diff --git a/UserMods/N3MI-DG/Belt_Helper_3mm/README.md b/UserMods/N3MI-DG/Belt_Helper_3mm/README.md
index e2464ba0..8270cd8a 100644
--- a/UserMods/N3MI-DG/Belt_Helper_3mm/README.md
+++ b/UserMods/N3MI-DG/Belt_Helper_3mm/README.md
@@ -1,8 +1,11 @@
 # Belthelper 3mm Spacing (Micron, V0, etc.)
+
+<img src="images/image.png" width="600">
+
 In order to save y space and make it easier to attach belts to the shuttle backside you can use these clips to hold and tension all 4 belts.
 
-you need to have 15 belt bumps visible from the beltclip on each belt. this should leave the center beltline on the shuttle free and give equal clamping to all belts.
+You need to have 15 belt bumps visible from the belt clip on each belt. This should leave the center beltline on the shuttle free and give equal clamping to all belts.
 
-the distance between both block at the tensioner screws should be 6mm between them when everything is "set" and the shuttle is ready to screw on. This is all according to cad and you might have to adjust the spaving to fit your prints. hence the tenstioning screws.
+The distance between both block at the tensioner screws should be 6mm between them when everything is "set" and the shuttle is ready to screw on. This is all according to cad and you might have to adjust the spacing to fit your prints. Hence the tensioning screws.
 
-note: belts must be equal length before you start the process.
\ No newline at end of file
+**Note:** Belts must be equal length before you start the process.
\ No newline at end of file
diff --git a/UserMods/N3MI-DG/Belt_Helper_3mm/images/image.png b/UserMods/N3MI-DG/Belt_Helper_3mm/images/image.png
new file mode 100644
index 00000000..96191a3b
Binary files /dev/null and b/UserMods/N3MI-DG/Belt_Helper_3mm/images/image.png differ
diff --git a/UserMods/N3MI-DG/StealthBurner_SC_Barf/README.md b/UserMods/N3MI-DG/StealthBurner_SC_Barf/README.md
index afeff406..fe6da3c8 100644
--- a/UserMods/N3MI-DG/StealthBurner_SC_Barf/README.md
+++ b/UserMods/N3MI-DG/StealthBurner_SC_Barf/README.md
@@ -1,5 +1,10 @@
-SCbarf StealthBurner
+# StealthBurner SC Barf
 
-![](/images/screenshot.png)
-![](/images/screenshot2.png)
-![](/images/photo.jpg)
\ No newline at end of file
+Adds SC Barf to the StealthBurner toolhead.
+![](images/photo.jpg)
+<br>
+![](images/screenshot2.png)
+<br>
+![](images/screenshot.png)
+<br>
+Credits: [Voron Design](https://github.com/VoronDesign/Voron-Stealthburner)
\ No newline at end of file