Congratulations, you have now assembled your Strobe-Enhaced Microscope Station.
{{BOM}}
Your completed station should now look like these pictures.
To power up your station you will need two 5V/3A power supplies: one with a USB-C connector{qty:1} for the Raspberry Pi and one with a male 5.5x2.1mm jack connector{qty:1} for the strobe illumination.
Use a voltage regulator{qty:1} to supply 3V to the strobe. Higher voltage can damage it.
Setting up the software is included in the next section of instructions. It is detailed in "Software Installation" page. Using the software is described in the "Use your Station" page.