vidulum-mn-install.sh

#!/bin/bash
# Script updated by LoulouCrypto
# https://www.louloucrypto.fr
# If you want to support me
# My vdl wallet : 
# v1MYFzCiHPgbzFbesutnEwMs5Z37pACoVp4


CONFIG_FILE='vidulum.conf'
CONFIGFOLDER='/root/.vidulum'
PARAMFOLDER='/root/.vidulum-params'
COIN_PATH='/usr/local/bin'
#64 bit only
COIN_TGZ='https://github.com/vidulum/vidulum/releases/download/2.2.1/VDL-Linux.zip'
BOOTSTRAP_TGZ='zang.ovh/vdl/bootstrap.zip'
COIN_DAEMON="vidulumd"
COIN_CLI="vidulum-cli"
COIN_TX="vidulum-tx"
COIN_NAME='Vidulum'
COIN_PORT=7676

NODEIP=$(curl -4 icanhazip.com)

RED='\033[0;31m'
GREEN='\033[0;32m'
NC='\033[0m'

progressfilt () {
  local flag=false c count cr=$'\r' nl=$'\n'
  while IFS='' read -d '' -rn 1 c
  do
    if $flag
    then
      printf '%c' "$c"
    else
      if [[ $c != $cr && $c != $nl ]]
      then
        count=0
      else
        ((count++))
        if ((count > 1))
        then
          flag=true
        fi
      fi
    fi
  done
}

function download_node() {
figlet -f slant "Vidulum"
  echo -e "Prepare to download $COIN_NAME"
  TMP_FOLDER=$(mktemp -d)
  cd $TMP_FOLDER
  wget --progress=bar:force $COIN_TGZ 2>&1 | progressfilt
  COIN_ZIP=$(echo $COIN_TGZ | awk -F'/' '{print $NF}')
  unzip $COIN_ZIP >/dev/null 2>&1
  cd VDL-Linux
  chmod +x $COIN_DAEMON $COIN_CLI $COIN_TX
  cp -p $COIN_DAEMON $COIN_CLI $COIN_TX $COIN_PATH/
  cd ..
  rm -f $COIN_ZIP >/dev/null 2>&1
  rm -rf $TMP_FOLDER >/dev/null 2>&1
  clear
}

function configure_systemd() {
  cat << EOF > /etc/systemd/system/$COIN_NAME.service
[Unit]
Description=$COIN_NAME service
After=network.target
[Service]
User=root
Group=root
Type=forking
#PIDFile=$CONFIGFOLDER/$COIN_NAME.pid
ExecStart=$COIN_PATH/$COIN_DAEMON -daemon -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER
ExecStop=-$COIN_PATH/$COIN_CLI -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER stop
Restart=always
PrivateTmp=true
TimeoutStopSec=60s
TimeoutStartSec=10s
StartLimitInterval=120s
StartLimitBurst=5
[Install]
WantedBy=multi-user.target
EOF

  systemctl daemon-reload
  sleep 3
  systemctl start $COIN_NAME.service
  systemctl enable $COIN_NAME.service >/dev/null 2>&1

  if [[ -z "$(ps axo cmd:100 | egrep $COIN_DAEMON)" ]]; then
    echo -e "${RED}$COIN_NAME is not running${NC}, please investigate. You should start by running the following commands as root:"
    echo -e "${GREEN}systemctl start $COIN_NAME.service"
    echo -e "systemctl status $COIN_NAME.service"
    echo -e "less /var/log/syslog${NC}"
    exit 1
  fi
}

function configure_startup() {
  cat << EOF > /etc/init.d/$COIN_NAME
#! /bin/bash
### BEGIN INIT INFO
# Provides: $COIN_NAME
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: $COIN_NAME
# Description: This file starts and stops $COIN_NAME MN server
#
### END INIT INFO
case "\$1" in
 start)
   $COIN_PATH/$COIN_DAEMON -daemon -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER
   sleep 5
   ;;
 stop)
   $COIN_PATH/$COIN_CLI -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER stop
   ;;
 restart)
   $COIN_CLI stop
   sleep 10
   $COIN_PATH/$COIN_DAEMON -daemon -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER
   ;;
 *)
   echo "Usage: $COIN_NAME {start|stop|restart}" >&2
   exit 3
   ;;
esac
EOF
chmod +x /etc/init.d/$COIN_NAME >/dev/null 2>&1
update-rc.d $COIN_NAME defaults >/dev/null 2>&1
/etc/init.d/$COIN_NAME start >/dev/null 2>&1
if [ "$?" -gt "0" ]; then
 sleep 5
 /etc/init.d/$COIN_NAME start >/dev/null 2>&1
fi
}


function create_config() {
  mkdir $CONFIGFOLDER >/dev/null 2>&1
  mkdir $PARAMFOLDER >/dev/null 2>&1
  echo "Downloading $COIN_NAME params"
  cd $PARAMFOLDER
  wget https://github.com/vidulum/sapling-params/releases/download/sapling/sprout-proving.key 
  wget https://github.com/vidulum/sapling-params/releases/download/sapling/sprout-verifying.key 
  wget https://github.com/vidulum/sapling-params/releases/download/sapling/sprout-groth16.params 
  wget https://github.com/vidulum/sapling-params/releases/download/sapling/sapling-spend.params
  wget https://github.com/vidulum/sapling-params/releases/download/sapling/sapling-output.params
  cd ..
  sleep 2
  RPCUSER=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w10 | head -n1)
  RPCPASSWORD=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w22 | head -n1)
  cat << EOF > $CONFIGFOLDER/$CONFIG_FILE
rpcuser=$RPCUSER
rpcpassword=$RPCPASSWORD
rpcallowip=127.0.0.1
listen=1
server=1
txindex=1
daemon=1
port=$COIN_PORT
EOF
}

function create_key() {
  echo -e "Enter your ${RED}$COIN_NAME Masternode Private Key${NC}.\nLeave it blank to generate a new ${RED}$COIN_NAME Masternode Private Key${NC} for you:"
  read -e COINKEY
  if [[ -z "$COINKEY" ]]; then
    $COIN_DAEMON -daemon -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER
    sleep 30
    if [ -z "$(ps axo cmd:100 | grep $COIN_DAEMON)" ]; then
      echo -e "${RED}$COIN_NAME server couldn't not start. Check /var/log/syslog for errors.{$NC}"
      exit 1
    fi
    COINKEY=$($COIN_PATH/$COIN_CLI masternode genkey)
    if [ "$?" -gt "0" ];
      then
      echo -e "${RED}Wallet not fully loaded. Let us wait for 30s and try again to generate the Private Key${NC}"
      sleep 30
      COINKEY=$($COIN_PATH/$COIN_CLI masternode genkey)
      if [ "$?" -gt "0" ];
      then
        echo -e "${RED}Wallet not fully loaded. Let us wait for another 30s and try again to generate the Private Key${NC}"
        sleep 30
        COINKEY=$($COIN_PATH/$COIN_CLI masternode genkey)
      fi
    fi
  $COIN_PATH/$COIN_CLI stop
  sleep 10
fi
clear
}

function update_config() {
  cat << EOF >> $CONFIGFOLDER/$CONFIG_FILE
logintimestamps=1
maxconnections=256
#bind=$NODEIP
staking=0
masternode=1
externalip=$NODEIP:$COIN_PORT
masternodeaddr=$NODEIP:$COIN_PORT
masternodeprivkey=$COINKEY

# Seed Nodes
addnode=51.79.86.4
addnode=54.39.23.85
addnode=207.148.8.58

EOF
  cd $CONFIGFOLDER
  rm -rf blocks 
  rm -rf chainstate 
  sleep 1
  echo -e "Downloading BootStrap"
  wget --progress=bar:force $BOOTSTRAP_TGZ 2>&1 | progressfilt
  echo -e "Extracting BootStrap"
  unzip bootstrap.zip >/dev/null 2>&1
  rm -f bootstrap.zip
#  mv -f bootstrap/blocks $CONFIGFOLDER
#  mv -f bootstrap/chainstate $CONFIGFOLDER
  sleep 2
}

function enable_firewall() {
  echo -e "Installing and setting up firewall to allow ingress on port ${GREEN}$COIN_PORT${NC}"
  ufw allow ssh >/dev/null 2>&1
  ufw allow $COIN_PORT >/dev/null 2>&1
  ufw default allow outgoing >/dev/null 2>&1
  echo "y" | ufw enable >/dev/null 2>&1
}

function get_ip() {
  declare -a NODE_IPS
  for ips in $(netstat -i | awk '!/Kernel|Iface|lo/ {print $1," "}')
  do
    NODE_IPS+=($(curl --interface $ips --connect-timeout 2 -s4 icanhazip.com))
  done

  if [ ${#NODE_IPS[@]} -gt 1 ]
    then
      echo -e "${GREEN}More than one IP. Please type 0 to use the first IP, 1 for the second and so on...${NC}"
      INDEX=0
      for ip in "${NODE_IPS[@]}"
      do
        echo ${INDEX} $ip
        let INDEX=${INDEX}+1
      done
      read -e choose_ip
      NODEIP=${NODE_IPS[$choose_ip]}
  else
    NODEIP=${NODE_IPS[0]}
  fi
}

function compile_error() {
if [ "$?" -gt "0" ];
 then
  echo -e "${RED}Failed to compile $COIN_NAME. Please investigate.${NC}"
  exit 1
fi
}

function detect_ubuntu() {
 if [[ $(lsb_release -sr) > 20 ]]; then
   UBUNTU_VERSION=20
 elif [[ $(lsb_release -sr) > 18 ]]; then
   UBUNTU_VERSION=18
 elif [[ $(lsb_release -sr) > 16 ]]; then
   UBUNTU_VERSION=16
 elif [[ $(lsb_release -sr) == 14.04 ]]; then
   UBUNTU_VERSION=14
else
   echo -e "${RED}You are not running Ubuntu 14.04, 16.04, 18.04 or 20.04 Installation is cancelled.${NC}"
   exit 1
fi
}

function checks() {
 detect_ubuntu
if [[ $EUID -ne 0 ]]; then
   echo -e "${RED}$0 must be run as root.${NC}"
   exit 1
fi
}

function prepare_system_for_download() {
echo -e "Prepare the system to install ${GREEN}$COIN_NAME${NC} master node."
apt-get update >/dev/null 2>&1
echo -e "Installing required packages, it may take some time to finish.${NC}"
apt-get update >/dev/null 2>&1
apt-get install -y build-essential pkg-config libc6-dev m4 g++-multilib autoconf libtool ncurses-dev unzip git python python-zmq zlib1g-dev wget bsdmainutils automake curl libgomp1 systemd figlet >/dev/null 2>&1
if [ "$?" -gt "0" ];
  then
    echo -e "${RED}Not all required packages were installed properly. Try to install them manually by running the following commands:${NC}\n"
    echo "apt-get update"
    echo "apt-get install -y build-essential pkg-config libc6-dev m4 g++-multilib autoconf libtool ncurses-dev unzip git python python-zmq zlib1g-dev wget bsdmainutils automake curl libgomp1 systemd figlet >/dev/null 2>&1
"
 exit 1
fi

clear
}

function create_swap() {
 echo -e "Checking if swap space is needed."
 PHYMEM=$(free -g|awk '/^Mem:/{print $2}')
 SWAP=$(swapon -s)
 if [[ "$PHYMEM" -lt "2"  &&  -z "$SWAP" ]]
  then
    echo -e "${GREEN}Server is running with less than 2G of RAM without SWAP, creating 6G swap file.${NC}"
    SWAPFILE=$(mktemp)
    dd if=/dev/zero of=$SWAPFILE bs=1024 count=6M
    chmod 600 $SWAPFILE
    mkswap $SWAPFILE
    swapon -a $SWAPFILE
 else
  echo -e "${GREEN}The server running with at least 2G of RAM, or a SWAP file is already in place.${NC}"
 fi
 clear
}


function important_information() {
 echo
 echo -e "================================================================================"
 echo -e "$COIN_NAME Masternode is up and running listening on port ${RED}$COIN_PORT${NC}."
 echo -e "Configuration file is: ${RED}$CONFIGFOLDER/$CONFIG_FILE${NC}"
 if (( $UBUNTU_VERSION == 16 || $UBUNTU_VERSION == 18 || $UBUNTU_VERSION == 20 )); then
   echo -e "Start: ${RED}systemctl start $COIN_NAME.service${NC}"
   echo -e "Stop: ${RED}systemctl stop $COIN_NAME.service${NC}"
   echo -e "Status: ${RED}systemctl status $COIN_NAME.service${NC}"
 else
   echo -e "Start: ${RED}/etc/init.d/$COIN_NAME start${NC}"
   echo -e "Stop: ${RED}/etc/init.d/$COIN_NAME stop${NC}"
   echo -e "Status: ${RED}/etc/init.d/$COIN_NAME status${NC}"
 fi
 echo -e "VPS_IP:PORT ${RED}$NODEIP:$COIN_PORT${NC}"
 echo -e "MASTERNODE PRIVATEKEY is: ${RED}$COINKEY${NC}"
 echo -e "Check if $COIN_NAME is running by using the following command:\n${RED}ps -ef | grep $COIN_DAEMON | grep -v grep${NC}"
 echo -e "================================================================================"
}

function setup_node() {
  get_ip
  create_config
  echo -e "${YELLOW}"
  figlet -f slant "Vidulum"
  create_key
  echo -e "${YELLOW}"
  figlet -f slant "Vidulum"
  update_config
  enable_firewall
  important_information
  if (( $UBUNTU_VERSION == 16 || $UBUNTU_VERSION == 18 )); then
    configure_systemd
  else
    configure_startup
  fi
}


##### Main #####
clear

checks
create_swap
prepare_system_for_download
download_node
setup_node

# If you want to support me
# vdl wallet : 
# v1MYFzCiHPgbzFbesutnEwMs5Z37pACoVp4