amremote/rc5.conf at master · Stane1983/amremote · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
#*********************************************************************************************************
#this file is configuration for each factory remote device
# 	work_mode	  0 :software mode  1 :hardware mode
#	repeat_enable	  0 :disable repeat 1 :enable repeat
#
#	factory_code      each device has it's unique factory code.
#			  pattern:custom_code(16bit)+index_code(16bit)
#			  examble: 0xff000001 = 0xff00(custom cod)  0001 (index)
#
#	release_delay	  unit:ms.release will report from kernel to user layer after this period of time
#			  from press or repeat triggered.
#
#	debug_enable      0 :debug disable  1 :debug disable
#
# SW MODE:
#	bit_count	  how many bits in each frame
#	tw_leader_act	  time window for leader active
#	tw_bit0		  time window for bit0 time.
#	tw_bit1		  time window for bit1 time
#	tw_repeat_leader  time window for repeat leader
# REG
#	reg_base_gen	  set value for PREG_IR_DEC_BASE_GEN
#	reg_control	  set value for PREG_IR_DEC_CONTROL
#	reg_leader_act	  set value for PREG_IR_DEC_LEADER_ACTIVE
#	reg_leader_idle	  set value for PREG_IR_DEC_LEADER_IDLE
#	reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
#	reg_bit0_time	  set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#CVT RC5 remote
work_mode  		= 0x32
repeat_enable = 0
release_delay	=	180
debug_enable 	= 0
tw_bit0		 =0x0398035a
reg_control      =0x8574
reg_base_gen     =0
bit_count        =6

key_begin
		0x36 57
key_end