instructions/firstprint/

[giscus[bot]]

instructions/firstprint/

https://3ms.3dcoded.xyz/instructions/firstprint/

[czoliver]

There appears to be a small formatting issue here I think "Disable Tip Forming
Set all the indicated fields to 0 and open the ramming settings. 0f8f127c"

[3DCoded]

Hi @czoliver,

Thank you for pointing that out. I've pushed a fix.

[dcanales2]

I did all this but it won't do the cutting, it just tries to do a tip forming instead

[3DCoded]

I did all this but it won't do the cutting, it just tries to do a tip forming instead

Hi @dcanales2 ,

Did you configure Happy Hare to use your cutting macro?

[Scottnella]

Hi I'll be trying this using a BTT SKR Mini E3 V2.
I would appreciate any advice on which board mount or bottom unit would be correct for this board.
I'm trying to do this mostly with parts scavenged from a heavily modified but retired Ender 3 Pro.
Any advice would be appreciated.

[3DCoded]

Hi @Scottnella ,

You can use the 3MS with the SKR Mini E3 V2 (I actually did for a while before migrating to the SKR Pico). I assume you’re using the 3HOME, in which case there isn’t an official mount for the SKR Mini. You can either use the provided STEP files to design a mount, or mount it externally using a generic bracket and run the wires to the 3HOME.

[carl1961]

Ender 3 Pro looks identical to BTT SKR Mini E3 V2

here I laid the Ender 3 pro board on top of SKR mini, assuming the cad file or correct, they should be.