ATM-SOFT-PVC-MIB-V1SMI.my

-- MIB created 6/06/100 14:11:48, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

ATM-SOFT-PVC-MIB DEFINITIONS ::= BEGIN

-- From file: "ATM-SOFT-PVC-MIB.my"

IMPORTS
    enterprises
            FROM RFC1155-SMI
    Counter32, Gauge32
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215
    RowStatus, TruthValue, TimeStamp
            FROM SNMPv2-TC-v1
    ifIndex
            FROM IF-MIB
    atmVplVpi, atmVclVpi, atmVclVci
            FROM ATM-MIB;

atmSoftPvcMIB OBJECT IDENTIFIER ::= { atmfSoftPvc 1 }
-- MODULE-IDENTITY
--  LastUpdated
--    9703010000Z
--  OrgName
--    The ATM Forum.
--  ContactInfo
--    The ATM Forum
--    2570 West El Camino Real, Suite 304
--    Mountain View, CA 94040-1313 USA
--    Phone: +1 415-949-6700
--    Fax:  +1 415-949-6705
--    info@atmforum.com
--  Descr
--    ATM Soft PVC MIB
--  RevDate
--    9703010000Z
--  RevDescr
--    Updated version of the Soft PVC MIB released with the
--    PNNI V1.0 Errata and PICS (af-pnni-81.00).
--  RevDate
--    9606210000Z
--  RevDescr
--    Initial version of this MIB module.

atmForum        OBJECT IDENTIFIER ::= { enterprises 353 }
atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 }
atmfSoftPvc     OBJECT IDENTIFIER ::= { atmForumNetworkManagement 5 }
atmSoftPvcMIBObjects OBJECT IDENTIFIER ::= { atmSoftPvcMIB 1 }
atmSoftPvcMIBTraps OBJECT IDENTIFIER ::= { atmSoftPvcMIB 2 }
atmSoftPvcBaseGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBObjects 1 }
atmSoftPvcTraps OBJECT IDENTIFIER ::= { atmSoftPvcMIBTraps 1 }
atmSoftPvcTrapsPrefix OBJECT IDENTIFIER ::= { atmSoftPvcTraps 0 }
atmSoftPvcMIBConformance OBJECT IDENTIFIER ::= { atmSoftPvcMIB 3 }
atmSoftPvcMIBCompliances OBJECT IDENTIFIER ::= { atmSoftPvcMIBConformance 1 }
atmSoftPvcMIBGroups OBJECT IDENTIFIER ::= { atmSoftPvcMIBConformance 2 }

AtmAddr ::= OCTET STRING(SIZE(0 | 8 | 20))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The ATM address used by the network entity.
--    The address types are: no address (0 octets),
--    E.164 (8 octets)and NSAP (20 octets).
--    Note: The E.164 address is encoded in BCD format.

atmSoftPvcCallFailuresTrapEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Allows the generation of traps in response to call
        failures. By default, this object is set to 'false'."
    ::= { atmSoftPvcBaseGroup 1 }

atmSoftPvcCallFailures OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times a series of call attempts has failed to
        establish a Soft PVCC or Soft PVPC. The number of call
        attempts in a series is determined by
        atmSoftPVccRetryThreshold or atmSoftPVpcRetryThreshold,
        respectively."
    ::= { atmSoftPvcBaseGroup 2 }

atmSoftPvcCurrentlyFailingSoftPVccs OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The current number of Soft PVCCs for which there is
        an active row in the atmSoftPVccTable having an
        atmSoftPVccOperStatus with a value other than 'connected'."
    ::= { atmSoftPvcBaseGroup 3 }

atmSoftPvcCurrentlyFailingSoftPVpcs OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The current number of Soft PVPCs for which there is an
        active row in the atmSoftPVpcTable having an 
        atmSoftPVpcOperStatus with a value other than 'connected'."
    ::= { atmSoftPvcBaseGroup 4 }

atmSoftPvcNotificationInterval OBJECT-TYPE
    SYNTAX INTEGER(0..3600)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The minimum interval between the sending
        of atmSoftPvcCallFailuresTrap notifications."
    DEFVAL { 30 }
    ::= { atmSoftPvcBaseGroup 5 }

atmSoftPVccTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtmSoftPVccEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table used to manage Soft
        Permanent Virtual Channel Connections (Soft PVCCs).
        The Soft PVCC table is applicable only to switches."
    ::= { atmSoftPvcMIBObjects 2 }

atmSoftPVccEntry OBJECT-TYPE
    SYNTAX AtmSoftPVccEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry in this table represents a  Soft
        Permanent Virtual Channel Connection (Soft PVCC)
        originating at a switch interface.
        
        A Soft PVCC is a VCC that is:
          - provisioned at the originating (source)
         interface of the connection
          - established by signalling procedures
         across a network to a destination interface.
        
        A row in the atmVclTable must be created,
        defining a VCL on the source interface, prior to
        creating an atmSoftPVccEntry row. The row in the
        atmVclTable must be active prior to activating the
        atmSoftPVccEntry row.
        
        The contents of this table reflect only the
        characteristics unique to a Soft PVCC. The traffic
        parameters are defined in the VCL row for the source
        interface, as specified in the ATOMMIB (RFC1695) and 
        the forthcoming addition, the Supplemental ATOMMIB.
        
        Note that the atmSigDescrParamTable contains some objects
        such as the AAL parameters, Broadband high layer
        information and Broadband low layer information
        elements which are used to carry end-to-end information.
        For this reason, these objects are not relevant to Soft
        PVCCs.
        
        When a row is made active, an attempt is made
        to set up a switched connection to an interface at
        the destination switch. No objects (other than
        atmSoftPVccRowStatus) can be set while the row is 
        active.
        
        At the destination, the VCL may be defined (but 
        not cross-connected) prior to arrival of the Setup 
        request.
        
        The combination of ifIndex, atmVclVpi, and atmVclVci
        specified in the index clause of this entry serves to
        identify the VCL on the source interface. The
        atmSoftPVccLeafReference object aids in distinguishing
        between leaves of a point-to-multipoint Soft PVCC."
    INDEX { ifIndex, atmVclVpi, atmVclVci, atmSoftPVccLeafReference }
    ::= { atmSoftPVccTable 1 }

AtmSoftPVccEntry ::= SEQUENCE {
    atmSoftPVccLeafReference INTEGER,
    atmSoftPVccTargetAddress AtmAddr,
    atmSoftPVccTargetSelectType INTEGER,
    atmSoftPVccTargetVpi INTEGER,
    atmSoftPVccTargetVci INTEGER,
    atmSoftPVccLastReleaseCause INTEGER,
    atmSoftPVccLastReleaseDiagnostic OCTET STRING,
    atmSoftPVccOperStatus INTEGER,
    atmSoftPVccRestart INTEGER,
    atmSoftPVccRetryInterval INTEGER,
    atmSoftPVccRetryTimer INTEGER,
    atmSoftPVccRetryThreshold INTEGER,
    atmSoftPVccRetryFailures Gauge32,
    atmSoftPVccRetryLimit INTEGER,
    atmSoftPVccRowStatus RowStatus
    }

atmSoftPVccLeafReference OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An arbitrary integer which, in the case of the
        source VCL having an atmVclCastType of
        'p2mpRoot', serves to distinguish between the 
        multiple leaves attached to a root of a 
        point-to-multipoint Soft PVCC. If the atmVclCastType 
        is not 'p2mpRoot' the value 1 shall be used."
    ::= { atmSoftPVccEntry 1 }

atmSoftPVccTargetAddress OBJECT-TYPE
    SYNTAX AtmAddr
--    Rsyntax OCTET STRING(SIZE(0 | 8 | 20))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The target ATM Address of this Soft PVCC.  If no
                      address is supplied, no attempts to establish the
                      Soft PVCC are initiated."
    ::= { atmSoftPVccEntry 2 }

atmSoftPVccTargetSelectType OBJECT-TYPE
    SYNTAX INTEGER {
        required(1),
        any(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the target VPI/VCI values
        are to be used at the destination.
        
        If the value 'any' is specified, the destination
        switch will choose the VPI/VCI values. In such a
        case, once the Soft PVCC atmSoftPVccOperStatus
        value is 'connected', the value of this object
        changes to 'required', such that the same VPI/VCI
        values will continue to be used even if the connection
        is subsequently torn down and re-established. The
        VPI/VCI values chosen will be available for reading in 
        atmSoftPVccTargetVpi and atmSoftPVccTargetVci.
        
        If the value 'required' is specified, then values
        must be supplied for objects atmSoftPVccTargetVpi
        and atmSoftPVccTargetVci prior to activation of the
        row. These values are then to be used at the destination."
    DEFVAL { required }
    ::= { atmSoftPVccEntry 3 }

atmSoftPVccTargetVpi OBJECT-TYPE
    SYNTAX INTEGER(0..4095)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VPI value of the VCL used at the target interface.
        This value is not relevant when the value of 
        atmSoftPVccTargetSelectType is 'any'."
    DEFVAL { 0 }
    ::= { atmSoftPVccEntry 4 }

atmSoftPVccTargetVci OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VCI value of the VCL used at the target interface.
        This value must be filled in when the
        atmSoftPVccTargetSelectType is set to 'required'.This 
        value is not relevant when the value of 
        atmSoftPVccTargetSelectType is 'any'."
    ::= { atmSoftPVccEntry 5 }

atmSoftPVccLastReleaseCause OBJECT-TYPE
    SYNTAX INTEGER(1..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Value of the Cause field of the Cause
        Information Element in the last RELEASE
        signalling message received for this Soft PVCC.
        Indicates the reason for the Release."
    ::= { atmSoftPVccEntry 6 }

atmSoftPVccLastReleaseDiagnostic OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(0..8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Value of the first 8 bytes of diagnostic information
        from the Cause field of the Cause Information Element
        in the last RELEASE signalling message received for
        this Soft PVCC."
    ::= { atmSoftPVccEntry 7 }

atmSoftPVccOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        establishmentInProgress(2),
        connected(3),
        retriesExhausted(4),
        noAddressSupplied(5),
        lowerLayerDown(6)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Describes the status of the Soft PVCC.  Valid values
                      are:
                         other              - none of the types specified below
                         establishmentInProgress - connection or party is not
                                                   operational, but setup or add
                                                   party attempts are ongoing
                         connected          - connection or party is currently
                                              operational
                         retriesExhausted   - retry limit has been reached and
                                              setup or add party attempts have
                                              ceased
                         noAddressSupplied  - no remote address has been
                                              configured, so no setup or add
                                              party attempts are initiated
                         lowerLayerDown     - underlying ATM interface is not
                                              operational
                      When the row is not 'active', the value of this
        object is 'other'."
    ::= { atmSoftPVccEntry 8 }

atmSoftPVccRestart OBJECT-TYPE
    SYNTAX INTEGER {
        restart(1),
        noop(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When the value is set to 'restart' the Soft PVCC
        is released if necessary and a new setup procedure
        is begun. As a result of this action, the
        atmSoftPVccOperStatus object transitions to
        'establishmentInProgress' (if not already in this state)
        and the atmSoftPVccRetryFailures object is cleared
        
        When the value is set to 'noop' no operation is
        performed. When read, the value 'noop' is returned."
    ::= { atmSoftPVccEntry 9 }

atmSoftPVccRetryInterval OBJECT-TYPE
    SYNTAX INTEGER(0..3600)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Defines the period to wait before attempting
        to establish the Soft PVCC after the first failed call
        attempt.  The time to wait between subsequent call
                      attempts may differ to implement a backoff scheme.
                      Zero represents an infinite interval indicating no
        retries."
    DEFVAL { 10 }
    ::= { atmSoftPVccEntry 10 }

atmSoftPVccRetryTimer OBJECT-TYPE
    SYNTAX INTEGER(0..86400)
--  Units
--    seconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current value of the retry timer for
        this connection. When the value reaches zero an attempt
        will be made to establish the Soft PVCC. When the timer
        is not running, the value zero shall be returned."
    ::= { atmSoftPVccEntry 11 }

atmSoftPVccRetryThreshold OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of consecutive call setup attempts for
        the same Soft PVCC which need to fail before the
        atmSoftPvcCallFailures object is incremented. A value of
        zero indicates that an infinite number of call attempts
        are required to increment the atmSoftPvcCallFailures object
        and thus disables alarms for the Soft PVCC."
    DEFVAL { 1 }
    ::= { atmSoftPVccEntry 12 }

atmSoftPVccRetryFailures OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates how many attempts to establish the connection
        have failed.  This count is reset whenever a connection
        is successfully established or the Soft PVCC is restarted."
    ::= { atmSoftPVccEntry 13 }

atmSoftPVccRetryLimit OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Sets a maximum limit on how many consecutive unsuccessful
        call setup attempts can be made before stopping the attempt
        to set up the connection. If this limit is reached then
        management action will be required (e.g. setting 
        atmSoftPVccRestart to 'restart') to initiate a new attempt
        to establish the connection. A value of zero indicates
        no limit - the attempts will continue until successful."
    DEFVAL { 0 }
    ::= { atmSoftPVccEntry 14 }

atmSoftPVccRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Used to create and delete a Soft PVCC. When this
        object is set to 'active' an attempt is made to
        set up the Soft PVCC. When this object has the value
        'active' and is set to another value, any
        set-up or connection in-progress is released."
    ::= { atmSoftPVccEntry 15 }

atmSoftPVpcTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtmSoftPVpcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table used to manage Soft
        Permanent Virtual Path Connections (Soft PVPCs)
        The Soft PVPC table is applicable only to switches."
    ::= { atmSoftPvcMIBObjects 3 }

atmSoftPVpcEntry OBJECT-TYPE
    SYNTAX AtmSoftPVpcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry in this table represents a  Soft
        Permanent Virtual Path Connection (Soft PVPC)
        originating at a switch interface.
        
        A Soft PVPC is a VPC that is:
          - provisioned at the originating (source)
         interface of the connection
          - established by signalling procedures
         across a network to a destination interface.
        
        A row in the atmVplTable must be created,
        defining a VPL on the source interface, prior to
        creating an atmSoftPVpcEntry row. The row in the
        atmVplTable must be active prior to activating the
        atmSoftPVpcEntry row.
        
        The contents of this table reflect only the
        characteristics unique to a Soft PVPC. The traffic
        parameters are defined in the VPL row for the source
        interface, as specified in the ATOMMIB (RFC1695) and
        the forthcoming addition, the Supplemental ATOMMIB.
        
        Note that the atmSigDescrParamTable contains some
        objects such as the AAL parameters, Broadband high
        layer information, and Broadband low layer information
        elements which are used to carry end-to-end information.
        For this reason, these objects are not relevant to Soft
        PVPCs.
        
        When a row is made active, an attempt is made
        to set up a switched connection to an interface at
        the destination switch. No objects (other than
        atmSoftPVpcRowStatus) can be set while the row is
        active.
        
        At the destination, the VPL may be defined (but
        not cross-connected) prior to arrival of the Setup
        request.
        
        The combination of ifIndex, atmVplVpi specified
        in the index clause of this entry serves to
        identify the VPL on the source interface. The
        atmSoftPVpcLeafReference object aids in distinguishing
        between leaves of a point-to-multipoint Soft PVPC."
    INDEX { ifIndex, atmVplVpi, atmSoftPVpcLeafReference }
    ::= { atmSoftPVpcTable 1 }

AtmSoftPVpcEntry ::= SEQUENCE {
    atmSoftPVpcLeafReference INTEGER,
    atmSoftPVpcTargetAddress AtmAddr,
    atmSoftPVpcTargetSelectType INTEGER,
    atmSoftPVpcTargetVpi INTEGER,
    atmSoftPVpcLastReleaseCause INTEGER,
    atmSoftPVpcLastReleaseDiagnostic OCTET STRING,
    atmSoftPVpcOperStatus INTEGER,
    atmSoftPVpcRestart INTEGER,
    atmSoftPVpcRetryInterval INTEGER,
    atmSoftPVpcRetryTimer INTEGER,
    atmSoftPVpcRetryThreshold INTEGER,
    atmSoftPVpcRetryFailures Gauge32,
    atmSoftPVpcRetryLimit INTEGER,
    atmSoftPVpcRowStatus RowStatus
    }

atmSoftPVpcLeafReference OBJECT-TYPE
    SYNTAX INTEGER(1..63535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An arbitrary integer which, in the case of the
        source VPL having a atmVplCastType of
        'p2mpRoot', serves to distinguish between the
        multiple leaves attached to a root of a
        point-to-multipoint Soft PVPC.
        
        If the atmVplCastType is not 'p2mpRoot', the
        value 1 shall be used."
    ::= { atmSoftPVpcEntry 1 }

atmSoftPVpcTargetAddress OBJECT-TYPE
    SYNTAX AtmAddr
--    Rsyntax OCTET STRING(SIZE(0 | 8 | 20))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The target ATM Address of this Soft PVPC.  If no
                      address is supplied, no attempts to establish the
                      Soft PVPC are initiated."
    ::= { atmSoftPVpcEntry 2 }

atmSoftPVpcTargetSelectType OBJECT-TYPE
    SYNTAX INTEGER {
        required(1),
        any(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the target VPI value
        is to be used at the destination.
        If the value 'any' is specified, the
        destination switch will choose the VPI
        value. In such a case, once the Soft PVPC
        atmSoftPVpcOperStatus value is 'connected',
        the value of this object changes to 'required',
        such that the same VPI value will continue to
        be used even if the connection is subsequently
        torn down and re-established. The VPI value
        chosen will be available for reading in
        atmSoftPVpcTargetVpi.
        
        If the value 'required' is specified, then
        a value must be supplied for object
        atmSoftPVpcTargetVpi prior to activation
        of the row. This value is then to be used
        at the destination."
    DEFVAL { required }
    ::= { atmSoftPVpcEntry 3 }

atmSoftPVpcTargetVpi OBJECT-TYPE
    SYNTAX INTEGER(0..4095)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VPI value of the VPL used at the
        target interface.
        
        This value must be filled in when the
        atmSoftPVpcTargetSelectType is set to 'required'.
        This value is not relevant when the value of
        atmSoftPVpcTargetSelectType is 'any'."
    ::= { atmSoftPVpcEntry 4 }

atmSoftPVpcLastReleaseCause OBJECT-TYPE
    SYNTAX INTEGER(1..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Value of the Cause field of the Cause
        Information Element in the last RELEASE
        signalling message received for this Soft PVPC.
        Indicates the reason for the Release."
    ::= { atmSoftPVpcEntry 5 }

atmSoftPVpcLastReleaseDiagnostic OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(0..8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Value of the first 8 bytes of diagnostic information
        from the Cause field of the Cause Information Element
        in the last RELEASE signalling message received for
        this Soft PVPC."
    ::= { atmSoftPVpcEntry 6 }

atmSoftPVpcOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        establishmentInProgress(2),
        connected(3),
        retriesExhausted(4),
        noAddressSupplied(5),
        lowerLayerDown(6)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Describes the status of the Soft PVPC. 
                    other              - none of the types specified below
                    establishmentInProgress - connection or party is not
                                              operational, but setup or add
                                              party attempts are ongoing
                    connected          - connection or party is currently
                                         operational
                    retriesExhausted   - retry limit has been reached and
                                         setup or add party attempts have
                                         ceased
                    noAddressSupplied  - no remote address has been
                                         configured, so no setup or add
                                         party attempts are initiated
                    lowerLayerDown     - underlying ATM interface is not
                                         operational
                 When the row is not 'active', the value of this
        object is 'other'."
    ::= { atmSoftPVpcEntry 7 }

atmSoftPVpcRestart OBJECT-TYPE
    SYNTAX INTEGER {
        restart(1),
        noop(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When the value is set to 'restart', the Soft PVPC is
        released if necessary and a new setup procedure is begun.
        As a result of this action, the atmSoftPVpcOperStatus
        object transitions to 'establishmentInProgress' (if not
        already in this state) and the atmSoftPVpcRetryFailures
        object is cleared.
        
        When the value is set to 'noop', no operation is performed.
        When read, the value 'noop' is returned."
    ::= { atmSoftPVpcEntry 8 }

atmSoftPVpcRetryInterval OBJECT-TYPE
    SYNTAX INTEGER(0..3600)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Defines the period to wait before attempting
        to establish the Soft PVPC after the first failed 
                      call attempt.  The time to wait between subsequent
                      call attempts may differ to implement a backoff scheme.
                      Zero represents an infinite interval indicating no 
                      retries."
    DEFVAL { 10 }
    ::= { atmSoftPVpcEntry 9 }

atmSoftPVpcRetryTimer OBJECT-TYPE
    SYNTAX INTEGER(0..86400)
--  Units
--    seconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the current value of the retry timer for
        this connection. When the value reaches zero an attempt
        will be made to establish the Soft PVPC. When the
        timer is not running, the value zero shall be returned."
    ::= { atmSoftPVpcEntry 10 }

atmSoftPVpcRetryThreshold OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the number of consecutive call setup attempts for
        the same Soft PVPC which need to fail before the
        atmSoftPvcCallFailures object is incremented. A value of
        zero indicates that an infinite number of call attempts
        are required to increment the atmSoftPvcCallFailures object
        and thus disables alarms for the Soft PVPC."
    DEFVAL { 1 }
    ::= { atmSoftPVpcEntry 11 }

atmSoftPVpcRetryFailures OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates how many attempts to establish the connection
        have failed.  This count is reset whenever a connection
        is successfully established or the Soft PVPC is restarted."
    ::= { atmSoftPVpcEntry 12 }

atmSoftPVpcRetryLimit OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Sets a maximum limit on how many consecutive unsuccessful
        call setup attempts can be made before stopping the attempt
        to set up the connection. If this limit is reached then
        management action will be required (e.g. setting
        atmSoftPVpcRestart to 'restart') to initiate a new attempt
        to establish the connection. A value of zero indicates no
        limit - the attempts will continue until successful."
    DEFVAL { 0 }
    ::= { atmSoftPVpcEntry 13 }

atmSoftPVpcRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Used to create and delete a Soft PVPC. When this
        object is set to 'active' an attempt is made to
        set up the Soft PVPC. When this object has the value
        'active' and is set to another value, any
        set-up or connection in-progress is released."
    ::= { atmSoftPVpcEntry 14 }

atmInterfaceSoftPvcAddressTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtmInterfaceSoftPvcAddressEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is used to configure ATM addresses at 
        an ATM interface on this node prior to setting up
        Soft PVPCs or Soft PVPCs at that interface."
    ::= { atmSoftPvcMIBObjects 4 }

atmInterfaceSoftPvcAddressEntry OBJECT-TYPE
    SYNTAX AtmInterfaceSoftPvcAddressEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "ATM address entry for configuring Soft PVCCs or
        Soft PVPCs at an ATM interface."
    INDEX { ifIndex, atmInterfaceSoftPvcAddress }
    ::= { atmInterfaceSoftPvcAddressTable 1 }

AtmInterfaceSoftPvcAddressEntry ::= SEQUENCE {
    atmInterfaceSoftPvcAddress AtmAddr,
    atmInterfaceSoftPvcAddressRowStatus RowStatus
    }

atmInterfaceSoftPvcAddress OBJECT-TYPE
    SYNTAX AtmAddr
--    Rsyntax OCTET STRING(SIZE(0 | 8 | 20))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Specifies the address that can be used to establish a Soft
        PVCC or Soft PVPC to this interface."
    ::= { atmInterfaceSoftPvcAddressEntry 1 }

atmInterfaceSoftPvcAddressRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Used to create and delete an ATM address at this interface
        for setting up Soft PVCCs or Soft PVPCs."
    ::= { atmInterfaceSoftPvcAddressEntry 2 }

atmCurrentlyFailingSoftPVccTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtmCurrentlyFailingSoftPVccEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table indicating all Soft Permanent Virtual Channel
        Connections (Soft PVCCs) for which the atmSoftPVccRowStatus
        is 'active' and the atmSoftPVccOperStatus is other than
        'connected'."
    ::= { atmSoftPvcMIBObjects 5 }

atmCurrentlyFailingSoftPVccEntry OBJECT-TYPE
    SYNTAX AtmCurrentlyFailingSoftPVccEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry in this table represents a Soft Permanent
        Virtual Channel Connection (Soft PVCC) for which the
        atmSoftPVccRowStatus is 'active' and the 
        atmSoftPVccOperStatus is other than 'connected'."
    INDEX { ifIndex, atmVclVpi, atmVclVci, atmSoftPVccLeafReference }
    ::= { atmCurrentlyFailingSoftPVccTable 1 }

AtmCurrentlyFailingSoftPVccEntry ::= SEQUENCE {
    atmCurrentlyFailingSoftPVccTimeStamp TimeStamp
    }

atmCurrentlyFailingSoftPVccTimeStamp OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The time at which this Soft PVCC began to fail."
    ::= { atmCurrentlyFailingSoftPVccEntry 1 }

atmCurrentlyFailingSoftPVpcTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtmCurrentlyFailingSoftPVpcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table indicating all Soft Permanent Virtual Path
        Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus
        is 'active' and the atmSoftPVpcOperStatus is other than
        'connected'."
    ::= { atmSoftPvcMIBObjects 6 }

atmCurrentlyFailingSoftPVpcEntry OBJECT-TYPE
    SYNTAX AtmCurrentlyFailingSoftPVpcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry in this table represents a Soft Permanent
        Virtual Path Connection (Soft PVPC) for which the
        atmSoftPVpcRowStatus is 'active' and the 
        atmSoftPVpcOperStatus is other than 'connected'."
    INDEX { ifIndex, atmVclVpi, atmSoftPVpcLeafReference }
    ::= { atmCurrentlyFailingSoftPVpcTable 1 }

AtmCurrentlyFailingSoftPVpcEntry ::= SEQUENCE {
    atmCurrentlyFailingSoftPVpcTimeStamp TimeStamp
    }

atmCurrentlyFailingSoftPVpcTimeStamp OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The time at which this Soft PVPC began to fail."
    ::= { atmCurrentlyFailingSoftPVpcEntry 1 }

atmSoftPvcCallFailuresTrap TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE atmSoftPvcTraps
    VARIABLES {
        atmSoftPvcCallFailures, atmSoftPvcCurrentlyFailingSoftPVccs, 
        atmSoftPvcCurrentlyFailingSoftPVpcs }
--  Status
--    mandatory
    DESCRIPTION
        "A notification indicating that one or more series of
        call attempts in trying to establish a Soft PVPC or
        Soft PVCC have failed since the last
        atmSoftPvcCallFailureTrap was sent. If this trap has
        not been sent for the last atmSoftPvcNotificationInterval,
        then it will be sent on the next increment of
        atmSoftPvcCallFailures."
    ::= 1

atmSoftPvcBaseMIBGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects to related to failing
--    Soft PVCCs and Soft PVPCs.
--  objects
--    atmSoftPvcCallFailuresTrapEnable, atmSoftPvcCallFailures, 
--    atmSoftPvcCurrentlyFailingSoftPVccs, 
--    atmSoftPvcCurrentlyFailingSoftPVpcs, 
--    atmSoftPvcNotificationInterval

atmSoftPvcVccMIBGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects managing Soft PVCCs.
--  objects
--    atmSoftPVccTargetAddress, atmSoftPVccTargetSelectType, 
--    atmSoftPVccTargetVpi, atmSoftPVccTargetVci, 
--    atmSoftPVccLastReleaseCause, atmSoftPVccLastReleaseDiagnostic, 
--    atmSoftPVccOperStatus, atmSoftPVccRestart, 
--    atmSoftPVccRetryInterval, atmSoftPVccRetryTimer, 
--    atmSoftPVccRetryThreshold, atmSoftPVccRetryFailures, 
--    atmSoftPVccRetryLimit, atmSoftPVccRowStatus

atmSoftPvcVpcMIBGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects managing Soft PVPCs.
--  objects
--    atmSoftPVpcTargetAddress, atmSoftPVpcTargetSelectType, 
--    atmSoftPVpcTargetVpi, atmSoftPVpcLastReleaseCause, 
--    atmSoftPVpcLastReleaseDiagnostic, atmSoftPVpcOperStatus, 
--    atmSoftPVpcRestart, atmSoftPVpcRetryInterval, 
--    atmSoftPVpcRetryTimer, atmSoftPVpcRetryThreshold, 
--    atmSoftPVpcRetryFailures, atmSoftPVpcRetryLimit, 
--    atmSoftPVpcRowStatus

atmSoftPvcAddressMIBGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects managing interfaces addresses for
--    Soft PVCCs and Soft PVPCs.
--  objects
--    atmInterfaceSoftPvcAddressRowStatus

atmCurrentlyFailingSoftPVccMIBGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for management of currently
--    failing Soft PVCCs.
--  objects
--    atmCurrentlyFailingSoftPVccTimeStamp

atmCurrentlyFailingSoftPVpcMIBGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for management of currently
--    failing Soft PVPCs.
--  objects
--    atmCurrentlyFailingSoftPVpcTimeStamp

atmSoftPvcMIBCompliance OBJECT IDENTIFIER ::= { atmSoftPvcMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the ATM Soft PVC group.
--  Module
--    >>current<<
--   MandGroup
--    atmSoftPvcBaseMIBGroup
--   MandGroup
--    atmSoftPvcVccMIBGroup
--   MandGroup
--    atmSoftPvcAddressMIBGroup
--   ObjVar
--    atmSoftPVccRetryLimit
--   OptGroup
--    atmSoftPvcVpcMIBGroup
--   ObjVar
--    atmSoftPVpcRetryLimit


END