What to do

[AntonJoha]

There are a number of commands which need to be implemented. They are listed below but should later get their own issues as needed.

• Horizontal tab
• Print and line feed
• Print and return to Standard mode (in Page mode)
• End job (in Standard mode)
• Print and carriage return
• Transmit real-time status
• Send real-time request to printer
• Generate pulse in real-time
• Execute power-off sequence
• Sound buzzer in real-time
• Transmit specified status in real time
• Clear buffer(s)
• Cancel print data in Page mode
• Print data in Page mode
• Set right-side character spacing
• Select print mode(s)
• Set absolute print position
• Select/cancel user-defined character set
• Define user-defined characters
• Control beeper tones
• Beep the buzzer
• Model specific buzzer control (fn=97)
• Model specific buzzer control (fn=98)
• Model specific buzzer control (fn=99)
• Specify batch print
• Select bit-image mode
• Turn underline mode on/off
• Select default line spacing
• Set line spacing
• Return home
• Select peripheral device
• Cancel user-defined characters
• Initialize printer
• Set horizontal tab positions
• Turn emphasized mode on/off
• Turn double-strike mode on/off
• Print and feed paper
• Print and reverse feed
• Select Page mode
• Select character font
• Select an international character set
• Select Standard mode
• Select print direction in Page mode
• Turn unidirectional print mode on/off
• Turn 90° clockwise rotation mode on/off
• Set print area in Page mode
• Set relative print position
• Select justification
• Select paper sensor(s) to output paper-end signals
• Select paper sensor(s) to stop printing
• Enable/disable panel buttons
• Print and feed n lines
• Print and reverse feed n lines
• Partial cut (one point left uncut)
• Partial cut (three points left uncut)
• Generate pulse
• Select print color
• Select character code table
• Transmit peripheral device status
• Transmit paper sensor status
• Turn upside-down print mode on/off
• Select print mode(s) for Kanji characters
• Select Kanji character mode
• Select Kanji character style(s)
• Select Kanji character font
• Select code conversion method
• Select character encode system
• Set font priority
• Group of commands for receipt enhancement control
• Transmit set values for top/bottom logo printing
• Set top logo printing
• Set bottom logo printing
• Make extended settings for top/bottom logo printing
• Enable/disable top/bottom logo printing
• Select label and black mark control function(s)
• Paper layout setting
• Paper layout information transmission
• Transmit the positioning information
• Feed paper to the label peeling position
• Feed paper to the cutting position
• Feed paper to the print starting position
• Paper layout error special margin setting
• Enable/disable Automatic Status Back (ASB) for optional functions (extended status)
• Turn underline mode on/off for Kanji characters
• Cancel Kanji character mode
• Define user-defined Kanji characters
• Cancel user-defined Kanji characters
• Select Kanji character code system
• Set Kanji character spacing
• Turn quadruple-size mode on/off for Kanji characters
• Write to NV user memory
• Read from NV user memory
• Print NV bit image
• Define NV bit image
• Select character size
• Set absolute vertical print position in Page mode
• Execute test print
• Edit NV user memory
• Delete the specified record
• Store the data in the specified record
• Transmit the data in the specified record
• Transmit capacity of the NV user memory currently being used
• Transmit the remaining capacity of the NV user memory
• Transmit the key code list
• Delete all data in the NV user memory
• Enable/disable real-time command
• Set user setup commands
• Change into the user setting mode
• End the user setting mode session
• Change the memory switch
• Change the memory switch
• Set the customized setting values
• Transmit the customized setting values
• Copy the user-defined page
• Define the data (column format) for the character code page
• Define the data (raster format) for the character code page
• Delete the data for the character code page
• Set the configuration item for the serial interface
• Transmit the configuration item for the serial interface
• Set the configuration item for the Bluetooth interface
• Transmit the configuration item for the Bluetooth interface
• Set conditions for USB interface communication
• Transmit conditions for USB interface communication
• Delete the paper layout
• Set the paper layout
• Transmit the paper layout information
• Set the control for label paper and paper with black marks
• Transmit the control settings for label paper and paper with black marks
• Set internal buzzer patterns
• Transmit internal buzzer patterns
• Request transmission of response or status
• Specifies the process ID response
• Specifies the offline response
• Select print control method(s)
• Select the print control mode
• Select the print density
• Select the print speed
• Select the number of parts for the thermal head energizing
• Set graphics data
• Transmit the NV graphics memory capacity
• Set the reference dot density for graphics
• Print the graphics data in the print buffer
• Transmit the remaining capacity of the NV graphics memory
• Transmit the remaining capacity of the download graphics memory
• Transmit the key code list for defined NV graphics
• Delete all NV graphics data
• Delete the specified NV graphics data
• Define the NV graphics data (raster format)
• Define the NV graphics data (column format)
• Print the specified NV graphics data
• Transmit the key code list for defined download graphics
• Delete all download graphics data
• Delete the specified download graphics data
• Define the download graphics data (raster format)
• Define the download graphics data (column format)
• Print the specified download graphics data
• Store the graphics data in the print buffer (raster format)
• Store the graphics data in the print buffer (column format)
• Customize printer control value(s)
• Save the setting values from the work area into the storage area
• Load the setting values stored in the storage area to the work area
• Select the setting values loaded to the work area after the initialization process
• Select character effects
• Select character color
• Select background color
• Turn shading mode on/off
• Page mode control
• Set the printable area in Page mode
• Commands for drawing graphics
• Draw line
• Draw rectangle
• Specify paper cut
• Paper cut
• Paper feed and cut
• Paper cut reservation
• Set up and print the symbol
• PDF417: Set the number of columns in the data region
• PDF417: Set the number of rows
• PDF417: Set the width of the module
• PDF417: Set the row height
• PDF417: Set the error correction level
• PDF417: Select the options
• PDF417: Store the data in the symbol storage area
• PDF417: Print the symbol data in the symbol storage area
• PDF417: Transmit the size information of the symbol data in the symbol storage area
• QR Code: Select the model
• QR Code: Set the size of module
• QR Code: Select the error correction level
• QR Code: Store the data in the symbol storage area
• QR Code: Print the symbol data in the symbol storage area
• QR Code: Transmit the size information of the symbol data in the symbol storage area
• MaxiCode: Select the mode
• MaxiCode: Store the data in the symbol storage area
• MaxiCode: Print the symbol data in the symbol storage area
• MaxiCode: Transmit the size information of the symbol data in the symbol storage area
• 2-dimensional GS1 DataBar: Set the width of the module
• 2-dimensional GS1 DataBar: GS1 DataBar Expanded Stacked maximum width setting
• 2-dimensional GS1 DataBar: Store data in the symbol storage area
• 2-dimensional GS1 DataBar: Print the symbol data in the symbol storage area
• 2-dimensional GS1 DataBar: Transmit the size information of the symbol data in the symbol storage area
• Composite Symbology: Set the width of the module
• Composite Symbology: GS1 DataBar Expanded Stacked maximum width setting
• Composite Symbology: Select HRI character font
• Composite Symbology: Store the data in the symbol storage area
• Composite Symbology: Print the symbol data in the symbol storage area
• Composite Symbology: Transmit the size information of the symbol data in the symbol storage area
• Aztec Code: Set the number of mode types and data layers
• Aztec Code: Set the size of the module
• Aztec Code: Set the error correction level
• Aztec Code: Store the data in the symbol storage area
• Aztec Code: Print the symbol data in the symbol storage area
• Aztec Code: Transmit the size information of the symbol data in the symbol storage area
• DataMatrix: Set the symbol type, number of columns, number of rows
• DataMatrix: Set the size of the module
• DataMatrix: Store the data in the symbol storage area
• DataMatrix: Print the symbol data in the symbol storage area
• DataMatrix: Transmit the size information of the symbol data in the symbol storage area
• Define downloaded bit image
• Print downloaded bit image
• Start/end macro definition
• Turn white/black reverse print mode on/off
• Select counter print mode
• Select count mode (A)
• Set counter
• Select count mode (B)
• Specify Windows BMP graphics data
• Define Windows BMP NV graphics data
• Define Windows BMP download graphics data
• Select print position of HRI characters
• Transmit printer ID
• Set left margin
• Set horizontal and vertical motion units
• Print variable vertical size bit image
• Set print position to the beginning of print line
• Select cut mode and cut paper
• Set print area width
• Set relative vertical print position in Page mode
• Execute macro
• Enable/disable Automatic Status Back (ASB)
• Turn smoothing mode on/off
• Print counter
• Select font for HRI characters
• Initialize maintenance counter
• Transmit maintenance counter
• Set barcode height
• Enable/disable Automatic Status Back (ASB) for ink
• Print barcode
• Transmit status
• Print raster bit image
• Set barcode width
• Set online recovery wait time

[AntonJoha]

Initialize printer is done in the new function