diff --git a/textile/objects-features.textile b/textile/objects-features.textile
index 44ac6bea..f62a5aa9 100644
--- a/textile/objects-features.textile
+++ b/textile/objects-features.textile
@@ -108,7 +108,7 @@ h3(#realtime-objects). RealtimeObjects
 *** @(RTO4b1)@ All objects except the one with id @root@ must be removed from the internal @ObjectsPool@
 *** @(RTO4b2)@ The data for the @LiveMap@ with id @root@ must be cleared by setting it to a zero-value per "RTLM4":#RTLM4. Note that the client SDK must not create a new @LiveMap@ instance with id @root@; it must only clear the internal data of the existing @LiveMap@ with id @root@
 **** @(RTO4b2a)@ Emit a @LiveMapUpdate@ object for the @LiveMap@ with ID @root@, with @LiveMapUpdate.update@ consisting of entries for the keys that were removed, each set to @removed@
-*** @(RTO4b3)@ The @SyncObjectsPool@ list must be cleared
+*** @(RTO4b3)@ The @SyncObjectMessages@ list must be cleared
 *** @(RTO4b5)@ The @BufferedObjectOperations@ list must be cleared
 *** @(RTO4b4)@ Perform the actions for objects sync completion as described in "RTO5c":#RTO5c
 * @(RTO5)@ The realtime system reserves the right to initiate an objects sync of the objects on a channel at any point once a channel is attached. A server initiated objects sync provides Ably with a means to send a complete list of objects present on the channel at any point
@@ -116,14 +116,15 @@ h3(#realtime-objects). RealtimeObjects
 ** @(RTO5a)@ When an @OBJECT_SYNC@ @ProtocolMessage@ is received with a @channel@ attribute matching the channel name, the client library must parse the @channelSerial@ attribute:
 *** @(RTO5a1)@ The @channelSerial@ is used as the sync cursor and is a two-part identifier: @<sequence id>:<cursor value>@
 *** @(RTO5a2)@ If a new sequence id is sent from Ably, the client library must treat it as the start of a new objects sync sequence, and any previous in-flight sync must be discarded:
-**** @(RTO5a2a)@ The @SyncObjectsPool@ list must be cleared
+**** @(RTO5a2a)@ The @SyncObjectMessages@ list must be cleared
 **** @(RTO5a2b)@ The @BufferedObjectOperations@ list must be cleared
 *** @(RTO5a3)@ If the sequence id matches the previously received sequence id, the client library should continue the sync process
 *** @(RTO5a4)@ The objects sync sequence for that sequence identifier is considered complete once the cursor is empty; that is when the @channelSerial@ looks like @<sequence id>:@
 *** @(RTO5a5)@ An @OBJECT_SYNC@ may also be sent with no @channelSerial@ attribute. In this case, the sync data is entirely contained within the @ProtocolMessage@
-** @(RTO5b)@ During the sync sequence, the "@ObjectMessage.object@":../features#TR4r values from incoming @OBJECT_SYNC@ @ProtocolMessages@ must be temporarily stored in the internal @SyncObjectsPool@ list
+** @(RTO5b)@ During the sync sequence, the "@ObjectMessage.object@":../features#TR4r values from incoming @OBJECT_SYNC@ @ProtocolMessages@ must be temporarily stored in the internal @SyncObjectMessages@ list
+*** @(RTO5b1)@ @SyncObjectMessages@ is a temporary internal array of @ObjectState@ values used during the sync sequence
 ** @(RTO5c)@ When the objects sync has completed, the client library must perform the following actions in order:
-*** @(RTO5c1)@ For each @ObjectState@ in the @SyncObjectsPool@ list:
+*** @(RTO5c1)@ For each @ObjectState@ in the @SyncObjectMessages@ list:
 **** @(RTO5c1a)@ If an object with @ObjectState.objectId@ exists in the internal @ObjectsPool@:
 ***** @(RTO5c1a1)@ Replace the internal data for the object as described in "RTLC6":#RTLC6 or "RTLM6":#RTLM6 depending on the object type, passing in current @ObjectState@
 ***** @(RTO5c1a2)@ Store the @LiveObjectUpdate@ object returned by the operation, along with a reference to the updated object
@@ -137,7 +138,7 @@ h3(#realtime-objects). RealtimeObjects
 *** @(RTO5c7)@ For each previously existing object that was updated as a result of "RTO5c1a":#RTO5c1a, emit the corresponding stored @LiveObjectUpdate@ object from "RTO5c1a2":#RTO5c1a2
 *** @(RTO5c6)@ @ObjectMessages@ stored in the @BufferedObjectOperations@ list are applied as described in "RTO9":#RTO9
 *** @(RTO5c3)@ Clear any stored sync sequence identifiers and cursor values
-*** @(RTO5c4)@ The @SyncObjectsPool@ must be cleared
+*** @(RTO5c4)@ The @SyncObjectMessages@ list must be cleared
 *** @(RTO5c5)@ The @BufferedObjectOperations@ list must be cleared
 * @(RTO6)@ Certain object operations may require creating a zero-value object if one does not already exist in the internal @ObjectsPool@ for the given @objectId@. This can be done as follows:
 ** @(RTO6a)@ If an object with @objectId@ exists in @ObjectsPool@, do not create a new object