diff --git a/Firmware/skr_mini_e3_v2_config.cfg b/Firmware/skr_mini_e3_v2_config.cfg
index f23948b..b1ded21 100644
--- a/Firmware/skr_mini_e3_v2_config.cfg
+++ b/Firmware/skr_mini_e3_v2_config.cfg
@@ -341,6 +341,12 @@ gcode:
     M117 Homing...                 ; display message
     G28 Y0 X0 Z0
     
+    # Temperature parameters from common superslicer profiles.
+    #{% set bed_temp = params.BED|default(60)|float %}
+    #{% set extruder_temp = params.EXTRUDER|default(190)|float %}
+    #M190 S{bed_temp}      ; Set the bed temp and wait
+    #M109 S{extruder_temp} ; Set extruder temp and wait
+    
     ##Purge Line Gcode
     #G92 E0;
     #G90
diff --git a/Firmware/skr_mini_e3_v3_config.cfg b/Firmware/skr_mini_e3_v3_config.cfg
index e26e9d1..b8760a5 100644
--- a/Firmware/skr_mini_e3_v3_config.cfg
+++ b/Firmware/skr_mini_e3_v3_config.cfg
@@ -341,6 +341,12 @@ gcode:
     M117 Homing...                 ; display message
     G28 Y0 X0 Z0
     
+    # Temperature parameters from common superslicer profiles.
+    #{% set bed_temp = params.BED|default(60)|float %}
+    #{% set extruder_temp = params.EXTRUDER|default(190)|float %}
+    #M190 S{bed_temp}      ; Set the bed temp and wait
+    #M109 S{extruder_temp} ; Set extruder temp and wait
+    
     ##Purge Line Gcode
     #G92 E0;
     #G90
@@ -400,4 +406,4 @@ gcode:
     M106 S0                          ; turn off fan
     G90                              ; absolute positioning
     G0 X{max_x / 2} Y{max_y} F3600   ; park nozzle at rear
-    M117 Finished!
\ No newline at end of file
+    M117 Finished!