tilt angle

[hwl26]

"tilt_max — Maximum tilt angle in degrees. Default: 60. Override if your tilt range is different.
tilt_min — Minimum tilt angle in degrees. Default: -60. Override if your tilt range is different."

Sorry, I’m confused about how these two values are set.
Could I ask whether the pre-tilt angle is already taken into account here?

[procyontao]

Pre-tilt does not need to be entered separately here.

Please use the final minimum and maximum tilt angles used in your final reconstruction from your .tlt or .aln file. In other words, use the final aligned tilt range, not the nominal acquisition range plus an extra pre-tilt correction.

I updated the docs to reflect that. https://github.com/IsoNet-cryoET/IsoNet2/tree/d1128e44ee4e7086a1ad5b23fb759e77c009b280