neopixel connection points to wrong connector on SKR-Pico Image

[eefweenink]

On page https://docs.vorondesign.com/build/electrical/v0_skr_pico_wiring.html is the image:
https://docs.vorondesign.com/build/electrical/images/Voron0.1_Wiring_Diagram_SKR_PICO_V1.0.jpg
In the top of the image the nexopixel data connection points to gpio29

For the installation there is the template: https://github.com/VoronDesign/Voron-0/blob/Voron0.2r1/Firmware/bigtreetech-skr-pico-v1.0.cfg
In the template:
[neopixel board_rgb]
pin: gpio24

In the pinout just below: https://docs.vorondesign.com/build/electrical/images/skr-pico-pinout.png
the connector gpio24 is in the middle one of the RGB connector.

Tested both combinations (setting+ connector to gpio24 OR setting+ connector to gpio29)
Connecting to gpio24 is correct.
Conclusion: there is an error in the first image.

[keyboard-magpie]

Agree the annotated photo points to the wrong port. Will see if i can track down the originator of the image.

That said the text part of the guide doesn't mention RGB at all (most likely because it's optional).