ALTIGA-PPTP-STATS-MIB-V1SMI.my

-- MIB file created 04-Dec-2002 15:42:14, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

ALTIGA-PPTP-STATS-MIB DEFINITIONS ::= BEGIN

-- From file: "ALTIGA-PPTP-STATS-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    RowStatus, DisplayString, TruthValue
            FROM SNMPv2-TC-v1
    alStatsPptp, alPptpGroup
            FROM ALTIGA-MIB
    alPptpMibModule
            FROM ALTIGA-GLOBAL-REG
    Counter, Gauge, IpAddress
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

altigaPptpStatsMibModule OBJECT IDENTIFIER ::= { alPptpMibModule 2 }
-- MODULE-IDENTITY
--  LastUpdated
--    200209051300Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems 
--     170 W Tasman Drive 
--     San Jose, CA  95134 
--     USA 
--    
--     Tel: +1 800 553-NETS 
--     E-mail: cs-cvpn3000@cisco.com
--  Descr
--    The Altiga PPTP Statistics MIB models counters and objects that are 
--     of management interest for PPTP tunnels. 
--     
--     Acronyms 
--     The following acronyms are used in this document: 
--    
--       MIB:        Management Information Base 
--    
--       PPTP:       Point-to-Point Tunneling Protocol 
--    
--  RevDate
--    200209051300Z
--  RevDescr
--    Added module compliance.
--  RevDate
--    200207100000Z
--  RevDescr
--    Updated with new header

alStatsPptpGlobal OBJECT IDENTIFIER ::= { alStatsPptp 1 }
altigaPptpStatsMibConformance OBJECT IDENTIFIER ::= { altigaPptpStatsMibModule 1 }
altigaPptpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaPptpStatsMibConformance 1 }

alPptpStatsLocalProtVers OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(2))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object describes the protocol version and 
              revision of the local implementation. The 
              first octet contains the protocol version. The 
              second octet contains the protocol revision."
    ::= { alStatsPptpGlobal 1 }

alPptpStatsLocalFraming OBJECT-TYPE
    SYNTAX INTEGER(0..3)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A set of bits indicating the PPTP framing capabilities 
        of this system."
    ::= { alStatsPptpGlobal 2 }

alPptpStatsLocalBearer OBJECT-TYPE
    SYNTAX INTEGER(0..3)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A set of bits indicating the PPTP bearer capabilities 
        of this system."
    ::= { alStatsPptpGlobal 3 }

alPptpStatsLocalFirmwareRev OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(2))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object defines the local firmware revision."
    ::= { alStatsPptpGlobal 4 }

alPptpStatsTotalTunnels OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of tunnels, 
        including those that did not reach the established 
        state."
    ::= { alStatsPptpGlobal 5 }

alPptpStatsActiveTunnels OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of tunnels that 
              are currently active."
    ::= { alStatsPptpGlobal 6 }

alPptpStatsMaxTunnels OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of simultaneously active PPTP tunnels 
         since the system was booted."
    ::= { alStatsPptpGlobal 7 }

alPptpStatsTotalSessions OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of sessions, 
        including those that did not reach the established 
        state."
    ::= { alStatsPptpGlobal 8 }

alPptpStatsActiveSessions OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of sessions that 
              are currently active."
    ::= { alStatsPptpGlobal 9 }

alPptpStatsMaxSessions OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of simultaneously active PPTP sessions 
         since the system was booted."
    ::= { alStatsPptpGlobal 10 }

alPptpStatsControlRecvOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of control channel 
         octets received."
    ::= { alStatsPptpGlobal 11 }

alPptpStatsControlRecvPackets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of control packets 
         received."
    ::= { alStatsPptpGlobal 12 }

alPptpStatsControlRecvDiscards OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of control packets 
         received that were discarded."
    ::= { alStatsPptpGlobal 13 }

alPptpStatsControlSendOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of control channel 
         octets that were transmitted to tunnel endpoints."
    ::= { alStatsPptpGlobal 14 }

alPptpStatsControlSendPackets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of control packets 
         that were transmitted to tunnel endpoints."
    ::= { alStatsPptpGlobal 15 }

alPptpStatsPayloadRecvOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of payload channel 
         octets that were received."
    ::= { alStatsPptpGlobal 16 }

alPptpStatsPayloadRecvPackets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of payload packets 
         that were received."
    ::= { alStatsPptpGlobal 17 }

alPptpStatsPayloadRecvDiscards OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of received payload 
         packets that were discarded."
    ::= { alStatsPptpGlobal 18 }

alPptpStatsPayloadSendOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of payload channel 
         octets that were transmitted to tunnel peers."
    ::= { alStatsPptpGlobal 19 }

alPptpStatsPayloadSendPackets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the number of payload packets 
         that were transmitted to tunnel peers."
    ::= { alStatsPptpGlobal 20 }

alPptpStatsTunnelTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AlPptpStatsTunnelEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The PPTP tunnel status and statistics table."
    ::= { alStatsPptp 2 }

alPptpStatsTunnelEntry OBJECT-TYPE
    SYNTAX AlPptpStatsTunnelEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the alPptpStatsTunnelTable."
    INDEX { alPptpStatsTunnelPeerIpAddr }
    ::= { alPptpStatsTunnelTable 1 }

AlPptpStatsTunnelEntry ::= SEQUENCE {
    alPptpStatsTunnelRowStatus RowStatus,
    alPptpStatsTunnelPeerIpAddr IpAddress,
    alPptpStatsTunnelDatastreamId INTEGER,
    alPptpStatsTunnelLocalIpAddr IpAddress,
    alPptpStatsTunnelPeerHostName DisplayString,
    alPptpStatsTunnelPeerVendorName DisplayString,
    alPptpStatsTunnelPeerFirmwareRev OCTET STRING,
    alPptpStatsTunnelPeerProtVers OCTET STRING,
    alPptpStatsTunnelPeerFramingCap INTEGER,
    alPptpStatsTunnelPeerBearerCap INTEGER,
    alPptpStatsTunnelPeerMaxChan INTEGER,
    alPptpStatsTunnelActiveSessions Counter
    }

alPptpStatsTunnelRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this row. Used to terminate the tunnel, 
        cannot be used to create a tunnel."
    ::= { alPptpStatsTunnelEntry 1 }

alPptpStatsTunnelPeerIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The peer's IP address for this tunnel."
    ::= { alPptpStatsTunnelEntry 2 }

alPptpStatsTunnelDatastreamId OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The IP-GRE datastream ID of this tunnel."
    ::= { alPptpStatsTunnelEntry 3 }

alPptpStatsTunnelLocalIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The local IP address for this tunnel."
    ::= { alPptpStatsTunnelEntry 4 }

alPptpStatsTunnelPeerHostName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The peer's host name, as indicated by the peer in a 
        Start-Control-Connection packet."
    ::= { alPptpStatsTunnelEntry 5 }

alPptpStatsTunnelPeerVendorName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The peer's vendor name, as indicated by the peer in a 
        Start-Control-Connection packet."
    ::= { alPptpStatsTunnelEntry 6 }

alPptpStatsTunnelPeerFirmwareRev OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(2))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object contains the tunnel peer's firmware 
         revision number. If the tunnel is idle this object 
         should maintain its value from the last time it 
         was connected."
    ::= { alPptpStatsTunnelEntry 7 }

alPptpStatsTunnelPeerProtVers OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(2))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object describes the protocol version and 
              revision of the tunnel peers implementation. The 
              first octet contains the protocol version. The 
              second octet contains the protocol revision."
    ::= { alPptpStatsTunnelEntry 8 }

alPptpStatsTunnelPeerFramingCap OBJECT-TYPE
    SYNTAX INTEGER(0..3)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object describes the Framing Capabilities of 
              the tunnel peer. If the tunnel is idle this object 
              should maintain its value from the last time it was 
              connected."
    ::= { alPptpStatsTunnelEntry 9 }

alPptpStatsTunnelPeerBearerCap OBJECT-TYPE
    SYNTAX INTEGER(0..3)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object describes the Bearer Capabilities of 
              the tunnel peer. If the tunnel is idle this object 
              should maintain its value from the last time it was 
              connected."
    ::= { alPptpStatsTunnelEntry 10 }

alPptpStatsTunnelPeerMaxChan OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The peer's maximum channels value, as indicated by  
        the peer in a Start-Control-Connection packet."
    ::= { alPptpStatsTunnelEntry 11 }

alPptpStatsTunnelActiveSessions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object contains the total number of sessions 
              for this tunnel."
    ::= { alPptpStatsTunnelEntry 12 }

alPptpStatsSessionTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AlPptpStatsSessionEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "List of active sessions within tunnels."
    ::= { alStatsPptp 3 }

alPptpStatsSessionEntry OBJECT-TYPE
    SYNTAX AlPptpStatsSessionEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the alPptpStatsSessionTable."
    INDEX { alPptpStatsSessionDatastreamId }
    ::= { alPptpStatsSessionTable 1 }

AlPptpStatsSessionEntry ::= SEQUENCE {
    alPptpStatsSessionRowStatus RowStatus,
    alPptpStatsSessionDatastreamId INTEGER,
    alPptpStatsSessionLocalCallId INTEGER,
    alPptpStatsSessionPeerCallId INTEGER,
    alPptpStatsSessionUserName DisplayString,
    alPptpStatsSessionSerial INTEGER,
    alPptpStatsSessionMinimumSpeed INTEGER,
    alPptpStatsSessionMaximumSpeed INTEGER,
    alPptpStatsSessionConnectSpeed INTEGER,
    alPptpStatsSessionBearerType INTEGER,
    alPptpStatsSessionFramingType INTEGER,
    alPptpStatsSessionPhysicalChannel INTEGER,
    alPptpStatsSessionLocalWindowSize INTEGER,
    alPptpStatsSessionPeerWindowSize INTEGER,
    alPptpStatsSessionLocalPpd INTEGER,
    alPptpStatsSessionPeerPpd INTEGER,
    alPptpStatsSessionRecvOctets Counter,
    alPptpStatsSessionRecvPackets Counter,
    alPptpStatsSessionRecvDiscards Counter,
    alPptpStatsSessionRecvZLB Counter,
    alPptpStatsSessionSendOctets Counter,
    alPptpStatsSessionSendPackets Counter,
    alPptpStatsSessionSendZLB Counter,
    alPptpStatsSessionAckTimeouts Counter,
    alPptpStatsSessionLocalFlowOff TruthValue,
    alPptpStatsSessionPeerFlowOff TruthValue,
    alPptpStatsSessionOutOfWindow Counter,
    alPptpStatsSessionOutOfSequence Counter,
    alPptpStatsSessionTunnelPeerIpAddr IpAddress
    }

alPptpStatsSessionRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this row. Used to terminate the session, 
        cannot be used to create a Session."
    ::= { alPptpStatsSessionEntry 1 }

alPptpStatsSessionDatastreamId OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The GRE-PPP datastream ID of this tunnel, used as the 
         index for this row."
    ::= { alPptpStatsSessionEntry 2 }

alPptpStatsSessionLocalCallId OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The local call ID within the tunnel of the session  
        represented by this row."
    ::= { alPptpStatsSessionEntry 3 }

alPptpStatsSessionPeerCallId OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The peer call ID within the tunnel of the session 
        represented by this row."
    ::= { alPptpStatsSessionEntry 4 }

alPptpStatsSessionUserName OBJECT-TYPE
    SYNTAX DisplayString
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the peer session name on 
         this interface. This is typically the login name 
         of the remote user. If the user name is unknown to 
         the local tunnel peer then this object will contain 
         a null string."
    ::= { alPptpStatsSessionEntry 5 }

alPptpStatsSessionSerial OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The call serial number within the tunnel of the session 
        represented by this row."
    ::= { alPptpStatsSessionEntry 6 }

alPptpStatsSessionMinimumSpeed OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The lowest acceptable line speed (in bits/second)  
        for this session, as indicated in the Call-Request  
        packet."
    ::= { alPptpStatsSessionEntry 7 }

alPptpStatsSessionMaximumSpeed OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The highest acceptable line speed (in bits/second)  
        for this session, as indicated in the Call-Request  
        packet."
    ::= { alPptpStatsSessionEntry 8 }

alPptpStatsSessionConnectSpeed OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The actual line speed (in bits/second) for this session."
    ::= { alPptpStatsSessionEntry 9 }

alPptpStatsSessionBearerType OBJECT-TYPE
    SYNTAX INTEGER {
        analog(1),
        digital(2),
        any(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A value indicating the bearer capability required for 
        this session."
    ::= { alPptpStatsSessionEntry 10 }

alPptpStatsSessionFramingType OBJECT-TYPE
    SYNTAX INTEGER {
        asynchronous(1),
        synchronous(2),
        either(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A value indicating the framing capability required for 
        this session."
    ::= { alPptpStatsSessionEntry 11 }

alPptpStatsSessionPhysicalChannel OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The physical channel number used for this session."
    ::= { alPptpStatsSessionEntry 12 }

alPptpStatsSessionLocalWindowSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of received data packets this system will 
        buffer for this session, as indicated in the setup packets 
        for this session."
    ::= { alPptpStatsSessionEntry 13 }

alPptpStatsSessionPeerWindowSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of received data packets the peer will 
        buffer for this session, as indicated in the setup packets 
        for this session."
    ::= { alPptpStatsSessionEntry 14 }

alPptpStatsSessionLocalPpd OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A measure of the packet processing delay that might be 
        imposed on data sent to this system, in units of 1/10 
        seconds."
    ::= { alPptpStatsSessionEntry 15 }

alPptpStatsSessionPeerPpd OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A measure of the packet processing delay that might be 
        imposed on data sent to the peer, in units of 1/10 
        seconds."
    ::= { alPptpStatsSessionEntry 16 }

alPptpStatsSessionRecvOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number payload octets 
         received for this session."
    ::= { alPptpStatsSessionEntry 17 }

alPptpStatsSessionRecvPackets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of payload packets 
         received for this session."
    ::= { alPptpStatsSessionEntry 18 }

alPptpStatsSessionRecvDiscards OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of payload packets 
         received that were discarded for this session."
    ::= { alPptpStatsSessionEntry 19 }

alPptpStatsSessionRecvZLB OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of Zero Length 
         Body acknowlegement payload packets received for 
         this session."
    ::= { alPptpStatsSessionEntry 20 }

alPptpStatsSessionSendOctets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of payload octets 
         transmitted for this session."
    ::= { alPptpStatsSessionEntry 21 }

alPptpStatsSessionSendPackets OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of payload packets 
         transmitted for this session."
    ::= { alPptpStatsSessionEntry 22 }

alPptpStatsSessionSendZLB OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of Zero 
         Length Body acknowledgement packets transmitted 
         for this session."
    ::= { alPptpStatsSessionEntry 23 }

alPptpStatsSessionAckTimeouts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object returns the total number of 
         acknowledgement timeouts seen on payload 
         packets for this session."
    ::= { alPptpStatsSessionEntry 24 }

alPptpStatsSessionLocalFlowOff OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the session is in a locally flowed-off 
        state because the number of outstanding unacknowledged 
        packets received from the peer is equal to the local 
        window size."
    ::= { alPptpStatsSessionEntry 25 }

alPptpStatsSessionPeerFlowOff OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the session peer is in a flowed-off 
        state because the number of outstanding unacknowledged 
        packets sent to the peer is equal to the peer's window  
        size."
    ::= { alPptpStatsSessionEntry 26 }

alPptpStatsSessionOutOfWindow OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of data packets received from the peer which 
        were received outside of the offered receive window."
    ::= { alPptpStatsSessionEntry 27 }

alPptpStatsSessionOutOfSequence OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of data packets that were not received in the 
              correct order (as per the sequence number)."
    ::= { alPptpStatsSessionEntry 28 }

alPptpStatsSessionTunnelPeerIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The peer's IP address for the tunnel over which this session 
        is established."
    ::= { alPptpStatsSessionEntry 29 }

altigaPptpStatsGroup OBJECT IDENTIFIER ::= { alPptpGroup 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    The objects for PPTP statistics.
--  objects
--    alPptpStatsLocalProtVers, alPptpStatsLocalFraming, 
--    alPptpStatsLocalBearer, alPptpStatsLocalFirmwareRev, 
--    alPptpStatsTotalTunnels, alPptpStatsActiveTunnels, 
--    alPptpStatsMaxTunnels, alPptpStatsTotalSessions, 
--    alPptpStatsActiveSessions, alPptpStatsMaxSessions, 
--    alPptpStatsControlRecvOctets, alPptpStatsControlRecvPackets, 
--    alPptpStatsControlRecvDiscards, alPptpStatsControlSendOctets, 
--    alPptpStatsControlSendPackets, alPptpStatsPayloadRecvOctets, 
--    alPptpStatsPayloadRecvPackets, alPptpStatsPayloadRecvDiscards, 
--    alPptpStatsPayloadSendOctets, alPptpStatsPayloadSendPackets, 
--    alPptpStatsTunnelRowStatus, alPptpStatsTunnelDatastreamId, 
--    alPptpStatsTunnelLocalIpAddr, alPptpStatsTunnelPeerIpAddr, 
--    alPptpStatsTunnelPeerHostName, 
--    alPptpStatsTunnelPeerVendorName, 
--    alPptpStatsTunnelPeerFirmwareRev, 
--    alPptpStatsTunnelPeerProtVers, 
--    alPptpStatsTunnelPeerFramingCap, 
--    alPptpStatsTunnelPeerBearerCap, alPptpStatsTunnelPeerMaxChan, 
--    alPptpStatsTunnelActiveSessions, alPptpStatsSessionRowStatus, 
--    alPptpStatsSessionDatastreamId, alPptpStatsSessionLocalCallId, 
--    alPptpStatsSessionPeerCallId, alPptpStatsSessionUserName, 
--    alPptpStatsSessionSerial, alPptpStatsSessionMinimumSpeed, 
--    alPptpStatsSessionMaximumSpeed, 
--    alPptpStatsSessionConnectSpeed, alPptpStatsSessionBearerType, 
--    alPptpStatsSessionFramingType, 
--    alPptpStatsSessionPhysicalChannel, 
--    alPptpStatsSessionLocalWindowSize, 
--    alPptpStatsSessionPeerWindowSize, alPptpStatsSessionLocalPpd, 
--    alPptpStatsSessionPeerPpd, alPptpStatsSessionRecvOctets, 
--    alPptpStatsSessionRecvPackets, alPptpStatsSessionRecvDiscards, 
--    alPptpStatsSessionRecvZLB, alPptpStatsSessionSendOctets, 
--    alPptpStatsSessionSendPackets, alPptpStatsSessionSendZLB, 
--    alPptpStatsSessionAckTimeouts, alPptpStatsSessionLocalFlowOff, 
--    alPptpStatsSessionPeerFlowOff, alPptpStatsSessionOutOfWindow, 
--    alPptpStatsSessionOutOfSequence, 
--    alPptpStatsSessionTunnelPeerIpAddr

altigaPptpStatsMibCompliance OBJECT IDENTIFIER ::= { altigaPptpStatsMibCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for agents which  
--     implement the Altiga PPTP Statistics MIB.
--  Module
--    >>current<<
--   MandGroup
--    altigaPptpStatsGroup


END