Order of Battery charge / grid Export in the Energy Dashboard -> Powerflow

[ChristophCaina]

Hi there,

In a couple of weeks, I will get a new Battery Storage for my Solarsystem.
My Solar Installation is a 13 kwp roof system - but the battery is a smaller AC connected one.

I have now started a simulation how my energy usage might look when the storage will arive - and for this, I have created some virtual sensors, simulating the battery usage, charging and discharge power.

So my current Setup is like this::

• Solar AC Power (production)
• Solar AC Power Grid (Import / export) -> real data
• Battery Charge / Discharge -> is using the Solar AC Power Grid sensor (charge: max 2.4 kW, discharge: max 2.4 kW)

For the Energy Dashboard configuration, I have created:

• Virtual Grid Power Sensor: Solar AC Power Grid - Battery Charge / Discharge
• Virtual Grid Power Negative (import)
• Virtual Grid Power Positive (export)

Based on both Positive and Negative Sensors, I have created two integral sensors, calculating the Grid Export and the Grid import.
And this seems to work as expected...

But - the Power Flow chart in the Energy Dashboard is a bit confusing...

The numbers seem to be correct, but Battery Charge is ordered on top of the Grid export.

A better option would be, to show Battery Charge first - and on top of that, the grid export, as the export is what the battery can't use for charging itself.

So it should probably look similar to this?

Or did I missed something during the setup?