. Rows
         are identified by the value of MIB-II's ifIndex, and
         the Service Category."
    INDEX { ifIndex, rmIfSc }
    ::= { rmIfServiceCategoryStateTable 1 }

RmIfServiceCategoryStateEntry ::= SEQUENCE {
    rmIfSc INTEGER,
    rmIfScRxAcr Gauge,
    rmIfScTxAcr Gauge,
    rmIfScRxAlcr Gauge,
    rmIfScTxAlcr Gauge,
    rmIfScNumSvxConns Gauge,
    rmIfScNumPvxConns Gauge,
    rmIfScTxMaxCtd Gauge,
    rmIfScTxP2PeakCdv Gauge,
    rmIfScTxClr Gauge,
    rmIfScTxClrClp01 Gauge,
    rmIfScRxDynBwSvcAcr Gauge,
    rmIfScTxDynBwSvcAcr Gauge
    }

rmIfSc OBJECT-TYPE
    SYNTAX INTEGER {
        cbr(1),
        vbrRt(2),
        vbrNrt(3),
        abr(4),
        ubr(5)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Service Category to which the row applies."
    ::= { rmIfServiceCategoryStateEntry 1 }

rmIfScRxAcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Available Cell Rate (specified in cells per second) for
         traffic received on the interface for this Service Category.
         This is the bandwidth available for connections. For
         CBR and VBR Service Categories, this value decreases as a
         result of connection setup and increases as a result of
         connection release. For ABR and UBR Service Categories,
         this value changes as a result of connection setup
         and teardown only if non-zero mcr is specified.."
    ::= { rmIfServiceCategoryStateEntry 2 }

rmIfScTxAcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Available Cell Rate (specified in cells per second) for
         traffic sent out the interface for this Service Category.
         This is the bandwidth available for connections. For
         CBR and VBR Service Categories, this value decreases as a
         result of connection setup and increases as a result of
         connection release. For ABR and UBR Service Categories,
         this value changes as a result of connection setup
         and teardown only if non-zero mcr is specified."
    ::= { rmIfServiceCategoryStateEntry 3 }

rmIfScRxAlcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Allocated Cell Rate (specified in cells per second) for
         traffic received on the interface for this Service Category.
         This is the bandwidth allocated-to connections. For
         CBR and VBR Service Categories, this value increases as a
         result of connection setup and decreases as a result of
         connection release. For ABR and UBR Service Categories,
         this value changes as a result of connection setup
         and teardown only if non-zero mcr is specified."
    ::= { rmIfServiceCategoryStateEntry 4 }

rmIfScTxAlcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Allocated Cell Rate (specified in cells per second) for
         traffic sent out the interface for this Service Category.
         This is the bandwidth allocated-to connections. For
         Guaranteed Service Categories, this value increases as a
         result of connection setup and decreases as a result of
         connection release. For ABR and UBR Service Categories,
         this value changes as a result of connection setup
         and teardown only if non-zero mcr is specified."
    ::= { rmIfServiceCategoryStateEntry 5 }

rmIfScNumSvxConns OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    number of connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of signalled connections (VC or VP) of this
         Service Category currently allocated on the interface."
    ::= { rmIfServiceCategoryStateEntry 6 }

rmIfScNumPvxConns OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    number of connections
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of permanent connections (VC or VP) of this
         Service Category currently allocated on the interface."
    ::= { rmIfServiceCategoryStateEntry 7 }

rmIfScTxMaxCtd OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    microseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum Cell Transfer Delay estimated to be experienced by
         cells of connections transmitted out this interface of this
         Service Category.  This is estimate does not distinguish between
         clp0 and clp1 cells.  This object is valid for Service Category 
         cbr and vbr-rt. For other Service Categories, the object is not 
         defined."
    ::= { rmIfServiceCategoryStateEntry 8 }

rmIfScTxP2PeakCdv OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    microseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Peak-to-Peak Cell Delay Variation estimated to be experienced
         by cells of connections transmitted out this interface of this
         Service Category.  This estimate does not distinguish between 
         clp0 and clp1 cells.  This object is valid for Service Categories 
         cbr and  vbr-rt. For other Service Categories, the object is not 
         defined."
    ::= { rmIfServiceCategoryStateEntry 9 }

rmIfScTxClr OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Cell Loss Ratio estimated to be experienced by cells
         of connections transmitted out this interface of this Service
         Category.  This is an estimate for clp0 cells only.  The unit of 
         this object is negative power of ten (so an object value of 8 
         means 10**(-8)). This object is valid for Service Categories cbr, 
         vbr-rt, and vbr-nrt. For other Service Categories, the object is 
         not defined."
    ::= { rmIfServiceCategoryStateEntry 10 }

rmIfScTxClrClp01 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Cell Loss Ratio estimated to be experienced by cells
         of connections transmitted out this interface of this Service
         Category.  This is an estimate for clp0+1 cells.  The unit of 
         this object is negative power of ten (so an object value of 8 
         means 10**(-8)). This object is valid for Service Categories cbr, 
         vbr-rt, and vbr-nrt. For other Service Categories, the object is 
         not defined."
    ::= { rmIfServiceCategoryStateEntry 11 }

rmIfScRxDynBwSvcAcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Available Cell Rate (specified in cells per second) for traffic
         received on the interface for this Service Category.  This object 
         is valid only for IMA physical interfaces.  This is the bandwidth 
         available for SVC connections.  For CBR and VBR Service Categories,
         this value decreases as a result of connection setup and increases 
         as a result of connection release.  For ABR and UBR Service 
         Categories, this value changes as a result of connection setup and 
         teardown only if non-zero mcr is specified"
    ::= { rmIfServiceCategoryStateEntry 12 }

rmIfScTxDynBwSvcAcr OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells-per-second
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Available Cell Rate (specified in cells per second) for traffic
         transmitted on the interface for this Service Category.  This 
         object is valid only for IMA physical interfaces.  This is the 
         bandwidth available for SVC connections on physical interfaces.  
         For CBR and VBR Service Categories, this value decreases as a 
         result of connection setup and increases as a result of connection 
         release.  For ABR and UBR Service Categories, this value changes as
         a result of connection setup and teardown only if non-zero mcr is 
         specified"
    ::= { rmIfServiceCategoryStateEntry 13 }

rmIfServiceCategoryStatisticsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RmIfServiceCategoryStatisticsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing Resource Management
         statistics information for ATM interfaces by Service Category."
    ::= { ciscoAtmRmIfStatistics 1 }

rmIfServiceCategoryStatisticsEntry OBJECT-TYPE
    SYNTAX RmIfServiceCategoryStatisticsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the
         rmIfServiceCategoryStatisticsTable containing Resource
         Management configuration for an ATM interface. Rows
         are identified by the value of MIB-II's ifIndex, and
         the Service Category."
    INDEX { ifIndex, rmIfSc }
    ::= { rmIfServiceCategoryStatisticsTable 1 }

RmIfServiceCategoryStatisticsEntry ::= SEQUENCE {
    rmIfScRcacResultNumAdmit Counter,
    rmIfScRcacResultNumTotalRequests Counter,
    rmIfScRcacResultNumFailTraffComb Counter,
    rmIfScRcacResultNumFailBw Counter,
    rmIfScRcacResultNumFailLoss Counter,
    rmIfScRcacResultNumFailDelay Counter,
    rmIfScRcacResultNumFailCdv Counter,
    rmIfScRcacResultNumFailBeLimit Counter,
    rmIfScRcacResultNumFailParmLimit Counter,
    rmIfScRcacResultNumFailOther Counter
    }

rmIfScRcacResultNumAdmit OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of successful resource allocation requests for this
         interface."
    ::= { rmIfServiceCategoryStatisticsEntry 1 }

rmIfScRcacResultNumTotalRequests OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of resource allocation requests for this
         interface."
    ::= { rmIfServiceCategoryStatisticsEntry 2 }

rmIfScRcacResultNumFailTraffComb OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error due to an unsupported combination of traffic
         parameters. An example of this would be, for a VBR connection,
         a zero maximum burst-size given a non-zero sustainable-cell-rate."
    ::= { rmIfServiceCategoryStatisticsEntry 3 }

rmIfScRcacResultNumFailBw OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error due to a lack of bandwidth. This will never
         occur for Best Effort Service Categories."
    ::= { rmIfServiceCategoryStatisticsEntry 4 }

rmIfScRcacResultNumFailLoss OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error due to exceeding cell loss criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 5 }

rmIfScRcacResultNumFailDelay OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error due to exceeding maximum delay criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 6 }

rmIfScRcacResultNumFailCdv OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error due to exceeding cell delay variation criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 7 }

rmIfScRcacResultNumFailBeLimit OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error due to exceeding a limit on the number of
         Best-Effort connections."
    ::= { rmIfServiceCategoryStatisticsEntry 8 }

rmIfScRcacResultNumFailParmLimit OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error due to exceeding a traffic parameter limit 
         criterion."
    ::= { rmIfServiceCategoryStatisticsEntry 9 }

rmIfScRcacResultNumFailOther OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of resource allocation requests which are considered
         to be in error for a reason not enumerated by other counter
         objects."
    ::= { rmIfServiceCategoryStatisticsEntry 10 }

sharedMemRmIfOutputQCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SharedMemRmIfOutputQCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing configuration information
         for ATM physical interface output queues. This table is not 
         instantiated for interfaces to which it cannot be applied."
    ::= { ciscoAtmRmIfSharedMem 1 }

sharedMemRmIfOutputQCfgEntry OBJECT-TYPE
    SYNTAX SharedMemRmIfOutputQCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the sharedMemRmIfOutputQCfgTable
         containing Resource Management configuration for an ATM
         interface.  A particular row is identified by the
         value of MIB-II's ifIndex, and the output queue."
    INDEX { ifIndex, sharedMemRmIfOutputQ }
    ::= { sharedMemRmIfOutputQCfgTable 1 }

SharedMemRmIfOutputQCfgEntry ::= SEQUENCE {
    sharedMemRmIfOutputQ INTEGER,
    sharedMemRmIfOutputQServCategory INTEGER,
    sharedMemRmIfOutputQRequestedMaxSize INTEGER,
    sharedMemRmIfOutputQInstalledMaxSize INTEGER,
    sharedMemRmIfOutputQMaxSizeForce ForceValue,
    sharedMemRmIfOutputQCellCount Gauge
    }

sharedMemRmIfOutputQ OBJECT-TYPE
    SYNTAX INTEGER {
        q1(1),
        q2(2),
        q3(3),
        q4(4)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The output queue on this ATM interface."
    ::= { sharedMemRmIfOutputQCfgEntry 1 }

sharedMemRmIfOutputQServCategory OBJECT-TYPE
    SYNTAX INTEGER(1..31)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The service category(s) sharing this output queue on
         this ATM interface.
             The various bit positions are:
              1    constant bit rate (cbr)
              2    variable bit rate-real time (vbr-rt)
              4    variable bit rate-non real time (vbr-nrt)
              8    available bit rate (abr)
             16    unspecified bit rate (ubr)"
    ::= { sharedMemRmIfOutputQCfgEntry 2 }

sharedMemRmIfOutputQRequestedMaxSize OBJECT-TYPE
    SYNTAX INTEGER(0..65504)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects an explicit configuration of the 
         maximum number of cells that may occupy this queue. 
         If the value of this object is 0, the maximum size in effect
         is a default value calculated by software.
         Prior to any user configuration, the value of this object 
         is 0. The actual maximum size is reflected in the object
         sharedMemRmIfOutputQInstalledMaxSize (and is a default value 
         calculated by software).  Setting this value to 0 causes the 
         size to assume it's default value. When changing a port that 
         is up, must be set in conjunction with the force object
         (sharedMemRmIfOutputQMaxSizeForce) to take effect."
    DEFVAL { 0 }
    ::= { sharedMemRmIfOutputQCfgEntry 3 }

sharedMemRmIfOutputQInstalledMaxSize OBJECT-TYPE
    SYNTAX INTEGER(32..65504)
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of cells that may occupy this queue.
         Will be a multiple of 32. Explicit configuration of maximum
         size are made via the object sharedMemrmIfOutputQRequestedMaxSize.
         Such requests are rounded up to the nearest multiple of 32
         prior to installation."
    ::= { sharedMemRmIfOutputQCfgEntry 4 }

sharedMemRmIfOutputQMaxSizeForce OBJECT-TYPE
    SYNTAX ForceValue
--    Rsyntax INTEGER {
--        forceChange(1),
--        noForceChange(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Must be set to forceChange to allow changing of
         sharedMemRmIfOutputQRequestedMaxSize for a queue on an 
         interface that is 'up'. This is because such a change 
         causes the interface to lose data while the size is 
         changed. Once the change takes place, the force object 
         assumes the noForceChange value."
    DEFVAL { noForceChange }
    ::= { sharedMemRmIfOutputQCfgEntry 5 }

sharedMemRmIfOutputQCellCount OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Count of the number of cells in the output queue."
    ::= { sharedMemRmIfOutputQCfgEntry 6 }

sharedMemRmIfThresholdCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SharedMemRmIfThresholdCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing the output queue thresholds
        used on ATM physical interface output queues. These are specified
        per Service Category. This table is not instantiated for interfaces
        to which it cannot be applied."
    ::= { ciscoAtmRmIfSharedMem 2 }

sharedMemRmIfThresholdCfgEntry OBJECT-TYPE
    SYNTAX SharedMemRmIfThresholdCfgEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the sharedMemRmIfThresholdCfgTable
        containing Resource Management configuration for an ATM
        interface.  A particular row is identified by the
        value of MIB-II's ifIndex, and the Service Category."
    INDEX { ifIndex, rmIfSc }
    ::= { sharedMemRmIfThresholdCfgTable 1 }

SharedMemRmIfThresholdCfgEntry ::= SEQUENCE {
    sharedMemRmIfDiscardThreshold FineQueueThreshold,
    sharedMemRmIfEfciThreshold INTEGER,
    sharedMemRmIfAbrRelativeRateThreshold FineQueueThreshold
    }

sharedMemRmIfDiscardThreshold OBJECT-TYPE
    SYNTAX FineQueueThreshold
--    Rsyntax INTEGER {
--        percent12(1),
--        percent25(2),
--        percent37(3),
--        percent50(4),
--        percent62(5),
--        percent75(6),
--        percent87(7),
--        percent100(8)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The output queue CLP/EPD threshold for this Service 
         Category on this ATM interface. This is expressed in 
         percent-of-full. Note that 100% full effectively turns 
         off the threshold."
    DEFVAL { percent50 }
    ::= { sharedMemRmIfThresholdCfgEntry 1 }

sharedMemRmIfEfciThreshold OBJECT-TYPE
    SYNTAX INTEGER {
        percent12(1),
        percent25(2),
        percent50(3),
        percent100(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The output queue EFCI marking threshold for this Service 
          Category on this ATM interface. This is expressed in 
          percent-of-full. Note that 100% full effectively turns off
          the threshold."
    DEFVAL { percent25 }
    ::= { sharedMemRmIfThresholdCfgEntry 2 }

sharedMemRmIfAbrRelativeRateThreshold OBJECT-TYPE
    SYNTAX FineQueueThreshold
--    Rsyntax INTEGER {
--        percent12(1),
--        percent25(2),
--        percent37(3),
--        percent50(4),
--        percent62(5),
--        percent75(6),
--        percent87(7),
--        percent100(8)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The ABR Relative-rate marking queue congestion threshold 
         for the ABR queue on this ATM interface. This is expressed in
         percent-of-full. Note that 100% full effectively turns off
         the threshold. This object is only defined for the abr
         service category."
    DEFVAL { percent25 }
    ::= { sharedMemRmIfThresholdCfgEntry 3 }

lsPerVcqRmThreshGrpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LsPerVcqRmThreshGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing information
         for Switch Threshold Groups. When cells are
         queued in the switch for a direction of cell
         traffic on an ATM connection (VC or VP), several
         functions related to queueing are dictated
         by the congestion state (fullness) of the Threshold
         Group. Each connection queue is a member of
         a Threshold Group.
         These functions include:
         - The limit on the number of cells that can
           be queued. Cells exceeding this limit are
           discarded.
         - The discard threshold, used for CLP/EPD
           discard when the fullness of the queue exceeds
           the threshold.
         - The marking threshold, used for EFCI
           and ABR-RR marking.
         Each Threshold Group has a maximum number of cells
         that can be resident in it at any one time. The
         number of cells in a Group consists of the number
         of cells in all the queues that are a member of
         the Group. As the number of cells in a Group
         approaches the maximum number for the Group,
         the queue limits may be decreased. This limits
         the share of  buffering available to each
         connection as cell-memory is used."
    ::= { ciscoLsPerVcqAtmRmSwitch 1 }

lsPerVcqRmThreshGrpEntry OBJECT-TYPE
    SYNTAX LsPerVcqRmThreshGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the lsPerVcqRmThreshGrpTable
         containing Resource Management configuration for a
         Threshold Group. All entries ever in the table are 
         present at startup, none are created dynamically."
    INDEX { lsPerVcqRmThreshGrp }
    ::= { lsPerVcqRmThreshGrpTable 1 }

LsPerVcqRmThreshGrpEntry ::= SEQUENCE {
    lsPerVcqRmThreshGrp LsPerVcqThresholdGroup,
    lsPerVcqRmThreshGrpMaxSize INTEGER,
    lsPerVcqRmThreshGrpQMaxSize INTEGER,
    lsPerVcqRmThreshGrpQMinSize INTEGER,
    lsPerVcqRmThreshGrpDiscThreshold INTEGER,
    lsPerVcqRmThreshGrpMarkThreshold INTEGER,
    lsPerVcqRmThreshGrpName DisplayString,
    lsPerVcqRmThreshGrpCellCount Gauge
    }

lsPerVcqRmThreshGrp OBJECT-TYPE
    SYNTAX LsPerVcqThresholdGroup
--    Rsyntax INTEGER {
--        tg1(1),
--        tg2(2),
--        tg3(3),
--        tg4(4),
--        tg5(5),
--        tg6(6),
--        tg7(7),
--        tg8(8),
--        tg9(9),
--        tg10(10),
--        tg11(11),
--        tg12(12),
--        tg13(13),
--        tg14(14),
--        tg15(15),
--        tg16(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Threshold Group specified by this entry."
    ::= { lsPerVcqRmThreshGrpEntry 1 }

lsPerVcqRmThreshGrpMaxSize OBJECT-TYPE
    SYNTAX INTEGER(-1..65535)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the maximum number of cells that may
         occupy this Threshold Group. While any integer in the range
         can be set, the hardware granularity is in 64-cell units. 
         Therefore, the value installed is [(value / 64) * 64] + 63. 
        
         If the value of this object is set to -1, the default
         value for the threshold-group is restored."
    DEFVAL { 65535 }
    ::= { lsPerVcqRmThreshGrpEntry 2 }

lsPerVcqRmThreshGrpQMaxSize OBJECT-TYPE
    SYNTAX INTEGER(31..16383)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects an explicit configuration of the
         maximum limit on the number of cells that may occupy
         connection queues that are a member of this Threshold
         Group. A connection queue that is a member of this
         Threshold Group will never have more cells resident
         in it than this limit. This is the queue limit applied
         when the Threshold Group is uncongested.  The QMaxSize
         must be greater than or equal to the Threshold Group 
         QMinSize. QMaxSize should be less than MaxSize for the
         Threshold Group.
        
         While any integer in the range can be set, the hardware 
         granularity is in 16-cell units. Therefore, the
         largest possible queue size installed is: 
         [(value / 16) * 16]+15"
    ::= { lsPerVcqRmThreshGrpEntry 3 }

lsPerVcqRmThreshGrpQMinSize OBJECT-TYPE
    SYNTAX INTEGER(1..1023)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects an explicit configuration of the
         minimum limit on the number of cells that may occupy
         connection queues that are a member of this Threshold
         Group. The Threshold Group at it's most congested will
         not limit a connection queue to fewer than this number
         of cells. The QMinSize must be less than or equal to 
         the Threshold Group QMaxSize. The hardware granularity
         is in units of one cell."
    ::= { lsPerVcqRmThreshGrpEntry 4 }

lsPerVcqRmThreshGrpDiscThreshold OBJECT-TYPE
    SYNTAX INTEGER(-1..100)
--  Units
--    percentage
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The output queue CLP/EPD threshold for this Threshold
         Group. This is expressed in percent-of-full. Note that
         100% full effectively turns off the threshold. Setting
         this object to -1 restores the default value for the
         Threshold Group. The granularity of the fill-level of 
         a queue installed in hardware is the same as that for 
         queue limits."
    ::= { lsPerVcqRmThreshGrpEntry 5 }

lsPerVcqRmThreshGrpMarkThreshold OBJECT-TYPE
    SYNTAX INTEGER(-1..100)
--  Units
--    percentage
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The output queue EFCI/ABR-RR marking threshold for
         this Threshold Group. This is expressed in
         percent-of-full. Note that 100% full effectively turns
         off the threshold. Setting this object to -1 restores
         the default value for the Threshold Group. The 
         granularity of the fill-level of a queue installed in 
         hardware is the same as that for queue limits."
    ::= { lsPerVcqRmThreshGrpEntry 6 }

lsPerVcqRmThreshGrpName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..20))
--    Rsyntax OCTET STRING(SIZE(0..20))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The name associated with the threshold-group. If
         this is set to the null-string, the default
         name for the Threshold Group is assigned."
    ::= { lsPerVcqRmThreshGrpEntry 7 }

lsPerVcqRmThreshGrpCellCount OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Count of the number of cells in the Threshold
         Group."
    ::= { lsPerVcqRmThreshGrpEntry 8 }

lsPerVcqRmThreshGrpServiceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LsPerVcqRmThreshGrpServiceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table specifying which
         VC or VP queues  are assigned to a Threshold
         Group."
    ::= { ciscoLsPerVcqAtmRmSwitch 2 }

lsPerVcqRmThreshGrpServiceEntry OBJECT-TYPE
    SYNTAX LsPerVcqRmThreshGrpServiceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the
         lsPerVcqRmThreshGrpServiceTable.  All entries 
         ever in the table are present at startup, none 
         are created dynamically."
    INDEX { lsPerVcqRmThreshGrpService }
    ::= { lsPerVcqRmThreshGrpServiceTable 1 }

LsPerVcqRmThreshGrpServiceEntry ::= SEQUENCE {
    lsPerVcqRmThreshGrpService LsPerVcqThresholdGroupService,
    lsPerVcqRmThreshGrpServGroup LsPerVcqThresholdGroup
    }

lsPerVcqRmThreshGrpService OBJECT-TYPE
    SYNTAX LsPerVcqThresholdGroupService
--    Rsyntax INTEGER {
--        cbr(1),
--        vbrRt(2),
--        vbrNrt(3),
--        abr(4),
--        ubr(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Service specified by this entry."
    ::= { lsPerVcqRmThreshGrpServiceEntry 1 }

lsPerVcqRmThreshGrpServGroup OBJECT-TYPE
    SYNTAX LsPerVcqThresholdGroup
--    Rsyntax INTEGER {
--        tg1(1),
--        tg2(2),
--        tg3(3),
--        tg4(4),
--        tg5(5),
--        tg6(6),
--        tg7(7),
--        tg8(8),
--        tg9(9),
--        tg10(10),
--        tg11(11),
--        tg12(12),
--        tg13(13),
--        tg14(14),
--        tg15(15),
--        tg16(16)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Threshold Group to which VC/VP queues specified
         by the service are assigned. Changing the assignment
         of service to Threshold Group does not alter the
         assignment for connections currently installed in
         hardware, but those connections that are subsequently
         installed."
    ::= { lsPerVcqRmThreshGrpServiceEntry 2 }

lsPerVcqRmHierarchicalSchedulingMode OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "On a LS1010 equipped with the Lightstream per-VC 
         queueing chipset, the
         user can define Hierarchical VP-Tunnels. Each such
         tunnel has its own dedicated scheduler, programmed
         to output data at a configurable maximum rate.
         Therefore, the overall output of the Hierarchical
         VP-tunnel is rate-limited. In addition, Virtual 
         Circuits of different service categories can 
         traverse through such a tunnel, and each of these
         Virtual Circuits are guaranteed their individual
         contracted bandwidth agreement.
        
         This object must be set to enabled before any
         Hierarchical VP-tunnels can be defined on the device.
        
         Any setting of this variable requires a reload 
         of the device to be effective.
        
         Setting this object to enabled will cause the 
         software to initialize the additional schedulers
         needed by the Hierarchical VP-Tunnels. Other
         limited scheduler resources are therefore used by a
         larger number of schedulers (as compared to the case
         when Hierarchical Scheduling is disabled on the device). 
         This may result in fewer number of connections 
         passing Connection Admission Control.
        
         This object is therefore provided so that the 
         user can make an informed decision as to whether
         Hierarchical Scheduling is to be used.
        
         This object is defined on a LS1010 only when 
         the switch is equipped with the Lightstream
         per-VC queueing chipset."
    DEFVAL { disabled }
    ::= { ciscoLsPerVcqAtmRmSwitch 3 }

cgrPerVcqRmThreshGrpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CgrPerVcqRmThreshGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing information
         for Switch Threshold Groups. When cells are
         queued in the switch for a direction of cell
         traffic on an ATM connection (VC or VP), several
         functions related to queueing are dictated
         by the congestion state (fullness) of the Threshold
         Group. Each connection queue is a member of
         a Threshold Group.
         These functions include:
         - The limit on the number of cells that can
           be queued. Cells exceeding this limit are
           discarded.
         - The discard threshold, used for CLP/EPD
           discard when the fullness of the queue exceeds
           the threshold.
         - The marking threshold, used for EFCI marking.
         Each Threshold Group has a maximum number of cells
         that can be resident in it at any one time. The
         number of cells in a Group consists of the number
         of cells in all the queues that are a member of
         the Group. As the number of cells in a Group
         approaches the maximum number for the Group,
         the queue limits may be decreased. This limits
         the share of  buffering available to each
         connection as cell-memory is used.
        
         On the Catalyst8540MSR platform, there are a
         maximum of 8 switching modules. Each switching
         module services a certain group of ports (this
         mapping is fixed in hardware). Each module also
         has its own cell memory (for per VC queueing),
         and hence performs its own congestion control,
         independent of any other switching module.
         Each switching module has its own set of
         Switch Threshold Groups, which are 
         independently programmable and readable.
        
         This table is supported only on the Catalyst8540MSR
         platform."
    ::= { ciscoCgrPerVcqAtmRmSwitch 1 }

cgrPerVcqRmThreshGrpEntry OBJECT-TYPE
    SYNTAX CgrPerVcqRmThreshGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the cgrPerVcqRmThreshGrpTable
         containing Resource Management configuration for a
         Threshold Group. All entries ever in the table are
         present at startup, none are created dynamically."
    INDEX { cgrPerVcqModuleId, cgrPerVcqRmThreshGrp }
    ::= { cgrPerVcqRmThreshGrpTable 1 }

CgrPerVcqRmThreshGrpEntry ::= SEQUENCE {
    cgrPerVcqModuleId CgrPerVcqModuleId,
    cgrPerVcqRmThreshGrp LsPerVcqThresholdGroup,
    cgrPerVcqRmThreshGrpMaxSize INTEGER,
    cgrPerVcqRmThreshGrpQMaxSize INTEGER,
    cgrPerVcqRmThreshGrpQMinSize INTEGER,
    cgrPerVcqRmThreshGrpDiscThreshold INTEGER,
    cgrPerVcqRmThreshGrpMarkThreshold INTEGER,
    cgrPerVcqRmThreshGrpName DisplayString,
    cgrPerVcqRmThreshGrpCellCount Gauge
    }

cgrPerVcqModuleId OBJECT-TYPE
    SYNTAX CgrPerVcqModuleId
--    Rsyntax INTEGER {
--        module1(1),
--        module2(2),
--        module3(3),
--        module4(4),
--        module5(5),
--        module6(6),
--        module7(7),
--        module8(8)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The switching module specified by this entry."
    ::= { cgrPerVcqRmThreshGrpEntry 1 }

cgrPerVcqRmThreshGrp OBJECT-TYPE
    SYNTAX LsPerVcqThresholdGroup
--    Rsyntax INTEGER {
--        tg1(1),
--        tg2(2),
--        tg3(3),
--        tg4(4),
--        tg5(5),
--        tg6(6),
--        tg7(7),
--        tg8(8),
--        tg9(9),
--        tg10(10),
--        tg11(11),
--        tg12(12),
--        tg13(13),
--        tg14(14),
--        tg15(15),
--        tg16(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Threshold Group specified by this entry."
    ::= { cgrPerVcqRmThreshGrpEntry 2 }

cgrPerVcqRmThreshGrpMaxSize OBJECT-TYPE
    SYNTAX INTEGER(-1..131071)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the maximum number of cells that may
         occupy this Threshold Group. While any integer in the range
         can be set, the hardware granularity is in 64-cell units.
         Therefore, the value installed is [(value / 64) * 64] + 63.
        
         Even though the maximum value for this object is 131071,
         the cell memory actually present in hardware can be
         less.
        
         The agent will allow values for this object not exceeding
         the actual cell memory present in hardware.
        
         If the value of this object is set to -1, the default
         value for the threshold-group is restored."
    DEFVAL { 131071 }
    ::= { cgrPerVcqRmThreshGrpEntry 3 }

cgrPerVcqRmThreshGrpQMaxSize OBJECT-TYPE
    SYNTAX INTEGER(31..16383)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects an explicit configuration of the
         maximum limit on the number of cells that may occupy
         connection queues that are a member of this Threshold
         Group. A connection queue that is a member of this
         Threshold Group will never have more cells resident
         in it than this limit. This is the queue limit applied
         when the Threshold Group is uncongested.  The QMaxSize
         must be greater than or equal to the Threshold Group
         QMinSize. QMaxSize should be less than MaxSize for the
         Threshold Group.
        
         While any integer in the range can be set, the hardware
         granularity is in 16-cell units. Therefore, the
         largest possible queue size installed is:
         [(value / 16) * 16]+15"
    ::= { cgrPerVcqRmThreshGrpEntry 4 }

cgrPerVcqRmThreshGrpQMinSize OBJECT-TYPE
    SYNTAX INTEGER(1..1023)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects an explicit configuration of the
         minimum limit on the number of cells that may occupy
         connection queues that are a member of this Threshold
         Group. The Threshold Group at it's most congested will
         not limit a connection queue to fewer than this number
         of cells. The QMinSize must be less than or equal to
         the Threshold Group QMaxSize. The hardware granularity
         is in units of one cell."
    ::= { cgrPerVcqRmThreshGrpEntry 5 }

cgrPerVcqRmThreshGrpDiscThreshold OBJECT-TYPE
    SYNTAX INTEGER(-1..100)
--  Units
--    percentage
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The output queue CLP/EPD threshold for this Threshold
         Group. This is expressed in percent-of-full. Note that
         100% full effectively turns off the threshold. Setting
         this object to -1 restores the default value for the
         Threshold Group. The granularity of the fill-level of
         a queue installed in hardware is the same as that for
         queue limits."
    ::= { cgrPerVcqRmThreshGrpEntry 6 }

cgrPerVcqRmThreshGrpMarkThreshold OBJECT-TYPE
    SYNTAX INTEGER(-1..100)
--  Units
--    percentage
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The output queue EFCI/ABR-RR marking threshold for
         this Threshold Group. This is expressed in
         percent-of-full. Note that 100% full effectively turns
         off the threshold. Setting this object to -1 restores
         the default value for the Threshold Group. The
         granularity of the fill-level of a queue installed in
         hardware is the same as that for queue limits."
    ::= { cgrPerVcqRmThreshGrpEntry 7 }

cgrPerVcqRmThreshGrpName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..20))
--    Rsyntax OCTET STRING(SIZE(0..20))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The name associated with the threshold-group. If
         this is set to the null-string, the default
         name for the Threshold Group is assigned."
    ::= { cgrPerVcqRmThreshGrpEntry 8 }

cgrPerVcqRmThreshGrpCellCount OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Count of the number of cells in the Threshold
         Group."
    ::= { cgrPerVcqRmThreshGrpEntry 9 }

cgrPerVcqRmThreshGrpServiceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CgrPerVcqRmThreshGrpServiceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table specifying which
         VC or VP queues  are assigned to a Threshold
         Group.
        
         This table is supported only on the Catalyst8540MSR
         Platform."
    ::= { ciscoCgrPerVcqAtmRmSwitch 2 }

cgrPerVcqRmThreshGrpServiceEntry OBJECT-TYPE
    SYNTAX CgrPerVcqRmThreshGrpServiceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the
         cgrPerVcqRmThreshGrpServiceTable.  All entries
         ever in the table are present at startup, none
         are created dynamically."
    INDEX { cgrPerVcqRmThreshGrpService }
    ::= { cgrPerVcqRmThreshGrpServiceTable 1 }

CgrPerVcqRmThreshGrpServiceEntry ::= SEQUENCE {
    cgrPerVcqRmThreshGrpService LsPerVcqThresholdGroupService,
    cgrPerVcqRmThreshGrpServGroup LsPerVcqThresholdGroup
    }

cgrPerVcqRmThreshGrpService OBJECT-TYPE
    SYNTAX LsPerVcqThresholdGroupService
--    Rsyntax INTEGER {
--        cbr(1),
--        vbrRt(2),
--        vbrNrt(3),
--        abr(4),
--        ubr(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Service specified by this entry."
    ::= { cgrPerVcqRmThreshGrpServiceEntry 1 }

cgrPerVcqRmThreshGrpServGroup OBJECT-TYPE
    SYNTAX LsPerVcqThresholdGroup
--    Rsyntax INTEGER {
--        tg1(1),
--        tg2(2),
--        tg3(3),
--        tg4(4),
--        tg5(5),
--        tg6(6),
--        tg7(7),
--        tg8(8),
--        tg9(9),
--        tg10(10),
--        tg11(11),
--        tg12(12),
--        tg13(13),
--        tg14(14),
--        tg15(15),
--        tg16(16)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Threshold Group to which VC/VP queues specified
         by the service are assigned. Changing the assignment
         of service to Threshold Group does not alter the
         assignment for connections currently installed in
         hardware, but those connections that are subsequently
         installed."
    ::= { cgrPerVcqRmThreshGrpServiceEntry 2 }

cgrPerVcqRmHierarchicalSchedulingMode OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "On a Catalyst8540 MSR, the user can define Hierarchical
         VP-Tunnels. Each such tunnel has its own dedicated
         scheduler, programmed to output data at a configurable
         maximum rate. 
        
         Therefore, the overall output of the Hierarchical
         VP-tunnel is rate-limited. In addition, Virtual
         Circuits of different service categories can
         traverse through such a tunnel, and each of these
         Virtual Circuits are guaranteed their individual
         contracted bandwidth agreement.
        
         This object must be set to enabled before any
         Hierarchical VP-tunnels can be defined on the device.
        
         Any setting of this variable requires a reload
         of the device to be effective.
        
         Setting this object to enabled will cause the
         software to initialize the additional schedulers
         needed by the Hierarchical VP-Tunnels. Other
         limited scheduler resources are therefore used by a
         larger number of schedulers (as compared to the case
         when Hierarchical Scheduling is disabled on the device).
         This may result in fewer number of connections
         passing Connection Admission Control.
        
         This object is therefore provided so that the
         user can make an informed decision as to whether
         Hierarchical Scheduling is to be used.
        
         This object is supported only on the Catalyst8540MSR
         platform."
    DEFVAL { disabled }
    ::= { ciscoCgrPerVcqAtmRmSwitch 3 }

lsPerVcqRmIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LsPerVcqRmIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing configuration information
         for ATM physical interfaces."
    ::= { ciscoLsPerVcqAtmRmIf 1 }

lsPerVcqRmIfEntry OBJECT-TYPE
    SYNTAX LsPerVcqRmIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the lsPerVcqRmIfTable
         containing Resource Management configuration for an ATM
         interface. An entry in the table is present when an 
         entry in the ifTable is created for an ATM interface 
         that uses the Lighstream per-VC queueing chipset."
    INDEX { ifIndex }
    ::= { lsPerVcqRmIfTable 1 }

LsPerVcqRmIfEntry ::= SEQUENCE {
    lsPerVcqRmIfMinWrrServiceClass LsPerVcqServiceClass
    }

lsPerVcqRmIfMinWrrServiceClass OBJECT-TYPE
    SYNTAX LsPerVcqServiceClass
--    Rsyntax INTEGER {
--        c1(1),
--        c2(2),
--        c3(3),
--        c4(4),
--        c5(5),
--        c6(6),
--        c7(7),
--        c8(8)
--        }
--  Units
--    service class
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The service classes on an interface are partitioned
         into two subsets, dictating how a service class
         with a cell ready to transmit is chosen (subsequently
         a connection is chosen within the selected service
         class). There are two subsets: Strict Priority (SP),
         and Weighted Round Robin (WRR). The SP subset
         service classes are selected by strict priority (highest
         priority with available cell wins). If there are any SP
         service classes, they take precedence over any WRR
         classes.
         A WRR subset service class is chosen from among the
         WRR service classes with an available cell using a
         WRR algorithm.
         The SP service classes (if any) include a contiguous
         range of classes, starting with c2 (c1 is dedicated to
         CBR, which doesn't use SP/WRR).  The WRR service
         classes (if any) include a contiguous range of classes,
         ending with c5.
         This object specifies the break-point between SP and WRR
         service classes. Note that (assuming all service classes
         are used) specifying c2 indicates all service classes are
         WRR, and specifying c5 indicates all service classes 
         are SP."
    ::= { lsPerVcqRmIfEntry 1 }

lsPerVcqRmIfServiceClassTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LsPerVcqRmIfServiceClassEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing configuration information
         for ATM physical interface Service Classes (not
         logical port ATM interfaces). An ATM connection (VC or VP)
         on an interface is a member of a Service Class. The
         Service Class is used in the scheduling discipline that
         determines which cell is next transmitted on the
         interface. If the rate scheduler has no cell
         to be sent in the guaranteed cell-flow on an interface,
         a decision is made between all Service Classes with
         VCs with cells ready for transmit."
    ::= { ciscoLsPerVcqAtmRmIf 2 }

lsPerVcqRmIfServiceClassEntry OBJECT-TYPE
    SYNTAX LsPerVcqRmIfServiceClassEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the lsPerVcqRmIfServiceClassTable
         containing Resource Management configuration for an ATM
         interface.  A particular row is identified by the
         value of MIB-II's ifIndex, and the output queue.
         An entry in the table is present when an entry in 
         the ifTable is created for an ATM interface that 
         uses the Lighstream per-VC queueing chipset."
    INDEX { ifIndex, lsPerVcqRmIfServiceClass }
    ::= { lsPerVcqRmIfServiceClassTable 1 }

LsPerVcqRmIfServiceClassEntry ::= SEQUENCE {
    lsPerVcqRmIfServiceClass LsPerVcqServiceClass,
    lsPerVcqRmIfServClassConnType INTEGER,
    lsPerVcqRmIfServClassWrrWeight INTEGER
    }

lsPerVcqRmIfServiceClass OBJECT-TYPE
    SYNTAX LsPerVcqServiceClass
--    Rsyntax INTEGER {
--        c1(1),
--        c2(2),
--        c3(3),
--        c4(4),
--        c5(5),
--        c6(6),
--        c7(7),
--        c8(8)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The service class on this ATM interface."
    ::= { lsPerVcqRmIfServiceClassEntry 1 }

lsPerVcqRmIfServClassConnType OBJECT-TYPE
    SYNTAX INTEGER(1..31)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The types of connections using this service class on
         this ATM interface.
             The various bit positions are:
              1    constant bit rate (cbr)
              2    variable bit rate-real time (vbr-rt)
              4    variable bit rate-non real time (vbr-nrt)
              8    available bit rate (abr)
             16    unspecified bit rate (ubr)"
    ::= { lsPerVcqRmIfServiceClassEntry 2 }

lsPerVcqRmIfServClassWrrWeight OBJECT-TYPE
    SYNTAX INTEGER(1..15)
--  Units
--    weight
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Configure the weighting specified for a service class
         to make the scheduling decision among active service
         classes in the WRR subset."
    ::= { lsPerVcqRmIfServiceClassEntry 3 }

rmTrafficShaperIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RmTrafficShaperIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing ATM Traffic 
         Shaper configuration  and state information for 
         ATM interfaces."
    ::= { ciscoAtmRmTrafShaperIf 1 }

rmTrafficShaperIfEntry OBJECT-TYPE
    SYNTAX RmTrafficShaperIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the rmTrafficShaperIfTable
         containing Traffic Shaper configuration and state 
         information for an ATM interface.  The particular 
         interface is identified by the value of MIB-II's 
         ifIndex."
    INDEX { ifIndex }
    ::= { rmTrafficShaperIfTable 1 }

RmTrafficShaperIfEntry ::= SEQUENCE {
    rtsIfMaxThreshold Gauge,
    rtsIfCellCount Gauge,
    rtsIfVbrCfgRequested INTEGER,
    rtsIfVbrCfgInstalled INTEGER,
    rtsIfBeCfgRequested INTEGER,
    rtsIfBeCfgInstalled INTEGER,
    rtsIfVbrClassMaxThrshRequested INTEGER,
    rtsIfVbrClassMaxThrshInstalled Gauge,
    rtsIfBeClassMaxThrshRequested INTEGER,
    rtsIfBeClassMaxThrshInstalled Gauge,
    rtsIfVbrVcMaxThrshRequested Gauge,
    rtsIfVbrVcMaxThrshInstalled Gauge,
    rtsIfBeVcMaxThrshRequested Gauge,
    rtsIfBeVcMaxThrshInstalled Gauge
    }

rtsIfMaxThreshold OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the value of the Maximum 
         Threshold installed in the traffic shaper hardware
         for this interface.  This object is expressed in 
         number of cell buffers.  This object is not 
         instantiated for interfaces to which it cannot 
         be applied."
    ::= { rmTrafficShaperIfEntry 1 }

rtsIfCellCount OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object contains the count of cells queued to
         this interface in the traffic shaping hardware. 
         This object is not instantiated for interfaces to 
         which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 2 }

rtsIfVbrCfgRequested OBJECT-TYPE
    SYNTAX INTEGER {
        shapingDisable(1),
        shapeToPcr(2),
        shapeToScrAndPcr(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "If this object is set to the value 'shapingDisable', 
         VBR connections(VC or VP) on this interface will not 
         be shaped.  If the object is set to the value 
         'shapeToScrAndPcr', the VBR (VC or VP) connections on
         this interface will be shaped to conform to their 
         respective SCR, PCR and MBS traffic parameters.  If 
         this object is set to the value 'shapeToPcr', the VBR 
         (VC or VP) connections on this interface will be shaped
         to conform to their respective PCR traffic parameter.
         Depending on the capabilities of the traffic shaping 
         hardware, the changes to the traffic shaping 
         configuration may or may not take effect immediately 
         and may require that the traffic shaping hardware be 
         reset to effect the change.  The value of the object 
         rtsIfVbrCfgInstalled will reflect the actual VBR 
         Traffic Shaping configuration installed in the 
         hardware currently.  Depending on the capabilities of 
         the traffic shaping hardware, the value of this object 
         may or may not apply to terminating VBR VPs on this 
         interface.  This object is not instantiated for 
         interfaces to which it cannot be applied."
    DEFVAL { shapingDisable }
    ::= { rmTrafficShaperIfEntry 3 }

rtsIfVbrCfgInstalled OBJECT-TYPE
    SYNTAX INTEGER {
        shapingDisable(1),
        shapeToPcr(2),
        shapeToScrAndPcr(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the current VBR Traffic Shaping 
         configuration installed in the hardware. This object 
         is not instantiated for interfaces to which it cannot 
         be applied."
    ::= { rmTrafficShaperIfEntry 4 }

rtsIfBeCfgRequested OBJECT-TYPE
    SYNTAX INTEGER {
        shapingDisable(1),
        shapeToPcr(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects the traffic shaping configuration
         applied to Best-Effort Connections(VC or VP) belonging 
         to UBR and ABR service categories on this interface.  
         If this object is set to the value 'shapingDisable',
         best-effort connections(VC or VP) on this interface 
         will not be shaped. If this object is set to the value 
         'shapeToPcr', the best-effort connections(VC or VP) on
         this interface will be shaped to conform to their 
         respective PCR traffic parameter. Depending on the 
         capabilities of the traffic shaping hardware, the
         changes to the traffic shaping configuration may or
         may not take effect immediately and may require that 
         the traffic shaping hardware be reset to effect the 
         change.  The object rtsIfBeCfgInstalled will reflect
         the actual best-effort Traffic Shaping configuration 
         installed in the hardware currently. Depending on the 
         capabilities of the traffic shaping hardware, the value 
         of this object may or may not apply to terminating 
         best-effort VPs on this interface.  This object is
         not instantiated for interfaces to which it cannot 
         be applied."
    DEFVAL { shapingDisable }
    ::= { rmTrafficShaperIfEntry 5 }

rtsIfBeCfgInstalled OBJECT-TYPE
    SYNTAX INTEGER {
        shapingDisable(1),
        shapeToPcr(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the current Best-Effort Traffic
         Shaping configuration installed in the hardware. 
         This object is not instantiated for interfaces to 
         which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 6 }

rtsIfVbrClassMaxThrshRequested OBJECT-TYPE
    SYNTAX INTEGER(1..95)
--  Units
--    percent
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Traffic Shaper Maximum
         Cell Buffer Threshold for the VBR Traffic Class.
         The value of this object is expressed as a percent
         of the value of rtsIfMaxThreshold object.  A set 
         request for this object will succeed only if the
         value of the ifAdminStatus object for this 
         interface is 'down'. The Traffic Shaping hardware 
         may not have the support to represent all the 
         values and hence the value installed in hardware 
         could be different.  And the value installed in 
         hardware will be available through the object 
         rtsIfVbrClassMaxThrshInstalled. This object is 
         not instantiated for interfaces to which 
         it cannot be applied."
    ::= { rmTrafficShaperIfEntry 7 }

rtsIfVbrClassMaxThrshInstalled OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the value of Maximum Class 
         Threshold for VBR Traffic Class, in number of
         cell buffers, that is installed in the Traffic 
         Shaping hardware. This object is not instantiated 
         for interfaces to which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 8 }

rtsIfBeClassMaxThrshRequested OBJECT-TYPE
    SYNTAX INTEGER(1..95)
--  Units
--    percent
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Traffic Shaper Maximum Cell
         Buffer Threshold for the Best-Effort Traffic Class. 
         The value of this object is expressed as a percent of
         the value of rtsIfMaxThreshold object.  A set request 
         for this object will succeed only if the value of the 
         ifAdminStatus object for this interface is 'down'. 
         The Traffic Shaping hardware may not have the support 
         to represent all the values and hence the value 
         installed in hardware could be different.  And this 
         installed value will be available through the object 
         rtsIfBeClassMaxThrshInstalled. This object is not 
         instantiated for interfaces to which it cannot 
         be applied."
    ::= { rmTrafficShaperIfEntry 9 }

rtsIfBeClassMaxThrshInstalled OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the value of Maximum Class 
         Threshold for Best-Effort Traffic Class, in number 
         of cell buffers, that is installed in the Traffic 
         Shaping hardware. This object is not instantiated 
         for interfaces to which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 10 }

rtsIfVbrVcMaxThrshRequested OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects the Maximum Threshold of the
         per-connection queues of VBR connections(VCs or VPs) in 
         the traffic shaping hardware. The value of this object 
         is expressed in number of cell buffers.  Any change made
         to the value of this object will only effect subsequently 
         established VBR connections and will not impact already 
         existing VBR connections.  The Traffic Shaping hardware 
         may not have the support to represent all the values and 
         hence the value installed in hardware could be different.
         And the value installed in hardware will be available 
         through the object rtsIfVbrVcMaxThrshInstalled. This 
         object is not instantiated for interfaces to which it 
         cannot be applied."
    DEFVAL { 512 }
    ::= { rmTrafficShaperIfEntry 11 }

rtsIfVbrVcMaxThrshInstalled OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the Maximum Threshold for the 
         per-connection queues of VBR connections(VCs or VPs)
         that is installed in the Traffic Shaping hardware.
         The value of this object is expressed in number of 
         cell buffers.  This object is not instantiated for 
         interfaces to which it cannot be applied."
    ::= { rmTrafficShaperIfEntry 12 }

rtsIfBeVcMaxThrshRequested OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    cells
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object reflects the Maximum Threshold of the
         per-connection queues of best-effort connections(VCs 
         or VPs) in the traffic shaping hardware. The value 
         of this object is expressed in number of cell
         buffers.  Any change made to the value of this 
         object will only effect subsequently established 
         best-effort connections and will not impact already
         existing best-effort connections. The Traffic Shaping
         hardware may not have the support to represent all
         the values and hence the value installed in hardware 
         could be different. And the value installed in 
         hardware will be available through the object 
         rtsIfBeVcMaxThrshInstalled.  This object is not 
         instantiated for interfaces to which it cannot
         be applied."
    DEFVAL { 1024 }
    ::= { rmTrafficShaperIfEntry 13 }

rtsIfBeVcMaxThrshInstalled OBJECT-TYPE
    SYNTAX Gauge(0..4294967295)
--  Units
--    cells
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the Maximum Threshold for the 
         per-connection queues of Best-Effort connections(VCs
         or VPs) that is installed in the Traffic Shaping 
         hardware.  The value of this object is expressed 
         in number of cell buffers.  This object is not 
         instantiated for interfaces to which it cannot 
         be applied."
    ::= { rmTrafficShaperIfEntry 14 }

atmRmSwitchCfgMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM Switch Resource
--     Management configuration.
--  objects
--    rmSwitchOverSubFactor, rmSwitchScrMarginFactor, 
--    rmSwitchAbrCongNotify, rmScDefaultQosMaxCtd, 
--    rmScDefaultQosPeakToPeakCdv, rmScDefaultQosClr

sharedMemAtmRmSwitchMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM Switch Resource
--     Management information global to a shared-memory ATM switch.
--  objects
--    sharedMemRmSwitchQueuedCellLimit, 
--    sharedMemRmSwitchQueuedCellCount

atmRmPhyIfCfgMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface
--     Resource Management configuration for physical interfaces.
--  objects
--    rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled, 
--    rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg, 
--    rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr, 
--    rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr

atmRmAllIfCfgMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management configuration for all interfaces.
--  objects
--    rmIfLinkDistance, rmIfBestEffortLimit, rmIfDirMaxCbrPcr, 
--    rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr, rmIfDirMaxVbrScr, 
--    rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr, 
--    rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, 
--    rmIfDirMaxUbrTolerance

atmRmIfAllStateMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management status for all interfaces.
--  objects
--    rmIfScRxAcr, rmIfScTxAcr, rmIfScRxAlcr, rmIfScTxAlcr, 
--    rmIfScNumSvxConns, rmIfScNumPvxConns, rmIfScTxMaxCtd, 
--    rmIfScTxP2PeakCdv, rmIfScTxClr

atmRmIfStatsMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM Switch Resource
--     Management statistics.
--  objects
--    rmIfScRcacResultNumAdmit, rmIfScRcacResultNumTotalRequests, 
--    rmIfScRcacResultNumFailTraffComb, rmIfScRcacResultNumFailBw, 
--    rmIfScRcacResultNumFailLoss, rmIfScRcacResultNumFailDelay, 
--    rmIfScRcacResultNumFailCdv, rmIfScRcacResultNumFailBeLimit, 
--    rmIfScRcacResultNumFailParmLimit, 
--    rmIfScRcacResultNumFailOther

sharedMemAtmRmPhyIfMIBGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 7 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM interface
--     Resource Management information for physical interfaces
--     of a shared-memory ATM switch.
--  objects
--    sharedMemRmIfOutputQServCategory, 
--    sharedMemRmIfOutputQRequestedMaxSize, 
--    sharedMemRmIfOutputQInstalledMaxSize, 
--    sharedMemRmIfOutputQMaxSizeForce, 
--    sharedMemRmIfOutputQCellCount, sharedMemRmIfDiscardThreshold, 
--    sharedMemRmIfEfciThreshold, 
--    sharedMemRmIfAbrRelativeRateThreshold

atmRmSwitchCfgMIBGroup2 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 8 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM Switch Resource
--     Management configuration.
--  objects
--    rmSwitchOverSubFactor, rmSwitchScrMarginFactor, 
--    rmSwitchAbrCongNotify, rmScDefaultQosMaxCtd, 
--    rmScDefaultQosPeakToPeakCdv, rmScDefaultQosClr, 
--    rmScDefaultQosClrClp01

atmRmPhyIfCfgMIBGroup2 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 9 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface
--     Resource Management configuration for physical interfaces.
--  objects
--    rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled, 
--    rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg, 
--    rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr, 
--    rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr, 
--    rmIfCbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcTolerance, 
--    rmIfVbrNrtDefaultRxUpcTolerance, rmIfAbrDefaultRxUpcTolerance, 
--    rmIfUbrDefaultRxUpcTolerance

atmRmIfAllStateMIBGroup2 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 10 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management status for all interfaces.
--  objects
--    rmIfScRxAcr, rmIfScTxAcr, rmIfScRxAlcr, rmIfScTxAlcr, 
--    rmIfScNumSvxConns, rmIfScNumPvxConns, rmIfScTxMaxCtd, 
--    rmIfScTxP2PeakCdv, rmIfScTxClr, rmIfScTxClrClp01

lsPerVcqAtmRmGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 11 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM Resource
--     Management status on platforms using the Lightstream
--     per-VC queueing chipset.
--  objects
--    lsPerVcqRmIfMinWrrServiceClass, lsPerVcqRmIfServClassConnType, 
--    lsPerVcqRmIfServClassWrrWeight, lsPerVcqRmThreshGrpMaxSize, 
--    lsPerVcqRmThreshGrpQMaxSize, lsPerVcqRmThreshGrpQMinSize, 
--    lsPerVcqRmThreshGrpDiscThreshold, 
--    lsPerVcqRmThreshGrpMarkThreshold, lsPerVcqRmThreshGrpName, 
--    lsPerVcqRmThreshGrpCellCount, lsPerVcqRmThreshGrpServGroup

atmRmPhyIfCfgMIBGroup3 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 12 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface
--     Resource Management configuration for physical interfaces.
--  objects
--    rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled, 
--    rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg, 
--    rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr, 
--    rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr, 
--    rmIfCbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcTolerance, 
--    rmIfVbrNrtDefaultRxUpcTolerance, rmIfAbrDefaultRxUpcTolerance, 
--    rmIfUbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcCdvt, 
--    rmIfVbrNrtDefaultRxUpcCdvt, rmIfDirControlLinkShareMinAbr, 
--    rmIfDirControlLinkShareMaxAbr, rmIfDirControlLinkShareMinUbr, 
--    rmIfDirControlLinkShareMaxUbr

atmRmAllIfCfgMIBGroup2 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 13 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management configuration for all interfaces.
--  objects
--    rmIfLinkDistance, rmIfBestEffortLimit, rmIfDirMaxCbrPcr, 
--    rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr, rmIfDirMaxVbrScr, 
--    rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr, 
--    rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, 
--    rmIfDirMaxUbrTolerance, rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, 
--    rmIfDirMaxVbrCdvt

atmRmAllIfCfgMIBGroup3 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 14 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management configuration for all interfaces.
--  objects
--    rmIfLinkDistance, rmIfBestEffortLimit, rmIfDirMaxCbrPcr, 
--    rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr, rmIfDirMaxVbrScr, 
--    rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr, 
--    rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, 
--    rmIfDirMaxUbrTolerance, rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, 
--    rmIfDirMaxVbrCdvt, rmIfServCategorySupport

lsPerVcqAtmRmGroup2 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 15 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM Resource
--     Management status on platforms using the Lightstream
--     per-VC queueing chipset.
--  objects
--    lsPerVcqRmIfMinWrrServiceClass, lsPerVcqRmIfServClassConnType, 
--    lsPerVcqRmIfServClassWrrWeight, lsPerVcqRmThreshGrpMaxSize, 
--    lsPerVcqRmThreshGrpQMaxSize, lsPerVcqRmThreshGrpQMinSize, 
--    lsPerVcqRmThreshGrpDiscThreshold, 
--    lsPerVcqRmThreshGrpMarkThreshold, lsPerVcqRmThreshGrpName, 
--    lsPerVcqRmThreshGrpCellCount, lsPerVcqRmThreshGrpServGroup, 
--    lsPerVcqRmHierarchicalSchedulingMode

cgrPerVcqAtmRmGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 16 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM Resource
--     Management status on the Catalyst8540MSR platform.
--  objects
--    cgrPerVcqRmThreshGrpQMaxSize, cgrPerVcqRmThreshGrpQMinSize, 
--    cgrPerVcqRmThreshGrpDiscThreshold, 
--    cgrPerVcqRmThreshGrpMarkThreshold, cgrPerVcqRmThreshGrpName, 
--    cgrPerVcqRmThreshGrpCellCount, cgrPerVcqRmThreshGrpServGroup, 
--    cgrPerVcqRmHierarchicalSchedulingMode

atmRmAllIfCfgMIBGroup4 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 17 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management configuration for all interfaces.
--  objects
--    rmIfLinkDistance, rmIfBestEffortLimit, rmIfDirMaxCbrPcr, 
--    rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr, rmIfDirMaxVbrScr, 
--    rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr, 
--    rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, 
--    rmIfDirMaxUbrTolerance, rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, 
--    rmIfDirMaxVbrCdvt, rmIfServCategorySupport, 
--    rmIfCbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcTolerance, 
--    rmIfVbrNrtDefaultRxUpcTolerance, rmIfAbrDefaultRxUpcTolerance, 
--    rmIfUbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcCdvt, 
--    rmIfVbrNrtDefaultRxUpcCdvt

atmRmPhyIfCfgMIBGroup4 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 18 }
-- OBJECT-GROUP
--  Status
--    obsolete
--  Descr
--    A collection of objects which provide ATM interface
--     Resource Management configuration for physical interfaces.
--  objects
--    rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled, 
--    rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg, 
--    rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr, 
--    rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr, 
--    rmIfDirControlLinkShareMinAbr, rmIfDirControlLinkShareMaxAbr, 
--    rmIfDirControlLinkShareMinUbr, rmIfDirControlLinkShareMaxUbr

atmRmPhyIfCfgMIBGroup5 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 19 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM interface
--     Resource Management configuration for physical interfaces.
--  objects
--    rmIfOutPacingRateRequested, rmIfOutPacingRateInstalled, 
--    rmIfOutPacingForce, rmIfDirControlLinkShareMaxAgg, 
--    rmIfDirControlLinkShareMinCbr, rmIfDirControlLinkShareMaxCbr, 
--    rmIfDirControlLinkShareMinVbr, rmIfDirControlLinkShareMaxVbr, 
--    rmIfDirControlLinkShareMinAbr, rmIfDirControlLinkShareMaxAbr, 
--    rmIfDirControlLinkShareMinUbr, rmIfDirControlLinkShareMaxUbr, 
--    rmIfFramingOverhead, rmIfFramingOverheadForce

atmRmIfAllStateMIBGroup3 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 20 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management status for all interfaces.
--  objects
--    rmIfScRxAcr, rmIfScTxAcr, rmIfScRxAlcr, rmIfScTxAlcr, 
--    rmIfScNumSvxConns, rmIfScNumPvxConns, rmIfScTxMaxCtd, 
--    rmIfScTxP2PeakCdv, rmIfScTxClr, rmIfScTxClrClp01, 
--    rmIfScRxDynBwSvcAcr, rmIfScTxDynBwSvcAcr

atmRmAllIfCfgMIBGroup5 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 21 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    A collection of objects which provide ATM interface Resource
--     Management configuration for all interfaces.
--  objects
--    rmIfLinkDistance, rmIfBestEffortLimit, rmIfDirMaxCbrPcr, 
--    rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr, rmIfDirMaxVbrScr, 
--    rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr, 
--    rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, 
--    rmIfDirMaxUbrTolerance, rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, 
--    rmIfDirMaxVbrCdvt, rmIfServCategorySupport, 
--    rmIfCbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcTolerance, 
--    rmIfVbrNrtDefaultRxUpcTolerance, rmIfAbrDefaultRxUpcTolerance, 
--    rmIfUbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcCdvt, 
--    rmIfVbrNrtDefaultRxUpcCdvt, rmIfOverBooking

cgrPerVcqAtmRmGroup2 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 22 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM Resource
--     Management status on the Catalyst8540MSR platform.
--  objects
--    cgrPerVcqRmThreshGrpQMaxSize, cgrPerVcqRmThreshGrpQMinSize, 
--    cgrPerVcqRmThreshGrpDiscThreshold, 
--    cgrPerVcqRmThreshGrpMaxSize, 
--    cgrPerVcqRmThreshGrpMarkThreshold, cgrPerVcqRmThreshGrpName, 
--    cgrPerVcqRmThreshGrpCellCount, cgrPerVcqRmThreshGrpServGroup, 
--    cgrPerVcqRmHierarchicalSchedulingMode

atmRmTrafficShaperIfGroup OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 23 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM Traffic Shaper 
--     configuration and state information for ATM interfaces.
--  objects
--    rtsIfMaxThreshold, rtsIfCellCount, rtsIfVbrCfgRequested, 
--    rtsIfVbrCfgInstalled, rtsIfBeCfgRequested, 
--    rtsIfBeCfgInstalled, rtsIfVbrClassMaxThrshRequested, 
--    rtsIfVbrClassMaxThrshInstalled, rtsIfBeClassMaxThrshRequested, 
--    rtsIfBeClassMaxThrshInstalled, rtsIfVbrVcMaxThrshRequested, 
--    rtsIfVbrVcMaxThrshInstalled, rtsIfBeVcMaxThrshRequested, 
--    rtsIfBeVcMaxThrshInstalled

atmRmAllIfCfgMIBGroup6 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBGroups 24 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provide ATM 
--     interface Resource Management configuration 
--     for all interfaces.
--  objects
--    rmIfLinkDistance, rmIfBestEffortLimit, rmIfDirMaxCbrPcr, 
--    rmIfDirMaxCbrTolerance, rmIfDirMaxVbrPcr, rmIfDirMaxVbrScr, 
--    rmIfDirMaxVbrTolerance, rmIfDirMaxAbrPcr, 
--    rmIfDirMaxAbrTolerance, rmIfDirMaxUbrPcr, 
--    rmIfDirMaxUbrTolerance, rmIfDirMaxAbrMcr, rmIfDirMaxUbrMcr, 
--    rmIfDirMaxVbrCdvt, rmIfServCategorySupport, 
--    rmIfCbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcTolerance, 
--    rmIfVbrNrtDefaultRxUpcTolerance, rmIfAbrDefaultRxUpcTolerance, 
--    rmIfUbrDefaultRxUpcTolerance, rmIfVbrRtDefaultRxUpcCdvt, 
--    rmIfVbrNrtDefaultRxUpcCdvt, rmIfOverBooking, 
--    rmIfVbrRtPerClassOverbooking, rmIfVbrNrtPerClassOverbooking, 
--    rmIfAbrPerClassOverbooking, rmIfUbrPerClassOverbooking

ciscoAtmRmMIBCompliance OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management 
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup
--   MandGroup
--    atmRmPhyIfCfgMIBGroup
--   MandGroup
--    atmRmAllIfCfgMIBGroup
--   MandGroup
--    atmRmIfAllStateMIBGroup
--   MandGroup
--    atmRmIfStatsMIBGroup

ciscoAtmRmMIBCompliance2 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup2
--   MandGroup
--    atmRmAllIfCfgMIBGroup
--   MandGroup
--    atmRmIfAllStateMIBGroup2
--   MandGroup
--    atmRmIfStatsMIBGroup

ciscoAtmRmMIBCompliance3 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 3 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup3
--   MandGroup
--    atmRmAllIfCfgMIBGroup2
--   MandGroup
--    atmRmIfAllStateMIBGroup2
--   MandGroup
--    atmRmIfStatsMIBGroup

ciscoAtmRmMIBCompliance4 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 4 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup3
--   MandGroup
--    atmRmAllIfCfgMIBGroup3
--   MandGroup
--    atmRmIfAllStateMIBGroup2
--   MandGroup
--    atmRmIfStatsMIBGroup

ciscoAtmRmMIBCompliance5 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 5 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup3
--   MandGroup
--    atmRmAllIfCfgMIBGroup3
--   MandGroup
--    atmRmIfAllStateMIBGroup2
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2

ciscoAtmRmMIBCompliance6 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 6 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup3
--   MandGroup
--    atmRmAllIfCfgMIBGroup3
--   MandGroup
--    atmRmIfAllStateMIBGroup2
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup

ciscoAtmRmMIBCompliance7 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 7 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup4
--   MandGroup
--    atmRmAllIfCfgMIBGroup4
--   MandGroup
--    atmRmIfAllStateMIBGroup2
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup

ciscoAtmRmMIBCompliance8 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 8 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup5
--   MandGroup
--    atmRmAllIfCfgMIBGroup4
--   MandGroup
--    atmRmIfAllStateMIBGroup2
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup

ciscoAtmRmMIBCompliance9 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 9 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup5
--   MandGroup
--    atmRmAllIfCfgMIBGroup4
--   MandGroup
--    atmRmIfAllStateMIBGroup3
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup

ciscoAtmRmMIBCompliance10 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 10 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup5
--   MandGroup
--    atmRmAllIfCfgMIBGroup5
--   MandGroup
--    atmRmIfAllStateMIBGroup3
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup

ciscoAtmRmMIBCompliance11 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 11 }
-- MODULE-COMPLIANCE
--  Status
--    obsolete
--  Descr
--    The compliance statement for the Cisco ATM Resource Management
--     MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup5
--   MandGroup
--    atmRmAllIfCfgMIBGroup5
--   MandGroup
--    atmRmIfAllStateMIBGroup3
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup2

ciscoAtmRmMIBCompliance12 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 12 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for the Cisco ATM Resource 
--     Management MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup5
--   MandGroup
--    atmRmAllIfCfgMIBGroup5
--   MandGroup
--    atmRmIfAllStateMIBGroup3
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup2
--   MandGroup
--    atmRmTrafficShaperIfGroup

ciscoAtmRmMIBCompliance13 OBJECT IDENTIFIER ::= { ciscoAtmRmMIBCompliances 13 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the Cisco ATM Resource
--     Management MIB.
--  Module
--    >>current<<
--   MandGroup
--    atmRmSwitchCfgMIBGroup2
--   MandGroup
--    atmRmPhyIfCfgMIBGroup5
--   MandGroup
--    atmRmAllIfCfgMIBGroup6
--   MandGroup
--    atmRmIfAllStateMIBGroup3
--   MandGroup
--    atmRmIfStatsMIBGroup
--   MandGroup
--    lsPerVcqAtmRmGroup2
--   MandGroup
--    cgrPerVcqAtmRmGroup2
--   MandGroup
--    atmRmTrafficShaperIfGroup
--   MandGroup
--    sharedMemAtmRmSwitchMIBGroup
--   MandGroup
--    sharedMemAtmRmPhyIfMIBGroup


END