DS918+ with WAVLINK adapter working but only at 1000 Mbps and 45 MB/s

[johnrues]

Hi,

For some reason, I only get 1000 Mbps in the Network Interface and 45 MB/s transfer rate
My configuration is:

• DS918+ with DSM version 7.2.2-72806.
• WAVLINK 5Gbps USB C RTL8157, https://www.amazon.com/dp/B0DBZ41BPL
• The WAVLINK adapter is plugged in the back.
• The USB C to USB A adapter is https://www.amazon.com/dp/B0CBJXWL1P.
• The driver installed is 2.18.1-1
• I get a maximum of 45 MB/s transfer rate.
• I also can't figure out where jumbo rates are, if that makes any difference.

I don't know if I am missing anything obvious :|
Is there a step that I missed or something that I am not seeing?

[Littlebo81]

Had same problem here, turned out those C to A cheapo adapters are mostly USB 2.0 like this one All u need is to get a real deal USB 3.0 piece like this one and you should be good. Read 1 star feedbacks, if it wont do over 2.0 ppl gna usually mention it there. One more thing here, many chineseum 3.0 3.2 etc adapters dont mirror all the contacts for both sides so they gna do 3.0 only on 1 side, if you cant get high speed then just flip C male in the adapter.