Changed repo url for sitronlabs/SitronLabs_TexasInstruments_OPT3001_Arduino_Library

[nschurando]

No description provided.

[github-actions]

Hi @nschurando.
Your pull request has been detected as something other than a Library Manager submission.
A maintainer will need to review it before it can be merged.

If you intended to submit a library, please check the instructions and update your pull request if necessary:
https://github.com/arduino/library-registry/blob/main/README.md#instructions

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/sitronlabs/SitronLabs_TexasInstruments_OPT3001_Arduino_Library:

Linting library in SitronLabs_TexasInstruments_OPT3001_Arduino_Library
INFO: No header file found matching library name (Sitron_Labs_OPT3001_Arduino_Library.h). Best practices are for primary
      header filename to match library name.                                                                            
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
WARNING: library.properties name value Sitron Labs OPT3001 Arduino Library is longer than the recommended length of 32  
         characters.                                                                                                    
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP010)                                                                                                   
WARNING: Library name Sitron Labs OPT3001 Arduino Library contains "Arduino". This is superfluous.             
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP014)                                                                                          
WARNING: library.properties name Sitron Labs OPT3001 Arduino Library contains spaces. Although supported, best practices
         is to not use spaces.                                                                                          
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP015)                                                                                                   
WARNING: Library name Sitron Labs OPT3001 Arduino Library contains "library". This is superfluous.             
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP016)                                                                                          
ERROR: Library name Sitron Labs OPT3001 Arduino Library not found in the Library Manager index. Library names are not   
       allowed to change after being added to the index.                                                                
       See: https://github.com/arduino/library-registry/blob/main/FAQ.md#how-can-i-change-a-librarys-name               
       (Rule LP018)                                                                                                     
WARNING: library.properties depends field item(s) Wire not found in the Library Manager index.                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP048)                                                                                          
WARNING: No example sketches found. Please provide examples.                                      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples
         (Rule LD004)                                                                             

Linter results for project: 1 ERRORS, 6 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @nschurando
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[per1234]

Hello @nschurando. I am confirming your request.

Unlike submissions, this type of request is still handled manually. The Library Manager index maintainer occasionally comes through to clear all the outstanding requests. They will merge this pull request when it is done. You will get a notification from GitHub at that time.

After that, you can monitor the indexing of the library via its dedicated logs web page.
Information about that here:
https://github.com/arduino/library-registry/blob/main/FAQ.md#can-i-check-on-library-releases-being-added-to-library-manager

[per1234]

@nschurando why did you close the pull request? You must leave it open until the index maintainer takes care of updating the URL in the database, as I clearly explained in my previous comment.

[nschurando]

Apologies. I can't seem to reopen it from my side, can you do it?

[nschurando]

Ah, now I can.

[per1234]

Unfortunately it is still closed and I can't reopen it. I think the problem is due to you having temporarily deleted your fork in preparation for #7313. You must preserve your fork until all your PRs are merged. You are free to delete your fork once the PRs are merged if you like.

You should always create a dedicated branch in the fork for each pull request so that you can submit as many separate PRs as you like at the same time. You should never use the main branch of the fork to prepare your pull requests. You should instead keep the main branch in sync with the parent repository, so that branch can be used as the base of each of the branches you create for pull requests.

[per1234]

Please open an new pull request for the library URL update.