Repository navigation
ESP32 dev board #39
Replies: 3 comments 3 replies
|
Hello, I can't speak for the dev board I'm only testing Xiao C6. Xiao works great with latest version update. Stable dual stream at 160mhz for hours. I even tried three streams and it worked. You need to have a great wifi signal, ideally use an external wifi antenna. |
|
I'm getting around -50dBm so I don't think the wifi is the problem |
|
No background noise at all? My Olimex POE and ICS-43434 produces a lot of background noise. I do have a lot of detections, but a cleaner audio would be nice. |
|
@Sukecz - which microphone are you using to get this quality? My INMP441 is fairly noisy. A basic Amazon plug-in USB going straight into RPi5-hosted BirdNet-Go instance is much "cleaner". Also, if using a MEMS microphone, do you have a pop filter or other soft foam covering it? Thanks! |
|
Update: Maybe there was something wrong with my esp32 board. I changed it and the latest version is working fine now :) |
Uh oh!
There was an error while loading. Please reload this page.
I'm using a generic ESP32 dev board with an INMP441. At first, the stream was basically unusable because of constant streaming issues. The v1.9.0 made it worse for me.
Downgraded to 1.7.0 and made a few changes to the code since I don't need the MQTT functionality, and I also bumped the ESP32 clock to 240 MHz. That improved things quite a bit I still get some stream losses here and there.
What's been your experience with the stream stability?
All reactions