[Support]: XFS media disk failing on a bi/daily basis

[farirat]

Describe the problem you are having

Running Frigate for 20 days now, every 1-2 days I get a XFS crash on the media disk:

dmesg:

[Fri Dec 13 01:11:06 2024] XFS (sdb): Metadata corruption detected at xfs_inode_buf_verify+0x149/0x170 [xfs], xfs_inode block 0x13e549ff0 xfs_inode_buf_verify
[Fri Dec 13 01:11:06 2024] XFS (sdb): Unmount and run xfs_repair
[Fri Dec 13 01:11:06 2024] XFS (sdb): First 128 bytes of corrupted metadata buffer:
[Fri Dec 13 01:11:06 2024] 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Fri Dec 13 01:11:06 2024] XFS (sdb): metadata I/O error in "xfs_imap_to_bp+0x53/0x80 [xfs]" at daddr 0x13e549ff0 len 32 error 117
[Fri Dec 13 01:11:06 2024] XFS (sdb): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x178/0x2f0 [xfs] (fs/xfs/xfs_trans_buf.c:296).  Shutting down filesystem.
[Fri Dec 13 01:11:06 2024] XFS (sdb): Please unmount the filesystem and rectify the problem(s)

Usually I do umount the disk, xfs_repair -L it and restart Frigate, everything takes off before the issue raises again ...

smartctl -a:

# smartctl -a /dev/sdb
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.4-2-pve] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate IronWolf
Device Model:     ST8000VN004-3CP101
Serial Number:    WWZ3W8YQ
LU WWN Device Id: 5 000c50 0f67e4d7d
Firmware Version: SC60
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5319
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Dec 13 10:42:09 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(  567) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 710) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x50bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   072   064   044    Pre-fail  Always       -       17380936
  3 Spin_Up_Time            0x0003   092   091   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       22
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   088   060   045    Pre-fail  Always       -       644129955
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       3370
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       22
 18 Head_Health             0x000b   100   100   050    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   055   041   000    Old_age   Always       -       45 (Min/Max 44/57)
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       18
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       170
194 Temperature_Celsius     0x0022   045   059   000    Old_age   Always       -       45 (0 30 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   100   000    Old_age   Offline      -       3367h+23m+25.766s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       166163054612
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       52123859977

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3370         -
# 2  Extended offline    Interrupted (host reset)      00%      2462         -
# 3  Short offline       Completed without error       00%      2424         -
# 4  Short offline       Interrupted (host reset)      60%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

And xfs_repair -n outcome: pastebin

Version

0.14

What browser(s) are you using?

No response

Frigate config file

tls:
  enabled: false

#birdseye:
#  enabled: True
#  mode: continuous

objects:
  track:
    - person

auth:
  #reset_admin_password: true
  enabled: true
  session_length: 86400
  hash_iterations: 1600000

mqtt:
  enabled: true
  host: ____
  port: 1884
  user: ____
  password: ____

detectors:
  cpu:
    type: cpu
    num_threads: 3
#  cpu_tensorflow:
#    type: cpu
#    num_threads: 3
#    model:
#      path: "/custom_model.tflite"
#  ovino:
#    type: openvino
#    device: GPU

audio:
  enabled: true
  max_not_heard: 30
  min_volume: 500
  listen:
    - bark
    - fire_alarm
    - scream
    - speech
    - yell
  filters:
    speech:
      threshold: 0.8

go2rtc:
  streams:
    door_ring:
      - rtsp://____:554/cam/realmonitor?channel=1&subtype=1
      - ffmpeg:door_ring#audio=aac
    door_ring_sub:
      - rtsp://____:554/cam/realmonitor?channel=1&subtype=0
      - ffmpeg:door_ring_sub#audio=aac
    cam01:
      - rtsp://____:554/h264Preview_01_main
    cam01_sub:
      - rtsp://____:554/h264Preview_01_sub
    cam02:
      - rtsp://____:554/h264Preview_01_main
    cam02_sub:
      - rtsp://____:554/h264Preview_01_sub
    cam03:
      - rtsp://____:554/h264Preview_01_main
    cam03_sub:
      - rtsp://____:554/h264Preview_01_sub
    cam06:
      - rtsp://____:554/h264Preview_01_main
    cam06_sub:
      - rtsp://____:554/h264Preview_01_sub
    cam07:
      - rtsp://____:554/h264Preview_01_main
    cam07_sub:
      - rtsp://____:554/h264Preview_01_sub

cameras:
  door_ring:
    enabled: true
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/door_ring_sub
          input_args: preset-rtsp-restream
          roles:
            - audio
            - detect
        - path: rtsp://127.0.0.1:8554/door_ring
          input_args: preset-rtsp-restream
          roles:
            - record
    record:
      enabled: true
    detect:
      enabled: true
      width: 1280
      height: 720
      max_disappeared: 150
    objects:
      track:
        - person
        - car
      filters:
        person:
          min_score: 0.6
    motion:
      mask:
        - 0.404,0.479,0.426,0.48,0.447,0.527,0.386,0.533
        - 0.682,0.018,0.993,0.369,0.997,0.011
      threshold: 30
      contour_area: 60
      improve_contrast: 'true'
    zones:
      Entrée:
        coordinates: 0.996,0.987,0.988,0.372,0.668,0.019,0.334,0.007,0.003,0.335,0.006,0.989
        loitering_time: 0
  cam01:
    enabled: true
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/cam01_sub
          input_args: preset-rtsp-restream
          roles:
            - audio
            - detect
        - path: rtsp://127.0.0.1:8554/cam01
          input_args: preset-rtsp-restream
          roles:
            - record
    record:
      enabled: true
    detect:
      enabled: true
      width: 640
      height: 480
    motion:
      mask: 0.323,0.029,0.655,0.031,0.656,0.064,0.324,0.063
      threshold: 30
      contour_area: 30
      improve_contrast: 'true'
    zones:
      Porte_pietonne:
        coordinates: 0.659,0.115,0.747,0.118,0.845,0.418,0.547,0.434
        loitering_time: 0
      Parking_entry:
        coordinates: 0.409,0.095,0.644,0.101,0.535,0.43,0.013,0.529,0.01,0.179
        loitering_time: 0
      Parking:
        coordinates: 0.014,0.545,0.529,0.448,0.85,0.436,0.992,0.583,0.995,0.99,0.109,0.985,0.01,0.786
        loitering_time: 0
  cam02:
    enabled: true
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/cam02_sub
          input_args: preset-rtsp-restream
          roles:
            - audio
            - detect
        - path: rtsp://127.0.0.1:8554/cam02
          input_args: preset-rtsp-restream
          roles:
            - record
    record:
      enabled: true
    detect:
      enabled: true
      width: 640
      height: 480
    motion:
      mask:
        - 0.756,0.176,0.787,0.188,0.783,0.243,0.751,0.24
        - 0.832,0.19,0.996,0.241,0.994,0.991,0.805,0.628,0.91,0.337,0.814,0.291
        - 0.314,0.026,0.663,0.026,0.666,0.072,0.703,0.172,0.613,0.165,0.587,0.104,0.31,0.096
        - 0.078,0.15,0.198,0.14,0.206,0.301,0.093,0.319
    zones:
      Kitchen_zone:
        coordinates: 0.58,0.168,0.725,0.215,0.716,0.485,0.455,0.382
        loitering_time: 0
      Majel:
        coordinates: 0.755,0.321,0.88,0.397,0.674,0.982,0.011,0.993,0.004,0.366,0.407,0.271
        loitering_time: 0
  cam03:
    enabled: true
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/cam03_sub
          input_args: preset-rtsp-restream
          roles:
            - audio
            - detect
        - path: rtsp://127.0.0.1:8554/cam03
          input_args: preset-rtsp-restream
          roles:
            - record
    record:
      enabled: true
    detect:
      enabled: true
      width: 640
      height: 480
    motion:
      threshold: 30
      contour_area: 30
      improve_contrast: 'true'
      mask:
        - 0.624,0.127,0.63,0.122,0.672,0.219,0.707,0.208,0.835,0.461,0.999,0.493,0.999,0.003,0.021,0.003,0.025,0.134,0.206,0.117,0.249,0.057,0.368,0.064,0.568,0.082
        - 0.004,0.419,0.13,0.99,0.217,0.994,0.191,0.806,0.14,0.681,0.075,0.393,0.037,0.309
    zones:
      Garden_and_alley:
        coordinates:
          0.044,0.295,0.086,0.384,0.239,0.985,0.998,0.997,0.996,0.505,0.823,0.468,0.56,0.092,0.255,0.069,0.217,0.132
        loitering_time: 0
  cam06:
    enabled: true
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/cam06_sub
          input_args: preset-rtsp-restream
          roles:
            - audio
            - detect
        - path: rtsp://127.0.0.1:8554/cam06
          input_args: preset-rtsp-restream
          roles:
            - record
    record:
      enabled: true
    detect:
      enabled: true
      width: 640
      height: 480
    objects:
      track:
        - person
        - car
      filters:
        person:
          min_score: 0.6
          max_area: 100000
        car:
          min_score: 0.65
    motion:
      threshold: 40
      contour_area: 20
      improve_contrast: 'true'
      mask:
        - 0.878,0.006,0.854,0.076,0.858,0.49,0.865,0.602,0.998,0.598,0.997,0.229,0.947,0.012
        - 0.889,0.789,0.963,0.785,0.963,0.984,0.885,0.976
        - 0.344,0.042,0.641,0.044,0.643,0.085,0.349,0.084
    zones:
      Private_entrance:
        coordinates:
          0.013,0.669,0.326,0.011,0.646,0.011,0.67,0.21,0.846,0.216,0.862,0.605,0.875,0.997,0.066,0.995
        loitering_time: 0
      Roufa_zone:
        coordinates: 0.163,0.011,0.279,0.079,0.019,0.637,0.009,0.171
        loitering_time: 0
  cam07:
    enabled: true
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/cam07_sub
          input_args: preset-rtsp-restream
          roles:
            - audio
            - detect
        - path: rtsp://127.0.0.1:8554/cam07
          input_args: preset-rtsp-restream
          roles:
            - record
    record:
      enabled: true
    detect:
      enabled: true
      width: 640
      height: 480
#camera_groups:
#  front_door:
#    cameras:
#      - door_ring_sub
#    icon: LuCar
#    order: 0

    motion:
      mask:
        - 0.001,0.006,0.003,0.99,0.123,0.994,0.083,0.003
        - 0.683,0.018,0.701,0.068,0.748,0.089,0.779,0.008
        - 0.345,0.039,0.64,0.048,0.646,0.094,0.348,0.085
    zones:
      Entry:
        coordinates:
          0.13,0.989,0.105,0.202,0.281,0.013,0.643,0.04,0.935,0.413,0.996,0.566,0.992,0.985
        loitering_time: 0
logger:
  default: info
    #  logs:
    #    frigate.record.maintainer: debug

ffmpeg:
  # Optional: global ffmpeg args
  global_args: -hide_banner -loglevel warning -threads 4
  # Optional: global hwaccel args
  # NOTE: See hardware acceleration docs for your specific device
  hwaccel_args: auto
  # Optional: global input args
  input_args: preset-rtsp-generic
  # Optional: global output args
  output_args:
    # Optional: output args for detect streams
    detect: -threads 4 -f rawvideo -pix_fmt yuv420p
    # Optional: output args for record streams
    record: preset-record-generic-audio-aac
  # Optional: Time in seconds to wait before ffmpeg retries connecting to the camera.
  # If set too low, frigate will retry a connection to the camera's stream too frequently, using up the limited streams some cameras can allow at once
  # If set too high, then if a ffmpeg crash or camera stream timeout occurs, you could potentially lose up to a maximum of retry_interval second(s) of footage
  # NOTE: this can be a useful setting for Wireless / Battery cameras to reduce how much footage is potentially lost during a connection timeout.
  retry_interval: 10

record:
  enabled: true
  # Optional: Number of minutes to wait between cleanup runs
  # This can be used to reduce the frequency of deleting recording segments from disk if you want to minimize i/o
  expire_interval: 60
  # Optional: Sync recordings with disk on startup and once a day
  sync_recordings: true
  # Optional: Retention settings for recording
  retain:
    # Optional: Number of days to retain recordings regardless of events
    # NOTE: This should be set to 0 and retention should be defined in events section below
    #       if you only want to retain recordings of events.
    days: 5
    # Optional: Mode for retention. Available options are: all, motion, and active_objects
    #   all - save all recording segments regardless of activity
    #   motion - save all recordings segments with any detected motion
    #   active_objects - save all recording segments with active/moving objects
    # NOTE: this mode only applies when the days setting above is greater than 0
    mode: motion
  # Optional: Recording Export Settings
  export:
    # Optional: Timelapse Output Args
    # NOTE: The default args are set to fit 24 hours of recording into 1 hour playback.
    # See https://stackoverflow.com/a/58268695 for more info on how these args work.
    # As an example: if you wanted to go from 24 hours to 30 minutes that would be going
    # from 86400 seconds to 1800 seconds which would be 1800 / 86400 = 0.02.
    # The -r (framerate) dictates how smooth the output video is.
    # So the args would be -vf setpts=0.02*PTS -r 30 in that case.
    timelapse_args: -vf setpts=0.04*PTS -r 30
  # Optional: Recording Preview Settings
  preview:
    # Optional: Quality of recording preview
    # Options are: very_low, low, medium, high, very_high
    quality: very_low
  # Optional: Event recording settings
  events:
    # Optional: Number of seconds before the event to include
    pre_capture: 10
    # Optional: Number of seconds after the event to include
    post_capture: 15
    # Optional: Objects to save recordings for.
    objects:
      - person
      - car
    # Optional: Retention settings for recordings of events
    retain:
      # Required: Default retention days
      default: 30
      # Optional: Mode for retention.
      #   all - save all recording segments for events regardless of activity
      #   motion - save all recordings segments for events with any detected motion
      #   active_objects - save all recording segments for event with active/moving objects
      #
      # NOTE: If the retain mode for the camera is more restrictive than the mode configured
      #       here, the segments will already be gone by the time this mode is applied.
      #       For example, if the camera retain mode is "motion", the segments without motion are
      #       never stored, so setting the mode to "all" here won't bring them back.
      mode: motion
      # Optional: Per object retention days
      objects:
        person: 30
        car: 30

snapshots:
  # Optional: Enable writing jpg snapshot to /media/frigate/clips
  enabled: true
  # Optional: save a clean PNG copy of the snapshot image
  clean_copy: true
  # Optional: print a timestamp on the snapshots
  timestamp: false
  # Optional: draw bounding box on the snapshots
  bounding_box: true
  # Optional: crop the snapshot
  crop: false
  # Optional: height to resize the snapshot to
  height: 250
  # Optional: Restrict snapshots to objects that entered any of the listed zones
  required_zones: []
  # Optional: Camera override for retention settings
  retain:
    # Required: Default retention days
    default: 90
    # Optional: Per object retention days
    objects:
      person: 365
      car: 365
  # Optional: quality of the encoded jpeg, 0-100
  quality: 70

version: 0.14

Relevant Frigate log output

2024-12-13 03:55:52.384435691  [2024-12-13 03:55:52] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam02. Keeping the 6 most recent segments out of 9 and discarding the rest...
2024-12-13 03:55:57.388973995  [2024-12-13 03:55:57] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam01. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:55:57.390212963  [2024-12-13 03:55:57] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam03. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:55:57.392021944  [2024-12-13 03:55:57] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam06. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:55:57.393267791  [2024-12-13 03:55:57] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam07. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:55:57.394009692  [2024-12-13 03:55:57] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam02. Keeping the 6 most recent segments out of 8 and discarding the rest...
2024-12-13 03:56:02.393038472  [2024-12-13 03:56:02] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for door_ring. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:56:02.393360569  [2024-12-13 03:56:02] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam01. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:56:02.394523272  [2024-12-13 03:56:02] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam02. Keeping the 6 most recent segments out of 9 and discarding the rest...
2024-12-13 03:56:07.396894334  [2024-12-13 03:56:07] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam06. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:56:07.397829831  [2024-12-13 03:56:07] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam03. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:56:07.398950777  [2024-12-13 03:56:07] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam07. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:56:07.399715567  [2024-12-13 03:56:07] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam02. Keeping the 6 most recent segments out of 8 and discarding the rest...
2024-12-13 03:56:12.401863054  [2024-12-13 03:56:12] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for door_ring. Keeping the 6 most recent segments out of 7 and discarding the rest...
2024-12-13 03:56:12.402134188  [2024-12-13 03:56:12] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam02. Keeping the 6 most recent segments out of 9 and discarding the rest...
2024-12-13 03:56:17.407607022  [2024-12-13 03:56:17] frigate.record.maintainer      WARNING : Unable to keep up with recording segments in cache for cam01. Keeping the 6 most recent segments out of 7 and discarding the rest...

Relevant go2rtc log output

N/D

FFprobe output from your camera

N/D

Frigate stats

No response

Install method

Docker Compose

docker-compose file or Docker CLI command

services:
  frigate:
    image: ghcr.io/blakeblackshear/frigate:stable
    network_mode: host
    container_name: frigate
    privileged: true
    restart: no
    shm_size: "128mb" # Calculation: https://docs.frigate.video/frigate/installation#calculating-required-shm-size
    entrypoint: ["/bin/bash", "/startup-hook.sh"]
      #devices:
      #- /dev/bus/usb:/dev/bus/usb # USB Coral
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /etc/timezone:/etc/timezone:ro
      - ./frigate/config:/config
      - ./frigate/scripts/startup-hook.sh:/startup-hook.sh
      - /opt/storage/data/frigate/media/exports:/media/frigate/exports
      - /opt/storage/data/frigate/media/clips:/media/frigate/clips
      - /opt/storage/data/frigate/media/recordings:/media/frigate/recordings
      - type: tmpfs # Optional: 2GB of memory, reduces SSD/SD Card wear
        target: /tmp/cache
        tmpfs:
          size: 2000000000
    env_file:
      - .frigate-env
    logging:
      driver: "fluentd"
      options:
        fluentd-address: host.docker.internal:24224

Object Detector

CPU (no coral)

Network connection

Wired

Camera make and model

Reolink

Screenshots of the Frigate UI's System metrics pages

No response

Any other information that may be helpful

Worth noting:

Running docker-compose inside a proxmox vm, 36G Ram, 6 Cores and the media disk is completely dedicated to frigate.

My startup-hook.sh:

#!/bin/bash

echo "######### Startup hook - begin"

echo "Disabling nginx access logs"
sed -i 's/access_log \/dev\/stdout main;/access_log \/dev\/null main;/g' /usr/local/nginx/conf/nginx.conf

echo "######### Startup hook - end"

# Delegate to original entrypoint
exec /init "$@"