ADSB Module & Flight Radar JSON File

[SkyDragon2023]

I've taken the plunge and updated the modules to get the ADSB function, I've setup my old Pi3 B+ with a dongle and connected to Flight Radar 24.
Its working fine, I can see the data on there site and locally via the Pi software, I can even see the JSON file it uses. But I can't get the ADSB module to work, it keeps saying in the debug "Wrote 1 aircraft to extra data file allskyadsb.json".
I have configured the module to use local data source and the local ADSB address I have used is: http://192.168.1.81/dump1090/data/aircraft.json
If I copy that address into the web browser I can see the file data and see it been updated.
I've taken a look and there is nothing in the file. And there is nothing in the overlay manager to do with this module - I expect that is because there is nothing in the file the module creates?
The Flight radar JSON file is getting updated, I've attached a copy & also a copy of the allskyadsb.json file
aircraft.json
allskyadsb.json

[Alex-developer]

Few things

1. Check the range setting in the adsb module
2. Can you set allsky t debug level 4 let it run for a little while then attach the support infi

Thanks

[SkyDragon2023]

support-repo-type-none-20251108222813.zip
The range is set to 60
I've let it run and in the periodic log it reports it's ignoring planes due to missing airspeed.
allskyperiodic.log

[Alex-developer]

support-repo-type-none-20251108222813.zip The range is set to 60 I've let it run and in the periodic log it reports it's ignoring planes due to missing airspeed. allskyperiodic.log

I have some fairly tight checks in the module to eliminate aircraft with missing data. It looks like your adsb data has 'speed' rather than 'ias' which I am looking for,

I'll change the module to work with 'speed' as well

Thanks

Alex

[SkyDragon2023]

Cheers, I expect all the flight data software is different, must make it tricky for you.

[Alex-developer]

Cheers, I expect all the flight data software is different, must make it tricky for you.

If only they were all consistent !!!

I have added a Changs so please reinstall the adsb module and see if that helps

[SkyDragon2023]

Yes its working!
I had to manually delete the ADSB module folder from the allsky folder as it wouldn't reinstall over the top, But its working now!
Is the range limit miles or kilometres?
Also there is a typo in the readme for the ADSB in the instructions to update the database, its missing a y in allsky
Once again thanks for work put into these modules.

[Alex-developer]

Yes its working! I had to manually delete the ADSB module folder from the allsky folder as it wouldn't reinstall over the top, But its working now! Is the range limit miles or kilometres? Also there is a typo in the readme for the ADSB in the instructions to update the database, its missing a y in allsky Once again thanks for work put into these modules.

It will be Nautical Miles, the standard in aviation. I should probably add that to the setting so people know

Thanks I'll fix the type for the next release