amremote/remote.conf at master · Stane1983/amremote · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
#*********************************************************************************************************
#this file is configuration for each factory remote device
# 	work_mode	  0 :software mode  1 :hardware mode
#	repeat_enable	  0 :disable repeat 1 :enable repeat
#
#	factory_code      each device has it's unique factory code.
#			  pattern:custom_code(16bit)+index_code(16bit)
#			  examble: 0xff000001 = 0xff00(custom cod)  0001 (index)
#
#	release_delay	  unit:ms.release will report from kernel to user layer after this period of time
#			  from press or repeat triggered.
#
#	debug_enable      0 :debug disable  1 :debug disable
#
# SW MODE:
#	bit_count	  how many bits in each frame
#	tw_leader_act	  time window for leader active
#	tw_bit0		  time window for bit0 time.
#	tw_bit1		  time window for bit1 time
#	tw_repeat_leader  time window for repeat leader
# REG
#	reg_base_gen	  set value for PREG_IR_DEC_BASE_GEN
#	reg_control	  set value for PREG_IR_DEC_CONTROL
#	reg_leader_act	  set value for PREG_IR_DEC_LEADER_ACTIVE
#	reg_leader_idle	  set value for PREG_IR_DEC_LEADER_IDLE
#	reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
#	reg_bit0_time	  set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
factory_code	= 0x40400001
work_mode  		= 1
repeat_enable = 0
release_delay	=	150
debug_enable 	= 1
reg_control	= 0xfbe40

key_begin
		0x00 11
		0x01 2
		0x02 3
		0x03 4
		0x04 5
		0x05 6
		0x06 7
		0x07 8
		0x08 9
		0x09 10
		0x0D 28
		0x1D 158
		0x45 14
		0x0B 103
		0x0E 108
		0x10 105
		0x11 106
		0x5B 48
		0x57 46
		0x54 32
		0x19 139
		0x1F 115
		0x1E 114
		0x16 102
key_end