📃 Triage Support ~ Top Known Issues #16440
Replies: 7 comments
-
|
According to @GregValiant , there is a problem with slicing that started in Cura 5. |
Beta Was this translation helpful? Give feedback.
-
|
It would also be good to do the same with the most frequently requested Enhancements / New Feature . ;) |
Beta Was this translation helpful? Give feedback.
-
|
There may be something going on between Cura and Windows 11. There are a lot of problems being reported in regards to "Won't Slice" with Win11 but I'm able to slice the models in Win10. |
Beta Was this translation helpful? Give feedback.
-
|
CURA 5.6 Trending Issues 1 - Slice Failed due to Print Thin Walls #17897 For some geometries, activation of the Print Thin Walls option generates an error that stops the G-Code generation process.. 2 - Slice Failed on Windows 11 #17906 Recurring cases of slicing issues on Windows 11 which, when tested on Windows 10 workstations, generate no error. 3 - Slice Failed due to Tree Support #17905 With Cura versions 5.5 and 5.6, if the settings do not allow tree-shaped supports to reach the supported area (branch angle, trunk diameter, space to create the support), the software generates an error and does not continue the slicing operation. Expecting result : No support if they cannot be generate but a model sliced. 4 - Slicing success can be Part position dependant #17904 Sometimes changing the position or rotation of a part can make or break the cut. 5- First Layer Wallspeed too fast If we have just some Wall on sliced geometry initial speed are not printed at initial layer speed 6- FLSUN 400 + Windows Several issues and when we try to load the sample project Cura Crash on Windows 10 7 - Slicing fails with CuraEngine Tiled Infill Generation Slicing fails with CuraEngine Tiled Infill Generation 0.2.0 Plugin Enabled on Linux OS Last problem for versions 5.5 & 5.6 the slicing time in some cases exploded. I didn't see many report on the github but some exchanges on the forum : https://community.ultimaker.com/topic/44443-slicing-stalls-in-cura-55/#comment-327364 And |
Beta Was this translation helpful? Give feedback.
-
|
@5axes - nice piece of work there. |
Beta Was this translation helpful? Give feedback.
-
|
Some complementary tests and data concerning slicing times between different slicer versions for parameters as similar as possible.
|
Beta Was this translation helpful? Give feedback.
-
|
Special mention for the Great_Lion_Wall_Light
At least 6 reports for this part a record in the category. |
Beta Was this translation helpful? Give feedback.
-
Hey All 👋 ,
Since searching for duplicates on GitHub is quite tricky, I've compiled a list of the issues which I believe are reported often. This is not a complete list, but one that I believe to be most helpful. If you feel that there are things clearly missing here, you can leave a comment and I can update this overview to reflect it.
Last Updated 09-08-2023
Crashes need to be evaluated on a case-by-case basis. We don’t know if it’s a duplicate until we’ve had a developer look at it with the engine in debug mode, so I left them out of the overview.
Trending Issues
Missing printer-related definitions, specifically Elegoo?
Elegoo Printers are missing profiles on Mac #16007
Support Brim is missing if buildplate adhesion is set to none
No Support Brim if Buildplate Adhesion is set to None. #14983
Supportbrim is printed before Skirt
Skirt is printed AFTER support on first layer #15088
Mac Installer has a damaged "bundle-identifier" (CFBundleIdentifier)
[macOS] UltiMaker Cura 5.2.2 has a damaged "bundle-identifier" (CFBundleIdentifier) #14375
Align to Buildplate doesn’t work for grouped meshes
"Align face to build plate" does not work for grouped or merged models #14237
Weird small brims in dual extrusion
Spliced Brim Count not matching Settings Brim Count after Part Merge #16055
Unable to click multiple files on Windows
Unable to select multiple files in "Open File(s)" dialog #15879
Brim Distance not working anymore for Per Object Settings
Brim distance on multiple object #14862
Enable Brim Only on Inside as an option
Feature Request: Brim only on inside #2853
Trouble with opening STLs
Unable to open any .stl files at all. #16249
Commonly Reported issues
Multiple Monitor Issue
[Cura 5.0.0 Beta +1] Cura does not start under Win10 #11907
Profiles missing when creating a new material, not based on a generic material
[4.7.0] Profiles missing and cannot be created #8229
Improve Klipper support
Improving Cura for Klipper and Smooth Motion Firmware 🏃 #16012
Auto Arrange focuses more on placing big objects in the center rather than making sure everything fits
"arrange all models" not working #14112
Issues with scrolling behavior
Checkboxes to change the new scrolling behaviours of menu lists. (Click and Drag Scrolling, Smooth Scrolling) #12110
Cura Doesn't remember last-opened file directory.
Does not save Directory location when you load a file, and does not name the file when you go to save it #12295
Combing Not In Skin is broken
Combing regression from Cura 4 to Cura 5 when printing the benchy #14511
Hide seam is actually not hidden and gives random results
Could you check if you get the same result if you change the Seam Corner Preference to None?
Z-seam Misalignment #15290
Field Loses focus while reducing a value to 0 to type
strange cursor movement to another field when changing first number of infill percentage value #12949
Raft top layer incomplete on certain positions on the buildplate
Raft does not print completely #12276
When I'm not sure if someone's Operating System is still supported, I often forward them to this page:
https://support.makerbot.com/s/article/1667337917781
@fieldOfView , @GregValiant , @Asterchades, I believe this list could help you out the most.
Again, feel free to use this comment section so we can start adding and/or removing things from this list.
Beta Was this translation helpful? Give feedback.
All reactions