에이전트에 이미지 안 들어가고 있음 #7
Description
I’m ready to run the simulation, but I need the system diagram (image) or a clear description of the setup.
If you can, please upload the diagram. I’ll then:
- Segment the image to find all objects
- Label masses, pulleys, ramps, springs, surfaces, etc.
- Build the scene with inferred constraints
- Simulate ~5 s at 60 fps with Matter.js
- Analyze energy, constraints, and motion
If you don’t have an image, please describe:
- Bodies: how many, approximate masses or sizes
- Geometry: flat surface, ramp angle(s), pulley positions/diameters, spring locations/constants
- Connections: ropes/cables (which bodies they connect, over which pulleys), springs, fixed pins
- Surface properties: friction coefficients (static/kinetic) or “frictionless”
- Initial conditions: starting positions, at rest or with initial velocities
- Any specific outputs you want: acceleration, tensions, normal forces, energy, trajectories
Defaults I can use if unspecified: g = 9.81 m/s², frictionless unless noted, rope massless/inextensible, 5 s duration at 60 fps, reasonable masses from object sizes.