dell/inspiron/14-5410: init

Author: Frontear

dell/inspiron/14-5410/README.md

@@ -0,0 +1,13 @@
+# Dell Inpsiron 14 5410
+
+### Hardware
+- CPU: Intel® Core™ i7-1195G7
+- GPU: Intel® Iris® Xe Graphics
+
+### Module Info
+- Enables `services.fwupd` to receive firmware updates from vendors.
+- Enables `services.thermald` to achieve better thermal behaviour.
+
+### Module Recommendations
+- Use `services.power-profiles-daemon` to enable power savings, other services like `services.tlp` and `services.auto-cpufreq` are not as good and can cause performance issues.
+- The new `xe` kernel module causes a flickering effect on bootup, but is otherwise stable enough for minimal use. Enable it with `hardware.intelgpu.driver = "xe"` and configure your kernel parameters (see: <https://wiki.archlinux.org/title/Intel_graphics#Testing_the_new_experimental_Xe_driver>).

dell/inspiron/14-5410/default.nix

@@ -0,0 +1,20 @@
+{
+  lib,
+  ...
+}:
+{
+  imports = [
+    ../../../common/cpu/intel/tiger-lake/cpu-only.nix
+    ../../../common/gpu/intel/tiger-lake
+    ../../../common/pc/laptop
+    ../../../common/pc/ssd
+    ../../../common/hidpi.nix
+  ];
+
+  config = {
+    hardware.enableRedistributableFirmware = lib.mkDefault true;
+
+    services.fwupd.enable = lib.mkDefault true;
+    services.thermald.enable = lib.mkDefault true;
+  };
+}

flake.nix

@@ -71,6 +71,7 @@
           dell-g3-3779 = import ./dell/g3/3779;
           dell-g3-3579 = import ./dell/g3/3579;
           dell-inspiron-3442 = import ./dell/inspiron/3442;
+          dell-inspiron-14-5410 = import ./dell/inspiron/14-5410;
           dell-inspiron-14-5420 = import ./dell/inspiron/14-5420;
           dell-inspiron-5509 = import ./dell/inspiron/5509;
           dell-inspiron-5515 = import ./dell/inspiron/5515;